High-performance direct conversion X-ray detectors based on sintered hybrid lead triiodide perovskite wafers S Shrestha, R Fischer, GJ Matt, P Feldner, T Michel, A Osvet, I Levchuk, ... Nature Photonics 11 (7), 436-440, 2017 | 517 | 2017 |
An improved long-term nanoindentation creep testing approach for studying the local deformation processes in nanocrystalline metals at room and elevated temperatures V Maier, B Merle, M Göken, K Durst Journal of Materials Research 28 (9), 1177-1188, 2013 | 166 | 2013 |
Fracture toughness of silicon nitride thin films of different thicknesses as measured by bulge tests B Merle, M Göken Acta Materialia 59 (4), 1772-1779, 2011 | 118 | 2011 |
Influence of modulus-to-hardness ratio and harmonic parameters on continuous stiffness measurement during nanoindentation B Merle, V Maier-Kiener, GM Pharr Acta materialia 134, 167-176, 2017 | 102 | 2017 |
Effective usage of 2D MXene nanosheets as solid lubricant–Influence of contact pressure and relative humidity M Marian, GC Song, B Wang, VM Fuenzalida, S Krauß, B Merle, ... Applied Surface Science 531, 147311, 2020 | 100 | 2020 |
High-pressure synthesis of ultraincompressible hard rhenium nitride pernitride Re2(N2)(N)2 stable at ambient conditions M Bykov, S Chariton, H Fei, T Fedotenko, G Aprilis, AV Ponomareva, ... Nature communications 10 (1), 2994, 2019 | 75 | 2019 |
Ti3C2Tx solid lubricant coatings in rolling bearings with remarkable performance beyond state-of-the-art materials M Marian, K Feile, B Rothammer, M Bartz, S Wartzack, A Seynstahl, ... Applied Materials Today 25, 101202, 2021 | 74 | 2021 |
Critical issues in conducting constant strain rate nanoindentation tests at higher strain rates B Merle, WH Higgins, GM Pharr Journal of Materials Research 34 (20), 3495-3503, 2019 | 59 | 2019 |
Understanding the extremely low fracture toughness of freestanding gold thin films by in-situ bulge testing in an AFM EI Preiß, B Merle, M Göken Materials Science and Engineering: A 691, 218-225, 2017 | 57 | 2017 |
Influence of stacking fault energy and dislocation character on slip transfer at coherent twin boundaries studied by micropillar compression JP Liebig, S Krauß, M Göken, B Merle Acta Materialia 154, 261-272, 2018 | 56 | 2018 |
Fracture toughness evaluation of NiAl single crystals by microcantilevers—a new continuous J-integral method J Ast, B Merle, K Durst, M Göken Journal of Materials Research 31 (23), 3786-3794, 2016 | 55 | 2016 |
Room temperature deposition of functional ceramic films on low-cost metal substrate NH Khansur, U Eckstein, L Benker, U Deisinger, B Merle, KG Webber Ceramics International 44 (14), 16295-16301, 2018 | 49 | 2018 |
Experimental determination of the effective indenter shape and ε-factor for nanoindentation by continuously measuring the unloading stiffness B Merle, V Maier, M Göken, K Durst Journal of Materials Research 27 (1), 214-221, 2012 | 41 | 2012 |
Evaluation of the surface fatigue behavior of amorphous carbon coatings through cyclic nanoindentation T Weikert, S Wartzack, MV Baloglu, K Willner, S Gabel, B Merle, F Pineda, ... Surface and Coatings Technology 407, 126769, 2021 | 40 | 2021 |
Extending the range of constant strain rate nanoindentation testing B Merle, WH Higgins, GM Pharr Journal of Materials Research 35 (4), 343-352, 2020 | 39 | 2020 |
Bulge fatigue testing of freestanding and supported gold films B Merle, M Göken Journal of Materials Research 29 (2), 267-276, 2014 | 38 | 2014 |
Amorphous carbon coatings for total knee replacements—part i: deposition, Cytocompatibility, chemical and mechanical properties B Rothammer, K Neusser, M Marian, M Bartz, S Krauß, T Böhm, S Thiele, ... Polymers 13 (12), 1952, 2021 | 33 | 2021 |
Mechanical characterization of metallic thin films by bulge and scratch testing H Javed, B Merle, E Preiß, R Hivet, A Benedetto, M Göken Surface and Coatings Technology 289, 69-74, 2016 | 33 | 2016 |
Amorphous carbon coatings for total knee replacements—Part II: tribological behavior B Rothammer, M Marian, K Neusser, M Bartz, T Böhm, S Krauß, ... Polymers 13 (11), 1880, 2021 | 31 | 2021 |
Microstructure, Mechanical Properties and Tribological Behavior of Magnetron-Sputtered MoS2 Solid Lubricant Coatings Deposited under Industrial Conditions A Seynstahl, S Krauß, E Bitzek, B Meyer, B Merle, S Tremmel Coatings 11 (4), 455, 2021 | 30 | 2021 |