| Effect of infill pattern and infill density at varying part orientation on tensile properties of fused deposition modeling-printed poly-lactic acid part HK Dave, NH Patadiya, AR Prajapati, SR Rajpurohit Proceedings of the Institution of Mechanical Engineers, Part C: Journal of …, 2021 | 128 | 2021 |
| Investigation on tensile strength and failure modes of FDM printed part using in-house fabricated PLA filament HK Dave, AR Prajapati, SR Rajpurohit, NH Patadiya, HK Raval Advances in Materials and Processing Technologies 8 (1), 576-597, 2022 | 45 | 2022 |
| Effect of fiber volume fraction on the impact strength of fiber reinforced polymer composites made by FDM process AR Prajapati, HK Dave, HK Raval Materials Today: Proceedings 44, 2102-2106, 2021 | 45 | 2021 |
| Effect of multi-infill patterns on tensile behavior of FDM printed parts HK Dave, BH Patel, SR Rajpurohit, AR Prajapati, D Nedelcu Journal of the Brazilian Society of Mechanical Sciences and Engineering 43 …, 2021 | 43 | 2021 |
| An experimental study on mechanical, thermal and flame-retardant properties of 3D-printed glass-fiber-reinforced polymer composites AR Prajapati, HK Dave, HK Raval Journal of Materials Engineering and Performance 30, 5266-5277, 2021 | 37 | 2021 |
| Open hole tensile testing of 3D printed parts using in-house fabricated PLA filament HK Dave, AR Prajapati, SR Rajpurohit, NH Patadiya, HK Raval Rapid Prototyping Journal 26 (1), 21-31, 2020 | 29 | 2020 |
| Effect of fiber reinforcement on the open hole tensile strength of 3D printed composites AR Prajapati, HK Dave, HK Raval Materials Today: Proceedings 46, 8629-8633, 2021 | 20 | 2021 |
| Specific energy absorption during compression testing of ABS and FPU parts fabricated using LCD-SLA based 3D printer HK Dave, RT Karumuri, AR Prajapati, SR Rajpurohit Rapid Prototyping Journal 28 (8), 1530-1540, 2022 | 13 | 2022 |
| Influence of fiber rings on impact strengthof 3d printed fiber reinforced polymer composite AR Prajapati, HK Dave, HK Raval Manuf. Technol 12, 157-163, 2020 | 11 | 2020 |
| Impact energy absorption and fracture mechanism of FFF made fiberglass reinforced polymer composites AR Prajapati, HK Dave, HK Raval Rapid Prototyping Journal 29 (2), 275-287, 2023 | 10 | 2023 |
| Formation and applications of single crystal material AR Prajapati, SR Rajpurohit Indian J. Sci. Res. 17 (2), 53-59, 2017 | 9 | 2017 |
| Study on compression properties of ABS and FPU parts printed using SLA RT Karumuri, HK Dave, SR Rajpurohit, AR Prajapati Advances in Manufacturing Processes: Select Proceedings of RAM 2020, 319-328, 2020 | 4 | 2020 |
| Analysis of Compressive Strength of 3D Printed PLA Part AR Prajapati, SR Rajpurohit, NH Patadiya, HK Dave Advances in Manufacturing Processes: Select Proceedings of RAM 2020, 295-304, 2020 | 4 | 2020 |
| Investigation on quality of in-house fabricated PLA filament for 3D printing application AR Prajapati, HK Dave, SR Rajpurohit Advances in Additive Manufacturing and Joining: Proceedings of AIMTDR 2018 …, 2019 | 3 | 2019 |
| Optimization of Electrodischarge Machining Parameters Using Non-traditional Optimization Techniques K Agarwal, S Joshi, D Asudani, D Savani, D Patel, AR Prajapati, KP Desai, ... Recent Advances in Manufacturing Modelling and Optimization: Select …, 2022 | 2 | 2022 |
| Application of neural network to predict printability of polycaprolactone using FDM R Narkhede, RT Karumuri, AR Prajapati, HK Dave Advances in Manufacturing Systems: Select Proceedings of RAM 2020, 263-276, 2021 | 2 | 2021 |
| ANFIS-Based prediction model for tool wear criteria during orbital electrical discharge machining of Ti6Al4V NH Sagathiya, AR Prajapati, KP Desai, HK Dave Advances in Manufacturing Systems: Select Proceedings of RAM 2020, 277-291, 2021 | 1 | 2021 |
| Computational Models: 3D Printing, Materials and Structures AR Prajapati, SR Rajpurohit, M Somireddy Fused Deposition Modeling Based 3D Printing, 403-417, 2021 | 1 | 2021 |
