| Modified embedded-atom method interatomic potentials for Ti and Zr YM Kim, BJ Lee, MI Baskes Physical Review B—Condensed Matter and Materials Physics 74 (1), 014101, 2006 | 273 | 2006 |
| Modified embedded-atom method interatomic potentials for the Ti–C and Ti–N binary systems YM Kim, BJ Lee Acta materialia 56 (14), 3481-3489, 2008 | 164 | 2008 |
| A kinetic model for the Ruhrstahl Heraeus (RH) degassing process MA Van Ende, YM Kim, MK Cho, J Choi, IH Jung Metallurgical and materials transactions B 42, 477-489, 2011 | 136 | 2011 |
| Atomistic modeling of pure Mg and Mg–Al systems YM Kim, NJ Kim, BJ Lee Calphad 33 (4), 650-657, 2009 | 136 | 2009 |
| The dynamic transformation of deformed austenite at temperatures above the Ae3 C Ghosh, VV Basabe, JJ Jonas, YM Kim, IH Jung, S Yue Acta Materialia 61 (7), 2348-2362, 2013 | 111 | 2013 |
| Investigation of anisotropic diffusion behavior of Zn in hcp Mg and interdiffusion coefficients of intermediate phases in the Mg–Zn system SK Das, YM Kim, TK Ha, IH Jung Calphad 42, 51-58, 2013 | 86 | 2013 |
| Modified embedded-atom method interatomic potentials for pure Mn and the Fe–Mn system YM Kim, YH Shin, BJ Lee Acta Materialia 57 (2), 474-482, 2009 | 85 | 2009 |
| Anisotropic diffusion behavior of Al in Mg: diffusion couple study using Mg single crystal SK Das, YM Kim, TK Ha, R Gauvin, IH Jung Metallurgical and Materials Transactions A 44, 2539-2547, 2013 | 75 | 2013 |
| Atomistic modeling of pure Li and Mg–Li system YM Kim, IH Jung, BJ Lee Modelling and Simulation in Materials Science and Engineering 20 (3), 035005, 2012 | 61 | 2012 |
| Effect of process parameters on deposition properties of functionally graded STS 316/Fe manufactured by laser direct metal deposition S Nam, H Cho, C Kim, YM Kim Metals 8 (8), 607, 2018 | 56 | 2018 |
| A modified embedded-atom method interatomic potential for the Cu–Zr system YM Kim, BJ Lee Journal of Materials Research 23 (4), 1095-1104, 2008 | 56 | 2008 |
| Effect of heating parameters on laser welded tailored blanks of hot press forming steel M Kang, YM Kim, C Kim Journal of Materials Processing Technology 228, 137-144, 2016 | 53 | 2016 |
| Formation of Mn-depleted zone in Ti-containing weld metals K Seo, Y Kim, GM Evans, HJ Kim, C Lee Welding in the World 59, 373-380, 2015 | 37 | 2015 |
| Real-time weld quality prediction using a laser vision sensor in a lap fillet joint during gas metal arc welding K Lee, I Hwang, YM Kim, H Lee, M Kang, J Yu Sensors 20 (6), 1625, 2020 | 30 | 2020 |
| Characterization of inclusions formed in Ti-containing steel weld metals K Seo, YM Kim, HJ Kim, C Lee ISIJ International 55 (8), 1730-1738, 2015 | 27 | 2015 |
| Effect of welding time on resistance spot weldability of aluminum 5052 alloy GC Kim, I Hwang, M Kang, D Kim, H Park, YM Kim Metals and Materials International 25, 207-218, 2019 | 23 | 2019 |
| Influence of heat-treated Al–Si coating on the weldability and microstructural inhomogeneity for hot stamped steel resistance nut projection welds EJ Chun, SS Lim, YT Kim, KS Nam, YM Kim, YW Park, SP Murugan, ... Metals and Materials International 25, 179-192, 2019 | 22 | 2019 |
| Effect of weld bead shape on the fatigue behavior of GMAW lap fillet joint in GA 590 MPa steel sheets I Hwang, DY Kim, G Jeong, M Kang, D Kim, YM Kim Metals 7 (10), 399, 2017 | 20 | 2017 |
| Prediction of the weld qualities using surface appearance image in resistance spot welding SG Choi, I Hwang, YM Kim, B Kang, M Kang Metals 9 (8), 831, 2019 | 19 | 2019 |
| Effect of porosity on the fatigue behavior of gas metal arc welding lap fillet joint in GA 590 MPa steel sheets DY Kim, I Hwang, G Jeong, M Kang, D Kim, J Seo, YM Kim Metals 8 (4), 241, 2018 | 19 | 2018 |
