| Cross-axis control system design for borehole drilling based on damping optimum criterion and utilization of proportional-integral controllers D Pavković, P Šprljan, M Cipek, M Krznar Optimization and Engineering 22 (1), 51-81, 2021 | 20 | 2021 |
| Laboratory prototyping of control system retrofitting designs for oil drilling applications P Šprljan, D Pavković, M Klaić, T Staroveški, M Cipek Proceedings of 10 th International Scientific Conference on Management of …, 2018 | 12 | 2018 |
| Automation Systems Design and Laboratory Prototyping Aimed at Mature Petroleum Drilling Rig Retrofitting P Šprljan, M Cipek, M Klaić, T Staroveški, D Kolar Tehnički vjesnik 27 (1), 229-236, 2020 | 8 | 2020 |
| Damping Optimum Tuning of Drill-string Torque-based Torsional Vibrations Suppression System D Pavković, M Cipek, F Plavac, P Šprljan, G Jurišić IEEE EUROCON 2019-18th International Conference on Smart Technologies, 1-6, 2019 | 3 | 2019 |
| Some recent results of automated drilling and torsional vibration active damping R&D aimed at mature drilling systems retrofitting D Pavković, M Cipek, P Šprljan, G Jurišić Proc. of IX International Oil, Gas & Primary Energy Conference and …, 2017 | 1 | 2017 |
| Damping optimum-based design of direct-current microgrid voltage control system with disturbance and fault robustness analysis D Pavković, M Hrgetić, M Doko, M Cipek, P Šprljan Digital proceedings of 3rd South East Europe (SEE) Sustainable Development …, 2018 | | 2018 |
| SOFT DRIVE-A Torsional Vibration Active Damping System Equipped with Back-Spinning Prevention D Pavković, P Šprljan | | 2018 |
| Hardware-in-the-Loop laboratory testing of developed hydrocarbon drilling facility automation systems P Šprljan, G Jurišić, G Bibić, T Geceg, H Lovrić, D Pavković, M Cipek Q8/2017 project report, 2017 | | 2017 |
| Conceptual design of drill-string and mud pump electrical drives control systems and test environment for real-time Hardware-in-the-Loop drilling system emulation P Šprljan, G Jurišić, G Bibić, T Geceg, H Lovrić, D Pavković, M Cipek Q5/2017 project report, 2017 | | 2017 |
| Experimental testing of drilling system concepts using real-time Hardware-in-the-Loop drilling system experimental setup P Šprljan, G Jurišić, G Bibić, T Geceg, H Lovrić, D Pavković, M Cipek Q7/2017 project report, 2017 | | 2017 |
| Experimental setup for real-time Hardware-in-the-Loop oil drilling systems emulation P Šprljan, G Jurišić, G Bibić, T Geceg, H Lovrić, D Pavković, M Cipek Q6/2017 project report, 2017 | | 2017 |
| Modeling of drill-string drives for rotational and longitudinal motion during vertical drilling P Šprljan, G Jurišić, G Bibić, T Geceg, H Lovrić, D Pavković, M Cipek | | 2016 |
| Control system concepts for drill-string and mud pump electrical drives for straight drilling operations P Šprljan, G Jurišić, G Bibić, T Geceg, H Lovrić, D Pavković, M Cipek | | 2016 |
| Comparative analysis of drilling equipment (Market survey) P Šprljan, G Jurišić, G Bibić, T Geceg, H Lovrić, D Pavković, M Cipek | | 2016 |
| Control system design, verification and stability analysis for drill-string and mud pump electrical drives for drilling operations P Šprljan, G Jurišić, G Bibić, T Geceg, H Lovrić, D Pavković, M Cipek | | 2016 |
| Design and verification of simulation models for drill-string and mud pump electrical drives for straight drilling operations P Šprljan, G Jurišić, G Bibić, T Geceg, H Lovrić, D Pavković, M Cipek | | 2016 |
| Commissioning report-Helb Soft Drive system D Pavković, K Zdravko, P Šprljan, T Geceg, S Dwars | | 2015 |
| Islanded microgrid optimal control system to enhance small-signal stability P Šprljan, B Novaković, D Pavković Proceedings of the 14th Conference on Sustainable Development of Energy …, 0 | | |
| Cross-Axis Control System Design Suitable for Geothermal Well Drilling Systems D Pavković, P Šprljan, M Cipek Proceedings of the 14th Conference on Sustainable Development of Energy …, 0 | | |
| SOFT DRIVE D Pavković, P Šprljan | | |
