| Heat transfer and pressure drop characteristics during the in-tube cooling process of carbon dioxide in the supercritical region SH Yoon, JH Kim, YW Hwang, MS Kim, K Min, Y Kim International journal of refrigeration 26 (8), 857-864, 2003 | 351 | 2003 |
| Characteristics of evaporative heat transfer and pressure drop of carbon dioxide and correlation development SH Yoon, ES Cho, YW Hwang, MS Kim, K Min, Y Kim International Journal of refrigeration 27 (2), 111-119, 2004 | 229 | 2004 |
| Comparison of the heating performance of air-source heat pumps using various types of refrigerant injection J Heo, MW Jeong, C Baek, Y Kim International Journal of Refrigeration 34 (2), 444-453, 2011 | 175 | 2011 |
| Modeling of frost growth and frost properties with airflow over a flat plate R Yun, Y Kim, M Min International Journal of Refrigeration 25 (3), 362-371, 2002 | 170 | 2002 |
| The effects of improper refrigerant charge on the performance of a heat pump with an electronic expansion valve and capillary tube JM Choi, YC Kim Energy 27 (4), 391-404, 2002 | 168 | 2002 |
| Capacity modulation of an inverter-driven multi-air conditioner using electronic expansion valves JM Choi, YC Kim Energy 28 (2), 141-155, 2003 | 162 | 2003 |
| Heat transfer characteristics of flat plate finned-tube heat exchangers with large fin pitch Y Kim, Y Kim International Journal of Refrigeration 28 (6), 851-858, 2005 | 160 | 2005 |
| Convective boiling heat transfer characteristics of CO2 in microchannels R Yun, Y Kim, MS Kim International Journal of Heat and Mass Transfer 48 (2), 235-242, 2005 | 155 | 2005 |
| Effects of flash tank vapor injection on the heating performance of an inverter-driven heat pump for cold regions J Heo, MW Jeong, Y Kim International Journal of Refrigeration 33 (4), 848-855, 2010 | 146 | 2010 |
| Boiling heat transfer and dryout phenomenon of CO2 in a horizontal smooth tube R Yun, Y Kim, MS Kim, Y Choi International Journal of Heat and Mass Transfer 46 (13), 2353-2361, 2003 | 142 | 2003 |
| Thermodynamic analysis on the performance of a variable speed scroll compressor with refrigerant injection YC Park, Y Kim, H Cho International Journal of Refrigeration 25 (8), 1072-1082, 2002 | 141 | 2002 |
| Evaporative heat transfer and pressure drop of R410A in microchannels R Yun, JH Heo, Y Kim International journal of refrigeration 29 (1), 92-100, 2006 | 140 | 2006 |
| Evaporation heat transfer characteristics of R-410A in 7 and 9.52 mm smooth/micro-fin tubes Y Kim, K Seo, JT Chung International journal of refrigeration 25 (6), 716-730, 2002 | 131 | 2002 |
| An experimental study on water transport through the membrane of a PEFC operating in the dead-end mode Y Lee, B Kim, Y Kim International journal of hydrogen energy 34 (18), 7768-7779, 2009 | 130 | 2009 |
| Mass flow characteristics and empirical modeling of R22 and R410A flowing through electronic expansion valves C Park, H Cho, Y Lee, Y Kim International Journal of Refrigeration 30 (8), 1401-1407, 2007 | 126 | 2007 |
| Heating performance characteristics of a dual source heat pump using air and waste heat in electric vehicles JH Ahn, H Kang, HS Lee, HW Jung, C Baek, Y Kim Applied Energy 119, 1-9, 2014 | 125 | 2014 |
| The effects of air stoichiometry and air excess ratio on the transient response of a PEMFC under load change conditions B Kim, D Cha, Y Kim Applied Energy 138, 143-149, 2015 | 123 | 2015 |
| Thermal performance of direct two-phase refrigerant cooling for lithium-ion batteries in electric vehicles SH Hong, DS Jang, S Park, S Yun, Y Kim Applied Thermal Engineering 173, 115213, 2020 | 118 | 2020 |
| A generalized correlation for evaporation heat transfer of refrigerants in micro-fin tubes R Yun, Y Kim, K Seo, HY Kim International journal of heat and mass transfer 45 (10), 2003-2010, 2002 | 115 | 2002 |
| Flow boiling heat transfer of carbon dioxide in horizontal mini tubes R Yun, Y Kim, MS Kim International Journal of Heat and Fluid Flow 26 (5), 801-809, 2005 | 106 | 2005 |
