| Advances in interlaboratory testing and evaluation of bituminous materials: state-of-the-art report of the RILEM technical committee 206-ATB MN Partl, HU Bahia, F Canestrari, C De la Roche, H Di Benedetto, ... Springer Science & Business Media, 2012 | 144 | 2012 |
| Modelling of elastomeric bearings with application of Yeoh hyperelastic material model M Gajewski, R Szczerba, S Jemioło Procedia Engineering 111 (17), 220-227, 2015 | 60 | 2015 |
| Binder Testing: Chapter 2. In: Advances in interlaboratory testing and evaluation of bituminous materials, RILEM State of the Art Reports 9 D SYBILSKI, H Soenen, M GAJEWSKI, E Chailleux, W Bankowski Binder Testing: Chapter 2. In: Advances in interlaboratory testing and …, 2013 | 26* | 2013 |
| Selection of quiet pavement technology for Polish climate conditions on the example of CiDRO project KJ Kowalski, W Bańkowski, JB Król, M Gajewski, R Horodecka, ... Transportation Research Procedia 14, 2724-2733, 2016 | 23 | 2016 |
| Hyperelasto-plasticity S Jemioło, M Gajewski Warsaw University of Technology Publishing House, Warsaw, 2014 | 23* | 2014 |
| Prediction of asphalt concrete low-temperature cracking resistance on the basis of different constitutive models M Gajewski, PA Langlois Procedia Engineering 91, 81-86, 2014 | 22 | 2014 |
| Estimation of isotropic hyperelasticity constitutive models to approximate the atomistic simulation data for aluminium and tungsten monocrystals M Mazdziarz, M Gajewski Comput. Model. Eng. Sci 105 (2), 123-150, 2015 | 21 | 2015 |
| Buckling resistance of steel H-section beam–columns: In-plane buckling resistance MA Gizejowski, Z Stachura, RB Szczerba, MD Gajewski Journal of Constructional Steel Research 157, 347-358, 2019 | 18 | 2019 |
| Buckling resistance assessment of steel I-section beam-columns not susceptible to LT-buckling MA Giżejowski, R Szczerba, MD Gajewski, Z Stachura Archives of Civil and Mechanical Engineering 17, 205-221, 2017 | 18 | 2017 |
| Determination of failure modes in brick walls using cohesive elements approach Ł Kowalewski, M Gajewski Procedia Engineering 111, 454-461, 2015 | 18 | 2015 |
| Zastosowanie systemu optycznej korelacji obrazu „Aramis” do identyfikacji rys w elementach betonowych C Ajdukiewicz, M Gajewski, P Mossakowski Logistyka 6, 28-35, 2010 | 17 | 2010 |
| Application of a material fatigue damage model in 4PB tests AC Pronk, M Gajewski, W Bańkowski International Journal of Pavement Engineering 19 (9), 805-814, 2018 | 14 | 2018 |
| Numerical analysis of influence of intermediate stiffeners setting on the stability behaviour of thin-walled steel tank shell MJ Lewandowski, M Gajewski, M Gizejowski Thin-Walled Structures 90, 119-127, 2015 | 14 | 2015 |
| The influence of binder rheological properties on asphalt mixture permanent deformation M Gajewski, D Sybilski, W Bańkowski The Baltic Journal of Road and Bridge Engineering 10 (1), 54-60, 2015 | 13 | 2015 |
| ANALYSIS OF SELECTED MECHANICAL PROPERTIES OF MINERAL-CEMENT-EMULSION MIXTURES (MCE) 6) ANALIZA WYBRANYCH CECH MECHANICZNYCH MIESZANEK MINERALNO-CEMENTOWO-EMULSYJNYCH (MCE) 6 B Dołżycki, M Jaczewski, C Szydłowski, W Bańkowski, M Gajewski Roads and Bridges 22, 41-61, 2023 | 12 | 2023 |
| Evaluation of fatigue life of high modulus asphalt concrete with use of three different definitions M Gajewski, W Bańkowski, AC Pronk International Journal of Pavement Engineering 21 (14), 1717-1728, 2020 | 12 | 2020 |
| Beam-column resistance interaction criteria for in-plane bending and compression M Giżejowski, R Szczerba, M Gajewski, Z Stachura Procedia Engineering 111, 254-261, 2015 | 12 | 2015 |
| Estimation of post-cracking dissipation capabilities of fiber reinforced concretes in three point bending test monitored with application of digital image correlation system D Trinh-Duc, A Piotrowski, C Ajdukiewicz, P Woyciechowski, M Gajewski Materials 14 (17), 5088, 2021 | 11 | 2021 |
| Processing of four point bending test results for visco-elasticity and fatigue models AC Pronk, M Gajewski, W Bańkowski International Journal of Pavement Engineering 20 (10), 1226-1230, 2019 | 11 | 2019 |
| On the resistance evaluation of lateral-torsional buckling of bisymmetrical I-section beams using finite element simulations M Giżejowski, R Szczerba, M Gajewski, Z Stachura Procedia Engineering 153, 180-188, 2016 | 11 | 2016 |
Stanisław JemiołoProfessor of The Warsaw University of Technology在 il.pw.edu.pl 的电子邮件经过验证
