Multi-material additive manufacturing: A systematic review of design, properties, applications, challenges, and 3D printing of materials and cellular metamaterials A Nazir, O Gokcekaya, KMM Billah, O Ertugrul, J Jiang, J Sun, S Hussain Materials & Design 226, 111661, 2023 | 224 | 2023 |
Thermomechanical characterization of short carbon fiber and short glass fiber-reinforced ABS used in large format additive manufacturing KMM Billah, FAR Lorenzana, NL Martinez, RB Wicker, D Espalin Additive Manufacturing 35, 101299, 2020 | 94 | 2020 |
Reinforcement of material extrusion 3D printed polycarbonate using continuous carbon fiber MN Jahangir, KMM Billah, Y Lin, DA Roberson, RB Wicker, D Espalin Additive Manufacturing 28, 354-364, 2019 | 63 | 2019 |
Electrical and thermal characterization of 3D printed thermoplastic parts with embedded wires for high current-carrying applications KMM Billah, JL Coronel, MC Halbig, RB Wicker, D Espalin IEEE Access 7, 18799-18810, 2019 | 46 | 2019 |
Investigation on North American microgrid facility R Bayindir, E Hossain, E Kabalci, KMM Billah International Journal of Renewable Energy Research 5 (2), 558-574, 2015 | 45 | 2015 |
Internal arcing and lightning strike damage in short carbon fiber reinforced thermoplastic composites V Kumar, PS Yeole, N Hiremath, R Spencer, KMM Billah, U Vaidya, ... Composites Science and Technology 201, 108525, 2021 | 33 | 2021 |
Compressive deformation analysis of large area pellet-fed material extrusion 3D printed parts in relation to in situ thermal imaging EM Trejo, X Jimenez, KMM Billah, J Seppala, R Wicker, D Espalin Additive Manufacturing 33, 101099, 2020 | 31 | 2020 |
Selective laser sintering of high-temperature thermoset polymer MS Hassan, KMM Billah, SE Hall, S Sepulveda, JE Regis, C Marquez, ... Journal of Composites Science 6 (2), 41, 2022 | 28 | 2022 |
Low‐temperature selective laser sintering 3D printing of PEEK‐Nylon blends: Impact of thermal post‐processing on mechanical properties and thermal stability LA Chavez, P Ibave, MS Hassan, SE Hall‐Sanchez, KMM Billah, A Leyva, ... Journal of Applied Polymer Science 139 (23), 52290, 2022 | 20 | 2022 |
Thermal analysis of thermoplastic materials filled with chopped fiber for large area 3d printing KMM Billah, FAR Lorenzana, NL Martinez, S Chacon, RB Wicker, ... University of Texas at Austin, 2019 | 19 | 2019 |
Large-scale additive manufacturing of self-heating molds KMM Billah, J Heineman, P Mhatre, A Roschli, B Post, V Kumar, S Kim, ... Additive Manufacturing 47, 102282, 2021 | 17 | 2021 |
Additive manufacturing of multimaterial and multifunctional structures via ultrasonic embedding of continuous carbon fiber KMM Billah, JL Coronel Jr, L Chavez, Y Lin, D Espalin Composites Part C: Open Access 5, 100149, 2021 | 11 | 2021 |
Thermomechanical characterization of short carbon fiber and short glass fiber-reinforced ABS used in large format additive manufacturing, Addit. Manuf. 35 (2020) 101299 KMM Billah, FAR Lorenzana, NL Martinez, RB Wicker, D Espalin | 6 | 2020 |
Hybrid Manufacturing with FDM Technology for Enabling Power Electronics Component Fabrication JL Coronel Jr, KMM Billah, CFA Carrasco, SA Barraza, RB Wicker, ... Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference …, 2018 | 4 | 2018 |
Thermal Analysis of Large Area Additive Manufacturing Resistance Heating Composites for Out of Oven/Autoclave Applications KMM Billah, AA Hassen, A Nasirov, V Kunc, S Kim ASME IMECE 2020, 2020 | 3 | 2020 |
A 1U cube-satellite for electrically conductive 3D printing in GTO M Everett, A Flores-Abad, A Khan, K Masum Billah, E Herzog, A Rahman, ... 2018 AIAA SPACE and Astronautics Forum and Exposition, 5231, 2018 | 2 | 2018 |
Selective laser sintering of high temperature thermoset MS Hassan, KMM Billah, SE Hall, S Sepulveda, J Regis, C Marquez, ... Behavior and Mechanics of Multifunctional Materials XVI 12044, 64-84, 2022 | 1 | 2022 |
Joining technique for in-oven/autoclave molds manufactured by large scale polymer additive manufacturing AA Hassen, E Betters, N Tsiamis, J West, T Smith, KMM Billah, D Nuttall, ... Manufacturing Letters 32, 77-82, 2022 | 1 | 2022 |
Orbital Factory II: a 3D Printer CubeSat with Self-repairing Purposes M Everett, A Flores-Abad, KMM Billah, A Khan, A Choudhuri 32nd Annual AIAA/USU Conference on Small Satellites, 2018 | 1 | 2018 |
Characterization Of Electrically Conductive Inks In Simulated Space Environment KMM Billah | 1 | 2017 |