Crystalline hydroxyapatite coatings synthesized under hydrothermal conditions on modified titanium substrates K Suchanek, A Bartkowiak, A Gdowik, M Perzanowski, S Kąc, B Szaraniec, ... Materials Science and Engineering: C 51, 57-63, 2015 | 95 | 2015 |
SEM and TEM microstructural investigation of high-speed tool steel after laser melting S Kąc, J Kusiński Materials Chemistry and Physics 81 (2-3), 510-512, 2003 | 88 | 2003 |
The influence of high temperature annealing and creep on the microstructure and chemical element distribution in the γ, γ′ and TCP phases in single crystal Ni-base superalloy B Dubiel, P Indyka, I Kalemba-Rec, A Kruk, T Moskalewicz, ... Journal of Alloys and Compounds 731, 693-703, 2018 | 37 | 2018 |
Effect of Co deposition on oxidation behavior and electrical properties of ferritic steel for solid oxide fuel cell interconnects A Kruk, A Adamczyk, A Gil, S Kąc, J Dąbek, M Ziąbka, T Brylewski Thin Solid Films 590, 184-192, 2015 | 30 | 2015 |
Microstructure and properties of the in situ formed amorphous-crystalline composites in the Fe–Cu-based immiscible alloys T Kozieł, A Zielińska-Lipiec, J Latuch, S Kąc Journal of Alloys and Compounds 509 (14), 4891-4895, 2011 | 19 | 2011 |
Properties and microstructure of the (Fe, Ni)–Cu–(P, Si, B) melt‐spun alloys K Ziewiec, K Bryła, A Błachowski, K Ruebenbauer, K Prusik, S Kąc, ... Journal of microscopy 237 (3), 232-236, 2010 | 16 | 2010 |
Formation, properties and microstructure of amorphous/crystalline composite Ag20Cu30Ti50 alloy using miscibility gap K Ziewiec, Z Kędzierski, A Zielińska-Lipiec, J Stępiński, S Kąc Journal of alloys and compounds 482 (1-2), 114-117, 2009 | 16 | 2009 |
Structure and properties change In case of laser remelting of surface layers and coatings J Kusiński, J Przybyłowicz, S Kąc, A Woldan Metallurgist 66, 276-285, 1999 | 16 | 1999 |
Influence of high-temperature annealing on morphological and compositional changes of phases in Ni-base single crystal superalloy B Dubiel, I Kalemba-Rec, A Kruk, T Moskalewicz, P Indyka, S Kąc, ... Materials Characterization 131, 266-276, 2017 | 15 | 2017 |
Microstructural characterization of SiO2/Ni nanocomposites electrodeposited from a sulphate bath modified by PEI T Ratajski, I Kalemba-Rec, P Indyka, S Kąc, M Kot, B Dubiel Materials Characterization 142, 478-491, 2018 | 11 | 2018 |
Structure and thermal stability of Bi3NbO7 thin films grown by pulsed laser deposition G Szwachta, S Kąc, T Moskalewicz Surface and Coatings Technology 302, 474-481, 2016 | 10 | 2016 |
Stress‐Strain Analysis in TiN Nanocoating Deposited on Polymer with respect to Au Nanointerlayer M Kopernik, A Milenin, S Kąc, M Wróbel Journal of Nanomaterials 2014 (1), 813587, 2014 | 9 | 2014 |
Glass forming ability and thermal stability of Ni63Cu9Fe8P20 melt spun ribbon K Ziewiec, P Olszewski, R Gajerski, S Kąc, A Ziewiec, Z Ke Journal of Non-Crystalline Solids 343 (1-3), 150-153, 2004 | 9 | 2004 |
Deposition of oxide and intermetallic thin films by pulsed laser (PLD) and electron beam (PED) methods J Kusiński, A Kopia, Ł Cieniek, S Kąc, A Radziszewska Archives of Metallurgy and Materials 60 (3), 2173-2182, 2015 | 8 | 2015 |
Structure of melt-spun Fe–Cu–Si–B–Nb alloy T Kozieł, J Latuch, S Kąc Journal of alloys and compounds 586, S121-S125, 2014 | 7 | 2014 |
The microstructure and properties of the bainitic cast steel for scissors crossovers J Pacyna, P Bała, S Dobosz, A Kokosza, S Kąc Journal of Achievements in Materials and Manufacturing Engineering 39 (1), 19-26, 2010 | 7 | 2010 |
Badania stanu powłoki AL-SI na stalowych taśmach i rurach przeznaczonych na elementy układów wydechowych, poddanej działaniu temperatury 150° C i czasu K Żaba, S Nowak, S Kąc Rudy i Metale Nieżelazne 52 (7), 410-418, 2007 | 7 | 2007 |
The AlMg thin films deposited by using PLD technique A Radziszewska, S Kąc, M Kąc Inżynieria Materiałowa 28 (3-4), 720-723, 2007 | 6 | 2007 |
Research on temperature time and atmospheric impact on Al-Si coat of low-carbon steel strips K Żaba, S Nowak, S Kąc, M Wróbel International Conference: Problems of modern techniques in aspect of …, 2006 | 6 | 2006 |
Wpływ laserowego stopowania stali węglowej chromem na strukturę i własności warstwy wierzchniej. A Woldan, J Kusiński, E Tasak, S Kąc Inżynieria Materiałowa 21 (6), 478-481, 2000 | 6 | 2000 |