Critical ausforming temperature to promote isothermal bainitic transformation in prior-deformed austenite H Hu, G Xu, F Dai, J Tian, G Chen Materials Science and Technology 35 (4), 420-428, 2019 | 23 | 2019 |
Effect of austenisation temperature on bainite transformation below martensite starting temperature J Tian, G Xu, Z Jiang, Q Yuan, G Chen, H Hu Materials Science and Technology, 2019 | 21 | 2019 |
Non-cube-on-cube orientation relationship between M23C6 and austenite in an austenitic stainless steel G Chen, R Rahimi, M Harwarth, M Motylenko, G Xu, H Biermann, J Mola Scripta Materialia 213, 114597, 2022 | 20 | 2022 |
Optimizing microstructure and property by ausforming in a medium-carbon bainitic steel G Chen, H Hu, G Xu, J Tian, X Wan, X Wang ISIJ International 60 (9), 2007-2014, 2020 | 17 | 2020 |
Effect of strain rate on the bainitic transformation in Fe-C-Mn-Si medium-carbon bainitic steels G Chen, G Xu, HS Zurob, H Hu, X Wan Metallurgical and Materials Transactions A 50, 573-580, 2019 | 17 | 2019 |
Impact of Al addition on deformation behavior of Fe–Cr–Ni–Mn–C austenitic stainless steel G Chen, R Rahimi, G Xu, H Biermann, J Mola Materials Science and Engineering: A 797, 140084, 2020 | 16 | 2020 |
On the effect of Mn-content on the strength-ductility balance in Ni-free high N transformation induced plasticity steels M Khorrami, AZ Hanzaki, HR Abedi, M Moallemi, J Mola, G Chen Materials Science and Engineering: A 814, 141260, 2021 | 14 | 2021 |
Effects of stress on martensite transformation during continuous cooling and mechanical response of a medium-carbon high-strength steel M Liu, G Xu, G Chen, J Jia, Z Chen, Z Xiong Metallurgical and Materials Transactions A 51, 597-607, 2020 | 12 | 2020 |
Aluminum-alloyed lightweight stainless steels strengthened by B2-(Ni, Fe) Al precipitates M Harwarth, G Chen, R Rahimi, H Biermann, A Zargaran, M Duffy, ... Materials & Design 206, 109813, 2021 | 11 | 2021 |
Comprehensive analysis of the effect of ausforming on the martensite start temperature in a Fe-C-Mn-Si medium-carbon high-strength bainite steel J Tian, G Chen, Y Xu, Z Jiang, G Xu Metallurgical and Materials Transactions A 50, 4541-4549, 2019 | 11 | 2019 |
Temperature dependence of tensile deformation behavior and strain hardening of lean duplex stainless steels M Khorrami, AZ Hanzaki, HR Abedi, J Mola, G Chen, P Minarik Journal of Materials Research and Technology 20, 330-342, 2022 | 9 | 2022 |
Microstructure, texture, and mechanical properties of asymmetrically cold-rolled Ni1. 5FeCrCu0. 5 high-entropy alloy S Taali, P Moazzen, MR Toroghinejad, G Chen, J Mola Journal of Materials Research and Technology 21, 3489-3501, 2022 | 7 | 2022 |
Fracture evolution in ferrite/martensite dual-phase flange steel W Liang, Q Yuan, G Chen, M Liu, W Qiao Ironmaking & Steelmaking 48 (1), 88-96, 2021 | 7 | 2021 |
Effect of Strain Rate on Deformation Resistance during Ausforming in Fe–C–Mn–Si High‐Strength Bainite Steels G Chen, G Xu, H Hu, Q Yuan, Q Zhang steel research international 89 (11), 1800201, 2018 | 6 | 2018 |
Microstructure and mechanical properties of Co-added and Al-added austenitic stainless steels G Chen, G Xu, H Biermann, J Mola Materials Science and Engineering: A 854, 143832, 2022 | 5 | 2022 |
Investigation on the oxidation behavior of dual-phase silicon-containing steel at different beginning oxidation temperatures M Liu, Q Yuan, J Tian, G Chen, W Qiao, G Xu Arabian Journal for Science and Engineering 45, 9015-9022, 2020 | 4 | 2020 |
Effect of two-step ausforming on bainite transformation and retained austenite in a medium-carbon bainitic steel G Chen, G Xu, H Hu, J Tian, Q Yuan, J Wang Materials Research Express 7 (1), 016519, 2020 | 4 | 2020 |
Microstructural Constituents and Mechanical Properties of Low-Density Fe-Cr-Ni-Mn-Al-C Stainless Steels S Scherbring, G Chen, B Veltel, G Bartzsch, J Richter, M Vollmer, ... Materials 15 (15), 5121, 2022 | 3 | 2022 |
贝氏体钢等温淬火和淬火-配分复合工艺 刘曼, 胡海江, 田俊羽, 陈光辉, 徐光 钢铁 56 (1), 69-74, 2021 | 2 | 2021 |
高温变形和过冷度对中碳钢贝氏体相变的影响 陈光辉, 徐耀文, 刘曼, 陈振业, 徐光 钢铁研究学报 32 (11), 984-989, 2020 | 2 | 2020 |