| The Impact of Metal Additive Manufacturing on the Aerospace Industry S Mohd Yusuf, S Cutler, N Gao Metals 9 (12), 1286, 2019 | 244 | 2019 |
| Investigation on porosity and microhardness of 316L stainless steel fabricated by selective laser melting S Mohd Yusuf, Y Chen, R Boardman, S Yang, N Gao Metals 7 (2), 64, 2017 | 192 | 2017 |
| Influence of energy density on metallurgy and properties in metal additive manufacturing S Mohd Yusuf, N Gao Materials Science and Technology 33 (11), 1269-1289, 2017 | 173 | 2017 |
| Microstructure and corrosion performance of 316L stainless steel fabricated by Selective Laser Melting and processed through high-pressure torsion S Mohd Yusuf, M Nie, Y Chen, S Yang, N Gao Journal of Alloys and Compounds 763, 360-375, 2018 | 102 | 2018 |
| Microstructural evolution and strengthening of selective laser melted 316L stainless steel processed by high-pressure torsion S Mohd Yusuf, Y Chen, S Yang, N Gao Materials Characterization, 110012, 2019 | 59 | 2019 |
| Interfacial characterisation of multi-material 316L stainless steel/Inconel 718 fabricated by laser powder bed fusion SM Yusuf, X Zhao, S Yang, N Gao Materials Letters 284, 128928, 2021 | 41 | 2021 |
| Effect of sample orientation on the microstructure and microhardness of additively manufactured AlSi10Mg processed by high-pressure torsion S Mohd Yusuf, M Hoegden, N Gao International Journal of Advanced Manufacturing Technology, 1-32, 2019 | 40 | 2019 |
| Enhanced Interfacial Adhesion and Osseointegration of Anodic TiO 2 Nanotube Arrays on Ultra-Fine-Grained Titanium and Underlying Mechanisms N Hu, Y Wu, L Xie, S Mohd Yusuf, N Gao, MJ Starink, L Tong, PK Chu, ... Acta Biomaterialia, 2019 | 34 | 2019 |
| Comparison between Virgin and Recycled 316L SS and AlSi10Mg Powders Used for Laser Powder Bed Fusion Additive Manufacturing S Mohd Yusuf, E Choo, N Gao Metals 10 (12), 1625, 2020 | 32 | 2020 |
| Tribological behaviour of 316L stainless steel additively manufactured by laser powder bed fusion and processed via high-pressure torsion SM Yusuf, D Lim, Y Chen, S Yang, N Gao Journal of Materials Processing Technology 290, 116985, 2021 | 14 | 2021 |
| Micromechanical Response of Additively Manufactured 316L Stainless Steel Processed by High‐Pressure Torsion S Mohd Yusuf, Y Chen, S Yang, N Gao Advanced Engineering Materials 22 (10), 2000052, 2020 | 8 | 2020 |
| Microstructures and Hardening Mechanisms of a 316L Stainless Steel/Inconel 718 Interface Additively Manufactured by Multi-Material Selective Laser Melting S Mohd Yusuf, N Mazlan, NH Musa, X Zhao, Y Chen, S Yang, NA Nordin, ... Metals 13 (2), 400, 2023 | 7* | 2023 |
| Effect of magnetorheological grease’s viscosity to the torque performance in magnetorheological brake KA Abdul Kadir, N Nazmi, N Mohamad, MK Shabdin, D Adiputra, ... Materials 15 (16), 5717, 2022 | 7 | 2022 |
| Magnetostriction Enhancement in Midrange Modulus Magnetorheological Elastomers for Sensor Applications MA Tasin, SAA Aziz, SA Mazlan, MAF Johari, NA Nordin, SYM Yusuf, ... Micromachines 14 (4), 767, 2023 | 4 | 2023 |
| Influence of High-Pressure Torsion on the Microstructure and Microhardness of Additively Manufactured 316L Stainless Steel S Mohd Yusuf, Y Chen, N Gao Metals 11 (10), 1553, 2021 | 4 | 2021 |
| Additive Manufacturing of Polymer–Fiber Composites RA Ilyas, AS El-Shafay, MT Mastura, SM Yusuf, E Bayraktar, AH Azman Materials 15 (15), 5337, 2022 | 3 | 2022 |
| Elimination of porosity in additively manufactured 316L stainless steel by high-pressure torsion S Mohd Yusuf, Y Chen, NH Musa, N Mazlan, NA Nordin, N Nazmi, ... The International Journal of Advanced Manufacturing Technology 123 (3), 1175 …, 2022 | 2 | 2022 |
| Simulation of a Pre-structure Device for Fountain-like Magnetorheological Elastomer via Finite Element Magnetic Method (FEMM) MAM Fakhree, NA Nordin, N Nazmi, SA Mazlan, SAA Aziz, SYM Yusuf Journal of Advanced Vehicle System, 1-7, 2021 | 2 | 2021 |
| An insight into amorphous shear band in magnetorheological solid by atomic force microscope MAF Johari, AM Sarman, SA Mazlan, U U, NA Nordin, SA Abdul Aziz, ... Materials 14 (16), 4384, 2021 | 2 | 2021 |
| Enhancing the Tribological Performance of Additively Manufactured Aluminium Alloy ER 5356 via the Cold Deformation Process MFAM Azlin, AB Abdullah, SYM Yusuf, ZK Wani, R Rajendran Journal of Advanced Research in Applied Mechanics 113 (1), 189-206, 2024 | 1 | 2024 |
Dr Nong GaoUniversity of Southampton在 soton.ac.uk 的电子邮件经过验证
