关注
Mariusz Walczak
Mariusz Walczak
在 pollub.pl 的电子邮件经过验证
标题
引用次数
引用次数
年份
Microstructure and corrosion behaviour of aluminum fly ash composites
J Bienia, M Walczak, B Surowska, J Sobczaka
Journal of optoelectronics and advanced materials 5 (2), 493-502, 2003
1922003
The influence of SiO2 and SiO2–TiO2 intermediate coatings on bond strength of titanium and Ti6Al4V alloy to dental porcelain
J Bieniaś, B Surowska, A Stoch, H Matraszek, M Walczak
Dental Materials 25 (9), 1128-1135, 2009
1002009
The tribological characteristics of SiC particle reinforced aluminium composites
M Walczak, D Pieniak, M Zwierzchowski
Archives of civil and mechanical engineering 15 (1), 116-123, 2015
932015
Cavitation erosion and sliding wear mechanisms of AlTiN and TiAlN films deposited on stainless steel substrate
M Szala, M Walczak, K Pasierbiewicz, M Kamiński
Coatings 9 (5), 340, 2019
772019
Effect of shot peening on the surface properties, corrosion and wear performance of 17-4PH steel produced by DMLS additive manufacturing
M Walczak, M Szala
Archives of Civil and Mechanical Engineering 21 (4), 157, 2021
722021
Comparative Study on the Cavitation Erosion and Sliding Wear of Cold-Sprayed Al/Al2O3 and Cu/Al2O3 Coatings, and Stainless Steel, Aluminium Alloy, Copper …
M Szala, L Łatka, M Walczak, M Winnicki
Metals 10 (7), 856, 2020
722020
Microstructure and mechanical properties of ceramic coatings on Ti and Ti-based alloy
B Surowska, J Bieniaś, M Walczak, K Sangwal, A Stoch
Applied Surface Science 238 (1-4), 288-294, 2004
582004
Investigations of cavitation erosion and wear resistance of cermet coatings manufactured by HVOF spraying
E Jonda, M Szala, M Sroka, L Łatka, M Walczak
Applied Surface Science 608, 155071, 2023
562023
Effects of ceramic-based CrN, TiN, and AlCrN interlayers on wear and friction behaviors of AlTiSiN+ TiSiN PVD coatings
D Özkan, MA Yılmaz, M Szala, C Türküz, D Chocyk, C Tunç, O Göz, ...
Ceramics International 47 (14), 20077-20089, 2021
522021
Hardness and wear resistance of dental biomedical nanomaterials in a humid environment with non-stationary temperatures
D Pieniak, A Walczak, M Walczak, K Przystupa, AM Niewczas
Materials 13 (5), 1255, 2020
482020
Effect of shot peening on the mechanical properties and cytotoxicity behaviour of titanium implants produced by 3D printing technology
R Żebrowski, M Walczak, A Korga, M Iwan, M Szala
Journal of Healthcare Engineering 2019 (1), 8169538, 2019
452019
Influence of 13 wt% TiO2 content in alumina-titania powders on microstructure, sliding wear and cavitation erosion resistance of APS sprayed coatings
L Łatka, M Michalak, M Szala, M Walczak, P Sokołowski, A Ambroziak
Surface and Coatings Technology 410, 126979, 2021
432021
Effect of Atmospheric Plasma Sprayed TiO2-10% NiAl Cermet Coating Thickness on Cavitation Erosion, Sliding and Abrasive Wear Resistance.
M Szala, A Dudek, A Maruszczyk, M Walczak, J Chmiel, M Kowal
Acta Physica Polonica, A. 136 (2), 2019
342019
Investigation into microstructure and mechanical properties effects on sliding wear and cavitation erosion of Al2O3–TiO2 coatings sprayed by APS, SPS and S-HVOF
M Nowakowska, L Łatka, P Sokołowski, M Szala, FL Toma, M Walczak
Wear 508, 204462, 2022
332022
Adhesion and Mechanical Properties of TiAlN and AlTiN Magnetron Sputtered Coatings Deposited on the DMSL Titanium Alloy Substrate.
M Walczak, K Pasierbiewicz, M Szala
Acta Physica Polonica, A. 136 (2), 2019
332019
Wear Behavior Analysis of Al2O3 Coatings Manufactured by APS and HVOF Spraying Processes Using Powder and Suspension Feedstocks
M Michalak, P Sokołowski, M Szala, M Walczak, L Łatka, FL Toma, ...
Coatings 11 (8), 879, 2021
292021
Effect of microstructure and hardness on cavitation erosion and dry sliding wear of HVOF deposited CoNiCrAlY, NiCoCrAlY and NiCrMoNbTa coatings
M Szala, M Walczak, A Świetlicki
Materials 15 (1), 93, 2021
282021
A study on the corrosion of stainless steel floor drains in an indoor swimming pool
M Szala, K Beer-Lech, M Walczak
Engineering Failure Analysis 77, 31-38, 2017
282017
Cavitation erosion and sliding wear of MCrAlY and NiCrMo coatings deposited by HVOF thermal spraying
M Szala, M Walczak, L Łatka, K Gancarczyk, D Özkan
Advances in Materials Science 20 (2), 26-38, 2020
272020
Effects of shot peening and cavitation peening on properties of surface layer of metallic materials—a short review
A Świetlicki, M Szala, M Walczak
Materials 15 (7), 2476, 2022
262022
系统目前无法执行此操作,请稍后再试。
文章 1–20