| Synthesis and properties of magnetic multi-walled carbon nanotubes loaded with Fe4N nanoparticles Y Hu, R Jiang, J Zhang, C Zhang, G Cui Journal of Materials Science & Technology 34 (5), 886-890, 2018 | 22 | 2018 |
| Growing recyclable and healable piezoelectric composites in 3D printed bioinspired structure for protective wearable sensor Q He, Y Zeng, L Jiang, Z Wang, G Lu, H Kang, P Li, B Bethers, S Feng, ... Nature Communications 14 (1), 6477, 2023 | 18 | 2023 |
| Preparation and properties of high strength Fe–Ni–P ternary alloys W Chai, RM German, EA Olevsky, X Wei, R Jiang, G Cui Advanced Engineering Materials 18 (11), 1889-1896, 2016 | 12 | 2016 |
| Effects of Cu on Microstructures, Mechanical, and Magnetic Properties of Fe–Ni–P Alloys Fabricated by Liquid Phase Sintering R Jiang, Y Hu, G Cui, C Zhang, A Li Advanced Engineering Materials 20 (1), 1700404, 2018 | 5 | 2018 |
| Influence of Ni-P content on microstructure and mechanical properties of Fe-x (Ni+ P)-1Cu alloys R Jiang, A Li, G Cui, C Zhang, H Chen, Y Wang Materials Science and Engineering: A 707, 1-11, 2017 | 4 | 2017 |
| Proportional Integral Derivative Control in Spark Plasma Sintering Simulations R Jiang, E Torresani, G Cui, EA Olevsky Materials 14 (7), 1779, 2021 | 3 | 2021 |
| Comparison of Microstructure and Mechanical Properties of Sintered γ-(Fe-Ni-P) Alloys with Abundant P Doping R Jiang, A Li, G Cui, C Zhang Metallurgical and Materials Transactions A 50, 2580-2584, 2019 | 3 | 2019 |
| Surface Martensite Strengthening of Ultra‐fine Porous Iron G Cui, R Jiang, A Li, C Zhang, J Chen steel research international 89 (3), 1700357, 2018 | 3 | 2018 |
| Localized engineering of grain boundary morphology by electro-nano-pulsing processing W Xu, R Jiang, M Xu, MS Hasan, K Polifrone, J Gu, Y Yang, E Torresani, ... Materials Today Advances 20, 100442, 2023 | 2 | 2023 |
| Quasi-instantaneous materials processing technology via high-intensity electrical nano pulsing EA Olevsky, R Jiang, W Xu, A Maximenko, T Grippi, E Torresani Scientific Reports 14 (1), 434, 2024 | 1 | 2024 |
| Evading strength-plasticity conflict in microstructure-optimized Fe-Cu-Ni-P sintered alloy via layered-composite powder R Jiang, G Cui, EA Olevsky, C Zhang, D Chen Materialia 14, 100903, 2020 | 1 | 2020 |
| Enhanced Mechanical Properties of Sintered Iron via Cyclic Induction Heat Treatment Y Chen, R Jiang, C Zhang, D Chen, G Cui Russian Journal of Physical Chemistry A 94, 2696-2702, 2020 | 1 | 2020 |
| Low-Temperature Induced Martensitic Transformation Enhancing Mechanical Properties of Metastable Fe-Ni-P Alloy G Cui, R Jiang, C Zhang, Y Liu Metals 9 (7), 785, 2019 | 1 | 2019 |
| Study on microstructure and properties of 20MnMoNb steel by gas oxynitriding J Xu, R Jiang, C Zhang, G Cui Journal of Failure Analysis and Prevention 17, 154-158, 2017 | 1 | 2017 |
| Robust image-based cross-sectional grain boundary detection and characterization using machine learning N Satterlee, R Jiang, E Olevsky, E Torresani, X Zuo, JS Kang Journal of Intelligent Manufacturing, 1-29, 2024 | | 2024 |
| Cyclic Phase Transition-Assisted Spark Plasma Sintering of AlCoCrFeNi Complex Concentrated Alloys R Jiang, E Torresani, A Maximenko, H Wang, S Faulhaber, K Vecchio, ... Metallurgical and Materials Transactions A 55 (4), 1111-1121, 2024 | | 2024 |
| Preparation and properties of CNT reinforced Fe–Ni–P composites fabricated by liquid phase sintering L Mao, G Cui, R Jiang, Q Wang, C Zhang, R Wei, S Wang Modern Physics Letters B 32 (20), 1850226, 2018 | | 2018 |
| High-Density Dislocation Formation by Ultra-Intense Nanopulsing Electric Current W Xu, R Jiang, M Xu, S Hasan, C Delaney, C Foronda, Y Yang, ... Available at SSRN 4934785, 0 | | |
