| Laser Boron-ising of Ti-6Al-4V as a result of Laser Alloying with pre-placed BN J.Senthil Selvan, K.S. Manian, A.K.Nath, H. Kumar, C.Ramachandra, S.P ... Mat. Sci. & Eng.A 260, 178-187, 1999 | 111 | 1999 |
| Silicide Precipitation in Alloy Ti-6AI-5Zr-0.5 Mo-0.25 Si C Ramachandra, V Singh Metallurgical Transactions A 13, 771-775, 1982 | 89 | 1982 |
| Microstructural characterisation of near-α titanium alloy Ti-6Al-4Sn-4Zr-0.70Nb-0.50Mo-0.40Si C Ramachandra, AK Singh, GMK Sarma Metallurgical and Materials Transactions A 24, 1273-1280, 1993 | 85 | 1993 |
| Characterization of silicides in high-temperature titanium alloys AK Singh, C Ramachandra Journal of materials science 32, 229-234, 1997 | 73 | 1997 |
| Effect of silicide precipitation on tensile properties and fracture of alloy Ti-6Al-5Zr-0.5 Mo-0.25 Si C Ramachandra, V Singh Metallurgical Transactions A 16, 227-231, 1985 | 54 | 1985 |
| Durability of TBCs with a surface environmental barrier layer under thermal cycling in air and in molten salt C Ramachandra, KN Lee, SN Tewari Surface and Coatings Technology 172 (2-3), 150-157, 2003 | 50 | 2003 |
| Role of work hardening characteristics of matrix alloys in the strengthening of metal matrix composites KT Kashyap, C Ramachandra, C Dutta, B Chatterji Bulletin of Materials Science 23, 47-49, 2000 | 43 | 2000 |
| Microstructural stability on aging of an α+ β titanium alloy: ti-6ai-1.6 zr-3.3 mo-0.30 si AK Singh, T Roy, C Ramachandra Metallurgical and Materials Transactions A 27, 1167-1173, 1996 | 41 | 1996 |
| Sllicide phases in some complex titanium alloys C Ramachandra, V Singh Metallurgical Transactions A 23, 689-690, 1992 | 35 | 1992 |
| Low cycle fatigue behaviour of titanium alloy 685 C Ramachandra, VK Verma, V Singh International journal of fatigue 10 (1), 21-26, 1988 | 31 | 1988 |
| Precipitation of the ordered Ti3Al phase in alloy Ti 6.3 Al 2Zr 3.3 Mo O. 3OSi C Ramachandra, V Singh Scripta metallurgica 20 (4), 509-512, 1986 | 30 | 1986 |
| Modeling of droplet dynamic and thermal behavior during spray deposition CR N. S. Mahesh, J. Mendonca, M. K. Muralidhara, B. K. Muralidhara Bull. Mater. Sci 26 (3), 355-364, 2003 | 27 | 2003 |
| Microstructure and wear characteristics of an Al–4Cu–20Pb alloy produced by spray deposition B Tripathi, M Kumar, C Ramachandra Materials Transactions, JIM 33 (5), 519-524, 1992 | 26 | 1992 |
| Microstructural characterization and creep behaviour of as-cast titanium aluminide Ti–48Al–2V M Sujata, DH Sastry, C Ramachandra Intermetallics 12 (7-9), 691-697, 2004 | 24 | 2004 |
| Role of diffusional coherency strain theory in the discontinuous precipitation in Mg-Al alloy KT Kashyap, C Ramachandra, M Sujatha, B Chatterji Bulletin of Materials Science 23, 39-45, 2000 | 24 | 2000 |
| Structure of martensite in titanium alloy Ti-6Al-1.6 Zr-3.3 Mo-0.3 Si AK Singh, C Ramachandra, M Tavafoghi, V Singh Journal of materials science letters 12, 697-699, 1993 | 21 | 1993 |
| Effect of silicides on tensile properties and fracture of alloy Ti-6AI-5Zr-0.5 Mo-0.25 Si from 300 to 823 K C Ramachandra, V Singh Journal of materials science 23, 835-841, 1988 | 19 | 1988 |
| Effect of silicide precipitation on the low cycle fatigue behaviour of alloy Ti 6Al 5Zr 0.5 Mo 0.25 Si C Ramachandra, V Singh Scripta metallurgica 21 (5), 633-636, 1987 | 19 | 1987 |
| Orientation relationship between α′ titanium and sulicide S02 in alloy Ti-6Al-5Zr-0.5Mo-0.25Si C Ramachandra, V Singh Metallurgical Transactions A 16, 453-455, 1985 | 19 | 1985 |
| Microstructure and wear characteristics of a Hypereutectic Al-Si alloy produced by Spray Deposition SNO V.C.Srivastava, R.K. Mondal, C.Ramachandra, B.Chatterji Trans. Indian. Inst. Met. 52 (1), 29-40, 1999 | 17 | 1999 |
