| Lasers in additive manufacturing: A review H Lee, CHJ Lim, MJ Low, N Tham, VM Murukeshan, YJ Kim International Journal of Precision Engineering and Manufacturing-Green …, 2017 | 527 | 2017 |
| Selective compositional range exclusion via directed energy deposition to produce a defect-free Inconel 718/SS 316L functionally graded material SH Kim, H Lee, SM Yeon, C Aranas Jr, K Choi, J Yoon, SW Yang, H Lee Additive Manufacturing 47, 102288, 2021 | 74 | 2021 |
| Fully laser-patterned stretchable microsupercapacitors integrated with soft electronic circuit components S Park, H Lee, YJ Kim, PS Lee NPG Asia Materials 10 (10), 959-969, 2018 | 72 | 2018 |
| Defect of functionally graded material of inconel 718 and STS 316L fabricated by directed energy deposition and its effect on mechanical properties SW Yang, J Yoon, H Lee, DS Shim Journal of Materials Research and Technology 17, 478-497, 2022 | 49 | 2022 |
| Additive manufacturing of a shift block via laser powder bed fusion: The simultaneous utilisation of optimised topology and a lattice structure SH Kim, SM Yeon, JH Lee, YW Kim, H Lee, J Park, NK Lee, JP Choi, ... Virtual and physical prototyping 15 (4), 460-480, 2020 | 40 | 2020 |
| Polarization insensitive graphene saturable absorbers using etched fiber for highly stable ultrafast fiber lasers H Lee, WS Kwon, JH Kim, D Kang, S Kim Optics Express 23 (17), 22116-22122, 2015 | 37 | 2015 |
| Ultrashort stretched-pulse L-band laser using carbon-nanotube saturable absorber WS Kwon, H Lee, JH Kim, J Choi, KS Kim, S Kim Optics express 23 (6), 7779-7785, 2015 | 34 | 2015 |
| Laser-induced reduced-graphene-oxide micro-optics patterned by femtosecond laser direct writing MJ Low, H Lee, CHJ Lim, CSS Sandeep, VM Murukeshan, SW Kim, ... Applied Surface Science 526, 146647, 2020 | 32 | 2020 |
| Nonlinear third harmonic generation at crystalline sapphires G Yi, H Lee, J Jiannan, BJ Chun, S Han, H Kim, YW Kim, D Kim, SW Kim, ... Optics express 25 (21), 26002-26010, 2017 | 26 | 2017 |
| Deep learning for in-situ powder stream fault detection in directed energy deposition process H Lee, W Heogh, J Yang, J Yoon, J Park, S Ji, H Lee Journal of Manufacturing Systems 62, 575-587, 2022 | 23 | 2022 |
| Transferable ultra-thin multi-level micro-optics patterned by tunable photoreduction and photoablation for hybrid optics H Lee, MJ Low, CHJ Lim, J An, CSS Sandeep, TM Rohith, HG Rhee, ... Carbon 149, 572-581, 2019 | 21 | 2019 |
| 3D Printing of a miniature turbine blade model with an embedded fibre Bragg grating sensor for high-temperature monitoring SI Kim, HY Jung, S Yang, J Yoon, H Lee, WH Ryu Virtual and Physical Prototyping 17 (2), 156-169, 2022 | 18 | 2022 |
| Effects of pre-and post-repair heat treatments on microstructure and tensile behaviors of 630 stainless steel repaired by metal additive manufacturing DS Shim, H Lee, Y Son, WJ Oh Journal of Materials Research and Technology 13, 980-999, 2021 | 18 | 2021 |
| Attachable micropseudocapacitors using highly swollen laser-induced-graphene electrodes YA Lee, J Lim, Y Cho, H Lee, S Park, GW Lee, CY Yoo, SH Park, ... Chemical Engineering Journal 386, 123972, 2020 | 18 | 2020 |
| Effects of deposition strategy and preheating temperature on thermo-mechanical characteristics of Inconel 718 super-alloy deposited on AISI 1045 substrate using a DED process H Kim, KK Lee, DG Ahn, H Lee Materials 14 (7), 1794, 2021 | 13 | 2021 |
| Surface third and fifth harmonic generation at crystalline Si for non-invasive inspection of Si wafer’s inter-layer defects Y Gao, H Lee, J Jiao, BJ Chun, S Kim, DH Kim, YJ Kim Optics Express 26 (25), 32812-32823, 2018 | 12 | 2018 |
| Thermo-mechanical characteristics of inconel 718 layer deposited on AISI 1045 steel substrate using a directed energy deposition process KK Lee, HS Kim, DG Ahn, H Lee Journal of Materials Research and Technology 17, 293-309, 2022 | 8 | 2022 |
| Direct laser writing of graphene oxide patterns using femtosecond laser pulses with different repetition rates LM Ji, H Lee, CHJ Lim, VM Murukeshan, YJ Kim 2017 Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR), 1-3, 2017 | 8 | 2017 |
| A preliminary study on the lamination characteristics of inconel 718 superalloy on S45C structural steel using LENS process HS Kim, H Lee, DG Ahn Journal of the Korean Society of Manufacturing Process Engineers 20 (1), 16-24, 2021 | 7 | 2021 |
| Heterostructure effect at the interface of maraging steel deposited upon carbon steel via directed energy deposition DR Eo, J Yoon, H Lee Materials & Design 225, 111574, 2023 | 6 | 2023 |
