关注
K. NARAYAN PRABHU
K. NARAYAN PRABHU
Professor, Department of Metallurgical and Materials Engineering, NITK
在 nitk.edu.in 的电子邮件经过验证
标题
引用次数
引用次数
年份
Review of non-reactive and reactive wetting of liquids on surfaces
G Kumar, KN Prabhu
Advances in colloid and interface science 133 (2), 61-89, 2007
5392007
Modification of eutectic silicon in Al–Si alloys
S Hegde, KN Prabhu
Journal of materials science 43, 3009-3027, 2008
5092008
Review of thermo-physical properties, wetting and heat transfer characteristics of nanofluids and their applicability in industrial quench heat treatment
G Ramesh, NK Prabhu
Nanoscale research letters 6, 1-15, 2011
1952011
Review of microstructure evolution in hypereutectic Al–Si alloys and its effect on wear properties
K Narayan Prabhu
Transactions of the Indian Institute of Metals 67 (1), 1-18, 2014
1612014
Effect of substrate surface roughness on wetting behaviour of vegetable oils
KN Prabhu, P Fernades, G Kumar
Materials & design 30 (2), 297-305, 2009
1342009
Heat flux transients at the casting/chill interface during solidification of aluminum base alloys
TSP Kumar, KN Prabhu
Metallurgical Transactions B 22, 717-727, 1991
1231991
Wettability of root canal sealers on intraradicular dentine treated with different irrigating solutions
NV Ballal, A Tweeny, K Khechen, KN Prabhu, FR Tay
Journal of dentistry 41 (6), 556-560, 2013
882013
Solidification and casting/mould interfacial heat transfer characteristics of aluminum matrix composites
TPD Rajan, KN Prabhu, RM Pillai, BC Pai
Composites Science and Technology 67 (1), 70-78, 2007
872007
Comparative study of heat transfer and wetting behaviour of conventional and bioquenchants for industrial heat treatment
P Fernandes, KN Prabhu
International Journal of Heat and Mass Transfer 51 (3-4), 526-538, 2008
842008
Review on microstructure evolution in Sn–Ag–Cu solders and its effect on mechanical integrity of solder joints
M Sona, KN Prabhu
Journal of Materials Science: Materials in Electronics 24, 3149-3169, 2013
822013
Effect of modification melt treatment on casting/chill interfacial heat transfer and electrical conductivity of Al–13% Si alloy
KN Prabhu, BN Ravishankar
Materials Science and Engineering: A 360 (1-2), 293-298, 2003
812003
Reactive wetting, evolution of interfacial and bulk IMCs and their effect on mechanical properties of eutectic Sn–Cu solder alloy
KN Prabhu
Advances in Colloid and Interface Science 166 (1-2), 87-118, 2011
802011
Effect of chill thickness and superheat on casting/chill interfacial heat transfer during solidification of commercially pure aluminium
MA Gafur, MN Haque, KN Prabhu
Journal of Materials Processing Technology 133 (3), 257-265, 2003
752003
Oxide bifilms in aluminium alloy castings–a review
R Gopalan, NK Prabhu
Materials Science and Technology 27 (12), 1757-1769, 2011
662011
Determination of wetting behavior, spread activation energy, and quench severity of bioquenchants
KN Prabhu, P Fernandes
Metallurgical and Materials Transactions B 38, 631-640, 2007
632007
Effect of section size and agitation on heat transfer during quenching of AISI 1040 steel
P Fernandes, KN Prabhu
Journal of Materials Processing Technology 183 (1), 1-5, 2007
612007
Nanoquenchants for industrial heat treatment
KN Prabhu, P Fernades
Journal of Materials Engineering and Performance 17, 101-103, 2008
542008
Heat transfer and solidification behaviour of modified A357 alloy
G Kumar, S Hegde, KN Prabhu
Journal of Materials Processing Technology 182 (1-3), 152-156, 2007
542007
New polypropylene supported chitosan NF-membrane for desalination application
M Padaki, AM Isloor, J Fernandes, KN Prabhu
Desalination 280 (1-3), 419-423, 2011
512011
Preparation, characterization and performance study of poly (isobutylene-alt-maleic anhydride)[PIAM] and polysulfone [PSf] composite membranes before and after alkali treatment
M Padaki, AM Isloor, G Belavadi, KN Prabhu
Industrial & engineering chemistry research 50 (11), 6528-6534, 2011
502011
系统目前无法执行此操作,请稍后再试。
文章 1–20