Analysis of engineering geological uncertainties related to tunnelling in Himalayan rock mass conditions KK Panthi Fakultet for ingeniørvitenskap og teknologi, 2006 | 133 | 2006 |
Examples of multiple rock-slope collapses from Köfels (Ötz valley, Austria) and western Norway RL Hermanns, LH Blikra, M Naumann, B Nilsen, KK Panthi, D Stromeyer, ... Engineering Geology 83 (1-3), 94-108, 2006 | 89 | 2006 |
Uncertainty analysis of tunnel squeezing for two tunnel cases from Nepal Himalaya KK Panthi, B Nilsen International Journal of Rock Mechanics and Mining Sciences 44 (1), 67-76, 2007 | 84 | 2007 |
Evaluation of rock bursting phenomena in a tunnel in the Himalayas KK Panthi Bulletin of Engineering Geology and the Environment 71, 761-769, 2012 | 81 | 2012 |
Predicted versus actual rock mass conditions: A review of four tunnel projects in Nepal Himalaya KK Panthi, B Nilsen Tunnelling and underground space technology 22 (2), 173-184, 2007 | 40 | 2007 |
Estimating Tunnel Strain in the Weak and Schistose Rock Mass Influenced by Stress Anisotropy: An Evaluation Based on Three Tunnel Cases from Nepal KK Panthi, PK Shrestha Rock Mechanics and Rock Engineering 51 (6), 1823-1838, 2018 | 36 | 2018 |
Significance of grouting for controlling leakage in water tunnels: A case from Nepal KK Panthi, B Nilsen Proceedings of ITA-AITES 2005 world tunnelling congress and 31st ITA General …, 2005 | 32 | 2005 |
Groundwater effect on faulted rock mass: an evaluation of Modi Khola pressure tunnel in the Nepal Himalaya PK Shrestha, KK Panthi Rock mechanics and rock engineering 47, 1021-1035, 2014 | 30 | 2014 |
Uncertainty analysis for assessing leakage through water tunnels: a case from Nepal Himalaya KK Panthi, B Nilsen Rock mechanics and rock engineering 43, 629-639, 2010 | 30 | 2010 |
Analysis of unlined pressure shafts and tunnels of selected Norwegian hydropower projects CB Basnet, KK Panthi Journal of Rock Mechanics and Geotechnical Engineering 10 (3), 486-512, 2018 | 29 | 2018 |
Norwegian design principle for high pressure tunnels and shafts: its applicability in the Himalaya KK Panthi Nepal Journals OnLine, 2014 | 29 | 2014 |
An analysis on the slaking and disintegration extent of weak rock mass of the water tunnels for hydropower project using modified slake durability test L Selen, KK Panthi, G Vistnes Bulletin of Engineering Geology and the Environment 79, 1919-1937, 2020 | 26 | 2020 |
Slope stability assessment of an open pit mine using three-dimensional rock mass modeling M Morales, KK Panthi, K Botsialas Bulletin of Engineering Geology and the Environment 78, 1249-1264, 2019 | 21 | 2019 |
Analysis of the plastic deformation behavior of schist and schistose mica gneiss at Khimti headrace tunnel, Nepal PK Shrestha, KK Panthi Bulletin of Engineering Geology and the Environment 73, 759-773, 2014 | 21 | 2014 |
Numerical analysis of stresses and displacements for the Tafjord slide, Norway KK Panthi, B Nilsen Bulletin of Engineering Geology and the Environment 65, 57-63, 2006 | 19 | 2006 |
Development of a 3D structural model of a mine by consolidating different data sources M Morales, KK Panthi, K Botsialas, KH Holmøy Bulletin of Engineering Geology and the Environment 78, 35-53, 2019 | 18 | 2019 |
Assessment of the effect of stress anisotropy on tunnel deformation in the Kaligandaki project in the Nepal Himalaya PK Shrestha, KK Panthi Bulletin of Engineering Geology and the Environment 74, 815-826, 2015 | 18 | 2015 |
Evaluation on the minimum principal stress state and potential hydraulic jacking from the shotcrete-lined pressure tunnel: a case from Nepal CB Basnet, KK Panthi Rock Mechanics and Rock Engineering 52, 2377-2399, 2019 | 17 | 2019 |
Effect of power plant operation on pore pressure in jointed rock mass of an unlined hydropower tunnel: an experimental study B Neupane, KK Panthi, K Vereide Rock Mechanics and Rock Engineering 53, 3073-3092, 2020 | 16 | 2020 |
Evaluation of earthquake impact on magnitude of the minimum principal stress along a shotcrete lined pressure tunnel in Nepal KK Panthi, CB Basnet Journal of Rock Mechanics and Geotechnical Engineering 11 (5), 920-934, 2019 | 15 | 2019 |