A review of bast fibres and their composites. Part 1–Fibres as reinforcements J Summerscales, NPJ Dissanayake, AS Virk, W Hall Composites Part A: Applied Science and Manufacturing 41 (10), 1329-1335, 2010 | 810 | 2010 |
A review of bast fibres and their composites. Part 2–Composites J Summerscales, N Dissanayake, A Virk, W Hall Composites Part A: Applied Science and Manufacturing 41 (10), 1336-1344, 2010 | 329 | 2010 |
On the anisotropic mechanical properties of selective laser-melted stainless steel L Hitzler, J Hirsch, B Heine, M Merkel, W Hall, A Öchsner Materials 10 (10), 1136, 2017 | 221 | 2017 |
Direction and location dependency of selective laser melted AlSi10Mg specimens L Hitzler, C Janousch, J Schanz, M Merkel, B Heine, F Mack, W Hall, ... Journal of Materials Processing Technology 243, 48-61, 2017 | 207 | 2017 |
A review of metal fabricated with laser‐and powder‐bed based additive manufacturing techniques: process, nomenclature, materials, achievable properties, and its utilization in … L Hitzler, M Merkel, W Hall, A Öchsner Advanced Engineering Materials 20 (5), 1700658, 2018 | 183 | 2018 |
An evaluation of a project-based learning initiative in engineering education S Palmer, W Hall European journal of engineering education 36 (4), 357-365, 2011 | 182 | 2011 |
Environmental effects on the durability and the mechanical performance of flax fiber/bio-epoxy composites A Moudood, A Rahman, HM Khanlou, W Hall, A Öchsner, G Francucci Composites Part B: Engineering 171, 284-293, 2019 | 157 | 2019 |
Modulus and strength prediction for natural fibre composites AS Virk, W Hall, J Summerscales Materials Science and Technology 28 (7), 864-871, 2012 | 147 | 2012 |
Failure strain as the key design criterion for fracture of natural fibre composites AS Virk, W Hall, J Summerscales Composites Science and Technology 70 (6), 995-999, 2010 | 122 | 2010 |
A review of bast fibres and their composites: Part 3–Modelling J Summerscales, A Virk, W Hall Composites Part A: Applied Science and Manufacturing 44, 132-139, 2013 | 101 | 2013 |
Additive manufacturing of cobalt‐based dental alloys: analysis of microstructure and physicomechanical properties L Hitzler, F Alifui-Segbaya, P Williams, B Heine, M Heitzmann, W Hall, ... Advances in materials science and engineering 2018 (1), 8213023, 2018 | 91 | 2018 |
Effect of moisture in flax fibres on the quality of their composites A Moudood, W Hall, A Öchsner, H Li, A Rahman, G Francucci Journal of Natural Fibers 16 (2), 209-224, 2019 | 71 | 2019 |
Multiple Data Set (MDS) weak-link scaling analysis of jute fibres AS Virk, W Hall, J Summerscales Composites Part A: Applied Science and Manufacturing 40 (11), 1764-1771, 2009 | 63 | 2009 |
Application of experiential learning to improve student engagement and experience in a mechanical engineering course H Li, A Öchsner, W Hall European Journal of Engineering Education 44 (3), 283-293, 2019 | 61 | 2019 |
A longitudinal evaluation of a project-based learning initiative in an engineering undergraduate programme W Hall, S Palmer, M Bennett European Journal of Engineering Education 37 (2), 155-165, 2012 | 61 | 2012 |
Fracture toughness of selective laser melted AlSi10Mg L Hitzler, J Hirsch, J Schanz, B Heine, M Merkel, W Hall, A Öchsner Proceedings of the Institution of Mechanical Engineers, Part L: Journal of …, 2019 | 56 | 2019 |
Tire Modeling Methodology with the Explicit Finite Element Code LS‐DYNA W Hall, JT Mottram, RP Jones Tire science and Technology 32 (4), 236-261, 2004 | 51 | 2004 |
Position dependent surface quality in selective laser melting: Positionsabhängige Oberflächenqualität im selektiven Laserstrahlschmelzen L Hitzler, J Hirsch, M Merkel, W Hall, A Öchsner Materialwissenschaft und Werkstofftechnik 48 (5), 327-334, 2017 | 48 | 2017 |
A fibre diameter distribution factor (FDDF) for natural fibre composites J Summerscales, W Hall, AS Virk Journal of materials science 46, 5876-5880, 2011 | 47 | 2011 |
Tensile properties of jute fibres AS Virk, W Hall, J Summerscales Materials Science and Technology 25 (10), 1289-1295, 2009 | 46 | 2009 |