| A review on laser beam welding of titanium alloys ST Auwal, S Ramesh, F Yusof, SM Manladan The international Journal of advanced manufacturing technology 97, 1071-1098, 2018 | 158 | 2018 |
| A review on laser beam welding of copper alloys ST Auwal, S Ramesh, F Yusof, SM Manladan The International Journal of Advanced Manufacturing Technology 96, 475-490, 2018 | 114 | 2018 |
| Effect of heat treatment temperature on mechanical properties of the AISI 304 stainless steel SA Tukur, MS Dambatta, A Ahmed, NM Mu’az International Journal of Innovative Research in Science, Engineering and …, 2014 | 54 | 2014 |
| Effect of tempering temperature on mechanical properties of medium carbon steel SA Tukur, MM Usman, I Muhammad, NA Sulaiman International Journal of Engineering Trends and Technology 9 (15), 798-800, 2014 | 37 | 2014 |
| Influence of electrodeposited Cu-Ni layer on interfacial reaction and mechanical properties of laser welded-brazed Mg/Ti lap joints ST Auwal, S Ramesh, Z Zhang, J Liu, C Tan, SM Manladan, F Yusof, ... Journal of Manufacturing Processes 37, 251-265, 2019 | 20 | 2019 |
| Effect of copper-nickel interlayer thickness on laser welding-brazing of Mg/Ti alloy ST Auwal, S Ramesh, Z Zhang, F Yusof, J Liu, C Tan, SM Manladan, ... Optics & Laser Technology 115, 149-159, 2019 | 17 | 2019 |
| Comparative study on characteristics of laser welded-brazed AZ31/Ti-6Al-4V lap joints with and without coatings ST Auwal, S Ramesh, F Yusof, CW Tan, ZQ Zhang, XY Zhao, ... The International Journal of Advanced Manufacturing Technology 101, 1023-1040, 2019 | 7 | 2019 |
| Recent developments and challenges in welding of magnesium to titanium alloys ST Auwal, S Ramesh, C Tan, Z Zhang, X Zhao, SM Manladan Advances in materials Research 8 (1), 47-73, 2019 | 7 | 2019 |
| A model study for the electric pulse frequency effects on the solidification behavior of Al-5% Сu alloy Q Jingang, L Yang, SA Tukur Intern. Journal of Scientific & Technology Research 3 (9), 267-274, 2014 | 3 | 2014 |
| Challenges and Advances in Welding and Joining Magnesium Alloy to Steel ST Auwal, MS Dambatta, S Ramesh, T Caiwang Engineering Principles-Welding and Residual Stresses, 2022 | 2 | 2022 |
| Design of self-erecting tower for a wind turbine A Ibrahim, IS Diso, ST Auwal, MA Ibrahim, MS Dambatta, S Ramesh Int. J. Eng. Res. Technol 6 (12), 63-82, 2020 | 2 | 2020 |
| Energy Cost Characteristics of a Micro-Wind Power System Based on Different Capacity Factor: A Case Study of Locations in Nigeria BI Kunya, Y Alhassan, ST Auwal, M Tambaya, D Kurniawan, S Ramesh Proceeding of 5th International Conference on Advances in Manufacturing and …, 2023 | 1 | 2023 |
| Effects of Using Rice Husk and Paper Pulp as Organic Binding Agents on Calorific Value of Biomass (Sawdust) Briquettes NM Mu’az, MS Dambatta, SA Tukur, B Abdullahi, U Abdullahi 2nd National Engineering Conference, ACICON, 1-5, 2016 | 1 | 2016 |
| Comparative study of life cycle carbon emission from photovoltaic and wind power systems: A case study of Kano BI Kunya, Y Alhassan, ST Auwal, A Ibrahim, NM Muaz, MA Ibrahim, ... AIP Conference Proceedings 3161 (1), 2024 | | 2024 |
| Thermal analysis of bayonet tube heat exchangers D Usman, SB Abubakar, ST Auwal, L Jacqueline AIP Conference Proceedings 3161 (1), 2024 | | 2024 |
| Computational analysis of car radiator coolant using nano fluids AS Ahmad, B Abdullahi, ST Auwal, A Ahmed, N Jibrin, A Hussein, ... AIP Conference Proceedings 3161 (1), 2024 | | 2024 |
| Numerical analysis on the effect of Nanocoolant on the performance of monocrystalline PV in temperate regions NM Muhammad, RI Nabage, ST Auwal, BI Kunya, NAC Sidik, ... AIP Conference Proceedings 3161 (1), 2024 | | 2024 |
| Prediction of volume loss of reinforced polytetrafluoroethylene matrix composites using machine learning algorithms MA Ibrahim, AY Gidado, ST Auwal, BI Kunya, M Nura, L Jacqueline AIP Conference Proceedings 3161 (1), 2024 | | 2024 |
| Using unsupervised learning methods to group African countries based on COVID-19 prevalence AA Osi, A Usman, ST Auwal, MA Ibrahim, L Jacqueline AIP Conference Proceedings 3161 (1), 2024 | | 2024 |
| DESIGN AND CONSTRUCTION OF A 500W WIND GENERATOR USING THIN SHEET METAL TURBINE BLADES A Ibrahim, BI Kunya, A Ahmad, KP Dare, S Isah, AO Job, ST Auwal, ... GSJ 11 (6), 2023 | | 2023 |
Professor Ramesh SinghProfessor of Mechanical and Materials Engineering, Faculty of Engineering, University of Malaya在 um.edu.my 的电子邮件经过验证
