| Structural properties of Ti/Al clads manufactured by explosive welding and annealing DM Fronczek, J Wojewoda-Budka, R Chulist, A Sypien, A Korneva, ... Materials & Design 91, 80-89, 2016 | 196 | 2016 |
| Wetting of Cu by Bi–Ag based alloys with Sn and Zn additions P Fima, W Gąsior, A Sypień, Z Moser Journal of Materials Science 45, 4339-4344, 2010 | 29 | 2010 |
| Enthalpy of formation of intermetallic phases from Al–Ni and Al–Ni–Ti systems A Dębski, W Gąsior, A Sypień, A Góral Intermetallics 42, 92-98, 2013 | 25 | 2013 |
| Thermodynamic and Kinetic Aspects of the Hot Dip (Zn)-Coating Formation. Part I W Wołczyński, Z Pogoda, G Garzeł, B Kucharska, A Sypień, T Okane Archives of Metallurgy and Materials 59 (3), 1223-1233, 2014 | 23 | 2014 |
| Wetting of Sn-Zn-xIn (x = 0.5, 1.0, 1.5 wt%) Alloys on Cu and Ni Substrates P Fima, T Gancarz, J Pstruś, A Sypień Journal of materials engineering and performance 21, 595-598, 2012 | 23 | 2012 |
| TEM studies of the FeSiB amorphous alloy nanocrystallized by means of Nd: YAG-pulsed laser heating A Sypień, J Kusiński, GJ Kusiński, EC Nelson Materials chemistry and physics 81 (2-3), 390-392, 2003 | 21 | 2003 |
| Microstructure and properties of cold consolidated amorphous ribbons from (NiCu) ZrTiAlSi alloys T Czeppe, G Korznikova, J Morgiel, A Korznikov, NQ Chinh, P Ochin, ... Journal of alloys and compounds 483 (1-2), 74-77, 2009 | 16 | 2009 |
| Preparation of Ti-Ni-Fe phase by levitation and its structural characterization A. Sypien Materials Science and Technology 26 (1), 31-35, 2010 | 14 | 2010 |
| Towards Efficient Luminescent Solar Energy Concentrator Using Cuprorivaite Infrared Phosphor (CaCuSi4O10)—Effect of Dispersing Method on … P Sobik, O Jeremiasz, P Nowak, A Sala, B Pawłowski, G Kulesza-Matlak, ... Materials 14 (14), 3952, 2021 | 13 | 2021 |
| Influence of phosphorous content on microstructure development at the Ni-P plating/SAC interface Z Huber, J Wojewoda-Budka, A Wierzbicka-Miernik, A Sypien, ... Electronic Materials Letters 12, 178-185, 2016 | 13 | 2016 |
| Thermal stability and mechanical properties of the TiCuZrPd glasses with 10, 14 and 20 at.% Pd, NQC A.Sypien, T. Czeppe, G. Garzeł, L. Lityńska-Dobrzyńska, J. Latuch Journal of Alloys and Compounds, 615, 108-112, 2014 | 13 | 2014 |
| Black silicon obtained in two-step short wet etching as a texture for silicon solar cells-surface microstructure and optical properties studies G Kulesza-Matlak, K Gawlińska, Z Starowicz, A Sypień, K Drabczyk, ... Archives of Metallurgy and Materials 63 (2), 1009-1017, 2018 | 12 | 2018 |
| Kinetics of the (Zn)-Coating Deposition During Stable and Meta-Stable Solidifications. Part III W Wołczyński, B Kucharska, G Garzeł, A Sypień, Z Pogoda, T Okane Archives of Metallurgy and Materials 60, 2015 | 10 | 2015 |
| Heat capacities of some binary intermetallic compounds in Al-Fe-Ni-Ti system B Onderka, A Sypień, A Wierzbicka-Miernik, T Czeppe, LA Zabdyr Archives of Metallurgy and Materials 55 (2), 435-439, 2010 | 10 | 2010 |
| Determination of thermophysical and thermodynamic properties, of Ag-Mg alloys S Terlicka, A Dębski, A Sypien, W Gąsior, A Budziak Materials Today Communications 29, 102946, 2021 | 9 | 2021 |
| TiO2 and TiO2–Ag powders and thin layer toward self-cleaning coatings for PV panel integrated with sound-absorbing screens: Technical approaches A Gonciarz, R Pich, KA Bogdanowicz, K Drabczyk, A Sypien, Ł Major, ... Journal of Power Sources Advances 8, 100053, 2021 | 8 | 2021 |
| Biomechanical and morphological stability of acellular scaffolds for tissue-engineered heart valves depends on different storage conditions AS P. Wilczek, P. Gach, K. Jendryczko, M. Marcisz G. Wilczek, R. Major, A ... Journal of Materials Science: Materials in Medicine 29 (106), 3-16, 2018 | 8* | 2018 |
| Modification of the Ti40Cu36Zr10Pd14 BMG Crystallization Mechanism with Heating Rates 10-140 K/min T Czeppe, A Sypien, A Wierzbicka-Miernik Journal of Materials Engineering and Performance 25, 5289-5301, 2016 | 8 | 2016 |
| Properties of the Ti40Zr10Cu36Pd14 BMG Modified by Sn and Nb Additions A Sypien, M Stoica, T Czeppe Journal of Materials Engineering and Performance 25, 800-808, 2016 | 8 | 2016 |
| Model for the Protective Coating Formation During Hot Dip Galvanizing. Part II W Wołczyński, Z Pogoda, G Garzeł, B Kucharska, A Sypień, T Okane Archives of Metallurgy and Materials 59, 2014 | 8 | 2014 |
Anna Wierzbicka-MiernikInstitute of Metallurgy and Materials Science PAS在 imim.pl 的电子邮件经过验证
