关注
Majid Alitavoli
Majid Alitavoli
Department of Mechanical Engineering, University of Guilan, Rasht, Iran
在 guilan.ac.ir 的电子邮件经过验证 - 首页
标题
引用次数
引用次数
年份
Theoretical analysis on the effect of uniform and localized impulsive loading on the dynamic plastic behaviour of fully clamped thin quadrangular plates
TM Mostofi, H Babaei, M Alitavoli
Thin-Walled Structures 109, 367-376, 2016
812016
Large transverse deformation of double-layered rectangular plates subjected to gas mixture detonation load
TM Mostofi, H Babaei, M Alitavoli, G Lu, D Ruan
International Journal of Impact Engineering 125, 93-106, 2019
672019
The influence of gas mixture detonation loads on large plastic deformation of thin quadrangular plates: Experimental investigation and empirical modelling
TM Mostofi, H Babaei, M Alitavoli
Thin-Walled Structures 118, 1-11, 2017
642017
Empirical modelling for prediction of large deformation of clamped circular plates in gas detonation forming process
H Babaei, T Mirzababaie Mostofi, M Alitavoli, A Darvizeh
Experimental Techniques 40, 1485-1494, 2016
602016
Experimental and theoretical study on large ductile transverse deformations of rectangular plates subjected to shock load due to gas mixture detonation
T Mirzababaie Mostofi, H Babaei, M Alitavoli
Strain 53 (4), e12235, 2017
582017
Dynamic plastic response of double-layered circular metallic plates due to localized impulsive loading
M Rezasefat, T Mirzababaie Mostofi, H Babaei, M Ziya-Shamami, ...
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of …, 2019
572019
On dimensionless numbers for predicting large ductile transverse deformation of monolithic and multi-layered metallic square targets struck normally by rigid spherical projectile
TM Mostofi, H Babaei, M Alitavoli, S Hosseinzadeh
Thin-Walled Structures 112, 118-124, 2017
512017
Experimental investigation and analytical modelling for forming of circular-clamped plates by using gases mixture detonation
H Babaei, T Mirzababaie Mostofi, M Alitavoli
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of …, 2020
482020
Gas mixture detonation method, a novel processing technique for metal powder compaction: Experimental investigation and empirical modeling
H Babaei, TM Mostofi, M Namdari-Khalilabad, M Alitavoli, K Mohammadi
Powder Technology 315, 171-181, 2017
472017
Experimental and theoretical study of large deformation of rectangular plates subjected to water hammer shock loading
H Babaei, T Mirzababaie Mostofi, M Alitavoli
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of …, 2017
432017
Low velocity impact of empty and foam filled circumferentially grooved thick-walled circular tubes
A Darvizeh, A Meshkinzar, M Alitavoli, R Rajabiehfard
Thin-Walled Structures 110, 97-105, 2017
432017
Experimental and analytical investigation into large ductile transverse deformation of monolithic and multi-layered metallic square targets struck normally by rigid spherical …
H Babaei, TM Mostofi, M Alitavoli
Thin-Walled Structures 107, 257-265, 2016
402016
Study on the response of circular thin plate under low velocity impact
H Babaei, TM Mostofi, M Alitavoli
Geomechanics & engineering 9 (2), 207-218, 2015
402015
Experimental and analytical investigation into plastic deformation of circular plates subjected to hydrodynamic loading
H Babaei, A Darvizeh, M Alitavoli, T Mirzababaie Mostofi
Modares Mechanical Engineering 15 (2), 305-312, 2015
382015
Experimental study and analytical modeling for inelastic response of rectangular plates under hydrodynamic loads
H Babaei, T Mirzababaie Mostofi, M Alitavoli
Modares Mechanical Engineering 15 (4), 361-368, 2015
352015
Closed-form analytical analysis on the effect of coupled membrane and bending strains on the dynamic plastic behaviour of fully clamped thin quadrangular plates due to uniform …
TM Mostofi, A Golbaf, A Mahmoudi, M Alitavoli, H Babaei
Thin-Walled Structures 123, 48-56, 2018
342018
Experimental and numerical investigation of dynamic plastic behavior of tube with different thickness distribution under axial impact
R Rajabiehfard, A Darvizeh, M Alitavoli, H Sadeghi, N Noorzadeh, ...
Thin-Walled Structures 109, 174-184, 2016
322016
Theoretical and experimental analysis of elastic–plastic cylindrical shells under two types of axial impacts
R Rajabiehfard, A Darvizeh, M Darvizeh, R Ansari, M Alitavoli, H Sadeghi
Thin-Walled Structures 107, 315-326, 2016
292016
Experimental investigation and dimensionless analysis of forming of rectangular plates subjected to hydrodynamic loading
H Babaei, T Mirzababaie Mostofi, M Alitavoli, A Saeidinejad
Journal of Applied Mechanics and Technical Physics 58, 139-147, 2017
282017
High rate electrical discharge compaction of powders under controlled oxidation
M Alitavoli, A Darvizeh
Journal of materials processing technology 209 (7), 3542-3549, 2009
222009
系统目前无法执行此操作,请稍后再试。
文章 1–20