| Optimizing the coupled effects of Hall-Petch and precipitation strengthening in a Al0. 3CoCrFeNi high entropy alloy B Gwalani, V Soni, M Lee, SA Mantri, Y Ren, R Banerjee Materials & Design 121, 254-260, 2017 | 356 | 2017 |
| Additive Manufacturing of Magnetic Materials V Chaudhary, SA Mantri, RV Ramanujan, R Banerjee Progress in Materials Science, 100688, 2020 | 205 | 2020 |
| Enhancing strength and strain hardenability via deformation twinning in fcc-based high entropy alloys reinforced with intermetallic compounds D Choudhuri, B Gwalani, S Gorsse, M Komarasamy, SA Mantri, ... Acta Materialia 165, 420-430, 2019 | 173 | 2019 |
| Tuning the scale of α precipitates in β-titanium alloys for achieving high strength SA Mantri, D Choudhuri, T Alam, GB Viswanathan, JM Sosa, HL Fraser, ... Scripta Materialia 154, 139-144, 2018 | 159 | 2018 |
| Strengthening strategy for a ductile metastable β-titanium alloy using low-temperature aging F Sun, JY Zhang, P Vermaut, D Choudhuri, T Alam, SA Mantri, P Svec, ... Materials Research Letters 5 (8), 547-553, 2017 | 127 | 2017 |
| Formation of a Huesler-like L21 phase in a CoCrCuFeNiAlTi high-entropy alloy D Choudhuri, T Alam, T Borkar, B Gwalani, AS Mantri, SG Srinivasan, ... Scripta Materialia 100, 36-39, 2015 | 125 | 2015 |
| On the heterogeneous nature of deformation in a strain-transformable beta metastable Ti-V-Cr-Al alloy L Lilensten, Y Danard, C Brozek, S Mantri, P Castany, T Gloriant, ... Acta Materialia 162, 268-276, 2019 | 110 | 2019 |
| Additive manufacturing of functionally graded Co–Fe and Ni–Fe magnetic materials V Chaudhary, NMSKK Yadav, SA Mantri, S Dasari, A Jagetia, ... Journal of Alloys and Compounds 823, 153817, 2020 | 102 | 2020 |
| Laser additive processing of a functionally graded internal fracture fixation plate DD Lima, SA Mantri, CV Mikler, R Contieri, CJ Yannetta, KN Campo, ... Materials & Design 130, 8-15, 2017 | 84 | 2017 |
| Laser additive manufacturing of compositionally graded AlCrFeMoVx (x= 0 to 1) high-entropy alloy system B Gwalani, V Soni, OA Waseem, SA Mantri, R Banerjee Optics & Laser Technology 113, 330-337, 2019 | 79 | 2019 |
| Change in the deformation mode resulting from beta-omega compositional partitioning in a TiMo alloy: Room versus elevated temperature SA Mantri, D Choudhuri, T Alam, V Ageh, F Sun, F Prima, R Banerjee Scripta Materialia 130, 69-73, 2017 | 75 | 2017 |
| Enhanced tensile yield strength in laser additively manufactured Al0. 3CoCrFeNi high entropy alloy MSKKY Nartu, T Alam, S Dasari, SA Mantri, S Gorsse, H Siller, N Dahotre, ... Materialia 9, 100522, 2020 | 65 | 2020 |
| The effect of boron on the grain size and texture in additively manufactured β-Ti alloys SA Mantri, T Alam, D Choudhuri, CJ Yannetta, CV Mikler, PC Collins, ... Journal of Materials Science, 1-12, 2017 | 63 | 2017 |
| In situ reactions during direct laser deposition of Ti-B4C composites MSKKY Nartu, SA Mantri, MV Pantawane, YH Ho, B McWilliams, K Cho, ... Scripta Materialia 183, 28-32, 2020 | 58 | 2020 |
| A closer look at the in vitro electrochemical characterisation of titanium alloys for biomedical applications using in-situ methods JL Wang, RL Liu, T Majumdar, SA Mantri, VA Ravi, R Banerjee, N Birbilis Acta biomaterialia 54, 469-478, 2017 | 56 | 2017 |
| Effect of micro-segregation of alloying elements on the precipitation behaviour in laser surface engineered Alloy 718 SA Mantri, S Dasari, A Sharma, T Alam, MV Pantawane, M Pole, ... Acta Materialia 210, 116844, 2021 | 55 | 2021 |
| Influence of fine-scale alpha precipitation on the mechanical properties of the beta titanium alloy beta-21S SA Mantri, D Choudhuri, A Behera, JD Cotton, N Kumar, R Banerjee Metallurgical and Materials Transactions A 46, 2803-2808, 2015 | 54 | 2015 |
| Magnetic and mechanical properties of an additively manufactured equiatomic CoFeNi complex concentrated alloy M Nartu, A Jagetia, V Chaudhary, SA Mantri, E Ivanov, NB Dahotre, ... Scripta Materialia 187, 30-36, 2020 | 51 | 2020 |
| Deformation induced hierarchical twinning coupled with omega transformation in a metastable β-Ti alloy SA Mantri, F Sun, D Choudhuri, T Alam, B Gwalani, F Prima, R Banerjee Scientific reports 9 (1), 1334, 2019 | 51 | 2019 |
| Microstructure and micro-texture evolution of additively manufactured β-Ti alloys SA Mantri, R Banerjee Additive Manufacturing 23, 86-98, 2018 | 45 | 2018 |
Rajarshi BanerjeeProfessor of Materials Science and Engineering, University of North Texas在 unt.edu 的电子邮件经过验证
