| Simulation and motion study of mechanical integrator 3D model B Popkonstantinovic, M Stojicevic, Z Jeli, M Obradovic, LP Dragos FME Transactions 47 (2), 299-303, 2019 | 11 | 2019 |
| A 3D analysis of geometrical factors and their influence on air flow around a satellite dish Z Jeli, M Stojićević, I Cvetkovic, A Duta, DL Popa FME Transactions 45 (2), 262-267, 2017 | 11 | 2017 |
| Designs of Solar Concentrators. M Stojicevic, Z Jeli, M Obradovic, R Obradovic, C Marinescu FME Transactions 47 (2), 2019 | 9 | 2019 |
| A novel walker with mechanically established walking and standing mechanism R Andrejević, G Šiniković, M Stojićević, M Stoimenov, L Miladinović, ... T ehnicki Vjesni, 927-931, 2013 | 8 | 2013 |
| 3D analysis of different metamaterial geometry and simulation of metamaterial usage B Kosić, M Stojićević, Z Jeli, B Pokonstantinović, A Duta, A Dragičević FME Transactions 47 (2), 349-354, 2019 | 6 | 2019 |
| The Eclipses Abacus, the mechanical predictor of the solar and lunar eclipses B Popkonstantinović, L Miladinović, R Obradović, Z Jeli, M Stojićević Simulation 95 (6), 499-507, 2019 | 5 | 2019 |
| The Man who Invented Descriptive Geometry. ID Cvetković, MD Stojićević, H Stachel, RG Milićević, ... FME Transactions 47 (2), 2019 | 5 | 2019 |
| A bipedal mechanical walker with balancing mechanism M Stojićević, M Stoimenov, Z Jeli Tehnički vjesnik 25 (1), 118-124, 2018 | 5 | 2018 |
| Geometrical and mechanical characteristics of deformed balance spring obtained by simulation study B Popkonstantinovic, R Obradovic, M Obradovic, Z Jeli, M Stojicevic Simulation 92 (11), 981-997, 2016 | 5 | 2016 |
| Geometrical Characteristics and Solid Modeling of the Grasshopper Escapement Mechanism B Popkonstantinović, L Miladinović, M Obradović, M Stojićević Proceedings. Vol. 1/4th International Scientific Conference on Geometry and …, 2014 | 4 | 2014 |
| Anaglyph and 3D Model usage in education of Mechanical Engineers Z Jeli, B Popkonstantinovic, M Stojicevic, L Miladinovic Journal of Industrial Design and Engineering Graphics 12 (1), 231-236, 2017 | 3 | 2017 |
| 3D modeling and analysis of ski binding mechanism Z Jeli, B Kosic, M Stojicevic, S Berdic Advances in Mechanism and Machine Science: Proceedings of the 15th IFToMM …, 2019 | 2 | 2019 |
| Usage of 3D computer modelling in learning engineering graphics Z Jeli, B Popokonstantinovic, M Stojicevic Virtual Learning, 2016 | 2 | 2016 |
| Examination of the 3D model of Satelite antenna dish-fluid flow air analysis Z Jeli, M Stojićević 1st International Symposium on Machines, Mechanisms and Mechatronics-Current …, 2014 | 2 | 2014 |
| Catenary-its history, significance and application I Cvetković, A Cvetković, B Popkonstantinović, M Stojićević Structural Integrity and Life-Integritet I Vek Konstrukcija 21 (2), 191-195, 2021 | 1 | 2021 |
| Stereographic projection of the heavens over belgrade used for the construction of astronomical city clock I Cvetkovic, B Popkonstantinovic, M Stojicevic, R Obradovic, R Milicevic Journal of Industrial Design and Engineering Graphics 14 (1), 57-60, 2019 | 1 | 2019 |
| Mechanism with approximately straight-line path of dyad M Stojićević, M Stoimenov, D Petrović, U Bugarić | 1 | 2015 |
| ANALYSIS OF A PTC SYSTEMS WITH MOVING FOCAL POINT M Stojićević, B Popkonstantinović, Z Jeli, I Cvetković, B Kosić The 9th International Scientific Conference on Geometry and Graphics …, 2023 | | 2023 |
| GEOMETRIC PARAMETERS OF THE CLOCK DIAL R Milicevic, M Stojicevic, B Popkonstantinovic1c, I Cvetkovic IETI Transactions on Ergonomics and Safety 5 (1), 15-23, 2021 | | 2021 |
| The Design and Simulation of an Astronomical Clock B Popkonstantinović, R Obradović, M Stojićević, Z Jeli, I Cvetković, ... Applied Sciences 11 (9), 3989, 2021 | | 2021 |
Zorana Jelivanredni profesor在 mas.bg.ac.rs 的电子邮件经过验证
Zorana Jelivanredni profesor在 mas.bg.ac.rs 的电子邮件经过验证
Branislav PopkonstantinovićFaculty of Mechanical Engineering, Belgrade在 mas.bg.ac.rs 的电子邮件经过验证