Ablation and thermal degradation behaviour of a composite based on resol type phenolic resin: process modeling and experimental AR Bahramian, M Kokabi, MHN Famili, MH Beheshty Polymer 47 (10), 3661-3673, 2006 | 198 | 2006 |
An empirical fatigue-life model for high-performance fibre composites with and without impact damage MH Beheshty, B Harris, T Adam Composites Part A: Applied Science and Manufacturing 30 (8), 971-987, 1999 | 116 | 1999 |
A constant-life model of fatigue behaviour for carbon-fibre composites: the effect of impact damage MH Beheshty, B Harris Composites Science and Technology 58 (1), 9-18, 1998 | 102 | 1998 |
Toughening of dicyandiamide-cured DGEBA-based epoxy resins by CTBN liquid rubber R Akbari, MH Beheshty, M Shervin Iranian Polymer Journal 22, 313-324, 2013 | 97 | 2013 |
Curing behavior of dicyandiamide/epoxy resin system using different accelerators M Hayaty, H Honarkar, MH Beheshty Iranian Polymer Journal 22, 591-598, 2013 | 76 | 2013 |
High temperature ablation of kaolinite layered silicate/phenolic resin/asbestos cloth nanocomposite AR Bahramian, M Kokabi, MHN Famili, MH Beheshty Journal of hazardous materials 150 (1), 136-145, 2008 | 76 | 2008 |
Advanced integral isoconversional analysis for evaluating and predicting the kinetic parameters of the curing reaction of epoxy prepreg M Vafayan, MH Beheshty, MHR Ghoreishy, H Abedini Thermochimica Acta 557, 37-43, 2013 | 58 | 2013 |
Cure kinetics of a glass/epoxy prepreg by dynamic differential scanning calorimetry M Hayaty, MH Beheshty, M Esfandeh Journal of applied polymer science 120 (1), 62-69, 2011 | 57 | 2011 |
A new approach for determination of gel time of a glass/epoxy prepreg ME M Hayaty, MH Beheshty Journal of Applied Polymer Science 120 (3), 1483-1489, 2011 | 56 | 2011 |
The effect of reactive diluent on mechanical properties and microstructure of epoxy resins AS M Khalina, MH Beheshty Polymer Bulletin 76 (8), 3905-3927, 2019 | 53 | 2019 |
Effect of tertiary amine accelerators with different substituents on curing kinetics and reactivity of epoxy/dicyandiamide system M Hesabi, A Salimi, MH Beheshty Polymer Testing 59, 344-354, 2017 | 50 | 2017 |
Effect of reinforcement type on high velocity impact response of GRP plates using a sharp tip projectile A Sabet, N Fagih, MH Beheshty International Journal of Impact Engineering 38 (8-9), 715-722, 2011 | 48 | 2011 |
Low profile unsaturated polyester resin–clay nanocomposite properties MH Beheshty, M Vafayan, M Poorabdollah Polymer composites 30 (5), 629-638, 2009 | 43 | 2009 |
Experimental study of sharp‐tipped projectile perforation of GFRP plates containing sand filler under high velocity impact and quasi‐static loadings AR Sabet, MH Beheshty, H Rahimi Polymer Composites 30 (10), 1497-1509, 2009 | 38 | 2009 |
Thermal degradation process of resol type phenolic matrix/kaolinite layered silicate nanocomposite AR Bahramian, M KOUKABI, FMH NAVID, MH BEHESHTI IRANIAN POLYMER JOURNAL (ENGLISH) 16 (684), 375-387, 2007 | 37 | 2007 |
A study on the effects of SEBS‐g‐MAH on the phase morphology and mechanical properties of polypropylene/polycarbonate/SEBS ternary polymer blends OM Jazani, A Arefazar, SH Jafari, MH Beheshty, A Ghaemi Journal of Applied Polymer Science 121 (5), 2680-2687, 2011 | 35 | 2011 |
Isothermal differential scanning calorimetry study of a glass/epoxy prepreg M Hayaty, MH Beheshty, M Esfandeh Polymers for Advanced Technologies 22 (6), 1001-1006, 2011 | 35 | 2011 |
Development of an optimized thermal cure cycle for a complex-shape composite part using a coupled finite element/genetic algorithm technique M Vafayan, MHR Ghoreishy, H Abedini, MH Beheshty Iranian Polymer Journal 24, 459-469, 2015 | 31 | 2015 |
Heat stress assessment in outdoor workplaces of a hot arid climate based on meteorological data: A case study in Qom, Iran R Hajizadeh, DS FARHANG, A Mehri, F Golbabaei, MH Beheshti, ... JOURNAL OF MILITARY MEDICINE 17 (2), 89-95, 2015 | 31 | 2015 |
Preparation and rheological characterization of phenolic/glass prepregs S Shaghaghi, MH Beheshty, H Rahimi IRANIAN POLYMER JOURNAL (ENGLISH) 20 (12138), 969-977, 2011 | 31 | 2011 |