| The role of triboparticulates in dry sliding wear J Jiang, FH Stott, MM Stack Tribology International 31 (5), 245-256, 1998 | 300 | 1998 |
| On erosion issues associated with the leading edge of wind turbine blades MH Keegan, DH Nash, MM Stack Journal of Physics D: Applied Physics 46 (38), 383001, 2013 | 295 | 2013 |
| Modelling the tribo-corrosion interaction in aqueous sliding conditions J Jiang, MM Stack, A Neville Tribology International 35 (10), 669-679, 2002 | 237 | 2002 |
| A mathematical model for sliding wear of metals at elevated temperatures J Jiang, FH Stott, MM Stack Wear 181, 20-31, 1995 | 162 | 1995 |
| Some frictional features associated with the sliding wear of the nickel-base alloy N80A at temperatures to 250 C J Jiang, FH Stott, MM Stack Wear 176 (2), 185-194, 1994 | 156 | 1994 |
| Characterization of synergistic effects between erosion and corrosion in an aqueous environment using electrochemical techniques S Zhou, MM Stack, RC Newman Corrosion 52 (12), 934-946, 1996 | 153 | 1996 |
| The corrosion behaviour of macroparticle defects in arc bond-sputtered CrN/NbN superlattice coatings HW Wang, MM Stack, SB Lyon, P Hovsepian, WD Münz Surface and Coatings Technology 126 (2-3), 279-287, 2000 | 146 | 2000 |
| A generic model for dry sliding wear of metals at elevated temperatures J Jiang, FH Stott, MM Stack Wear 256 (9-10), 973-985, 2004 | 143 | 2004 |
| Mapping erosion-corrosion of carbon steel in oil exploration conditions: Some new approaches to characterizing mechanisms and synergies MM Stack, GH Abdulrahman Tribology International 43 (7), 1268-1277, 2010 | 139 | 2010 |
| Erosion–corrosion mapping of Fe in aqueous slurries: some views on a new rationale for defining the erosion–corrosion interaction MM Stack, N Pungwiwat Wear 256 (5), 565-576, 2004 | 125 | 2004 |
| Wear maps for TiC composite based coatings deposited on 303 stainless steel G Rasool, MM Stack Tribology International 74, 93-102, 2014 | 105 | 2014 |
| Modelling sliding wear: from dry to wet environments J Jiang, MM Stack Wear 261 (9), 954-965, 2006 | 100 | 2006 |
| Some comments on mapping the combined effects of slurry concentration, impact velocity and electrochemical potential on the erosion–corrosion of WC/Co–Cr coatings MM Stack, TM Abd El-Badia Wear 264 (9-10), 826-837, 2008 | 94 | 2008 |
| Mapping tribo-corrosion processes in dry and in aqueous conditions: some new directions for the new millennium MM Stack Tribology International 35 (10), 681-689, 2002 | 93 | 2002 |
| A methodology for the construction of the erosion-corrosion map in aqueous environments MM Stack, N Corlett, S Zhou Wear 203, 474-488, 1997 | 92 | 1997 |
| Mapping erosion–corrosion of WC/Co–Cr based composite coatings: particle velocity and applied potential effects MM Stack, TM Abd El Badia Surface and Coatings Technology 201 (3-4), 1335-1347, 2006 | 90 | 2006 |
| Micro-abrasion–corrosion of a Co–Cr/UHMWPE couple in Ringer's solution: An approach to construction of mechanism and synergism maps for application to bio-implants MM Stack, J Rodling, MT Mathew, H Jawan, W Huang, G Park, C Hodge Wear 269 (5-6), 376-382, 2010 | 88 | 2010 |
| Mapping erosion–corrosion of carbon steel in oil–water solutions: Effects of velocity and applied potential MM Stack, GH Abdulrahman Wear 274, 401-413, 2012 | 86 | 2012 |
| Modelling particulate erosion–corrosion in aqueous slurries: some views on the construction of erosion–corrosion maps for a range of pure metals MM Stack, BD Jana Wear 256 (9-10), 986-1004, 2004 | 86 | 2004 |
| Identification of transitions in erosion-corrosion regimes in aqueous environments MM Stack, S Zhou, RC Newman Wear 186, 523-532, 1995 | 86 | 1995 |
Mathew T MathewProfessor, Department of Biomedical Science, Director of Faculty Research,UIC School of Medicine在 uic.edu 的电子邮件经过验证
