Combustion characteristics and emissions of Fischer–Tropsch diesel fuels in IC engines SS Gill, A Tsolakis, KD Dearn, J Rodríguez-Fernández Progress in Energy and Combustion Science 37 (4), 503-523, 2011 | 323 | 2011 |
Synergistic lubricating behaviors of graphene and MoS2 dispersed in esterified bio-oil for steel/steel contact Y Xu, Y Peng, KD Dearn, X Zheng, L Yao, X Hu Wear 342, 297-309, 2015 | 153 | 2015 |
The effect of the addition of individual methyl esters on the combustion and emissions of ethanol and butanol-diesel blends E Sukjit, JM Herreros, KD Dearn, R García-Contreras, A Tsolakis Energy, 2012 | 152 | 2012 |
The role of soot particles in the tribological behavior of engine lubricating oils E Hu, X Hu, T Liu, L Fang, KD Dearn, H Xu Wear 304 (1-2), 152-161, 2013 | 142 | 2013 |
The wear of PEEK in rolling–sliding contact–Simulation of polymer gear applications T Hoskins, K Dearn, YK Chen, S Kukureka Wear 309, 35-42, 2014 | 121 | 2014 |
Mechanical performance of PEEK produced by additive manufacturing TJ Hoskins, KD Dearn, SN Kukureka Polymer testing 70, 511-519, 2018 | 98 | 2018 |
Applications of dry film lubricants for polymer gears KD Dearn, TJ Hoskins, DG Petrov, SC Reynolds, R Banks Wear 298, 99-108, 2013 | 95 | 2013 |
Effect of fuel injector deposit on spray characteristics, gaseous emissions and particulate matter in a gasoline direct injection engine C Jiang, H Xu, D Srivastava, X Ma, K Dearn, R Cracknell, ... Applied energy 203, 390-402, 2017 | 85 | 2017 |
Effect of hydrogen on butanol–biodiesel blends in compression ignition engines E Sukjit, JM Herreros, KD Dearn, A Tsolakis, K Theinnoi International journal of hydrogen energy 38 (3), 1624-1635, 2013 | 83 | 2013 |
Acoustic noise from polymer gears–A tribological investigation TJ Hoskins, KD Dearn, SN Kukureka, D Walton Materials & Design 32 (6), 3509-3515, 2011 | 72 | 2011 |
Enhancing the lubricity of an environmentally friendly Swedish diesel fuel MK1 E Sukjit, KD Dearn Wear 271 (9-10), 1772-1777, 2011 | 69 | 2011 |
Finding synergies in fuels properties for the design of renewable fuels–Hydroxylated biodiesel effects on butanol-diesel blends E Sukjit, JM Herreros, J Piaszyk, KD Dearn, A Tsolakis Environmental science & technology 47 (7), 3535-3542, 2013 | 66 | 2013 |
A kinematic analysis of meshing polymer gear teeth M Karimpour, KD Dearn, D Walton Proceedings of the Institution of Mechanical Engineers, Part L: Journal of …, 2010 | 66 | 2010 |
Tribological behaviors of Ni-modified citric acid carbon quantum dot particles as a green additive in polyethylene glycol Z Tu, E Hu, B Wang, KD David, P Seeger, M Moneke, R Stengler, K Hu, ... Friction 8, 182-197, 2020 | 62 | 2020 |
Fabrication and tribological characterization of laser textured boron cast iron surfaces Y Xu, Y Peng, KD Dearn, T You, J Geng, X Hu Surface and Coatings Technology 313, 391-401, 2017 | 52 | 2017 |
Lubrication regimes in high‐performance polymer spur gears KD Dearn, TJ Hoskins, L Andrei, D Walton Advances in Tribology 2013 (1), 987251, 2013 | 51 | 2013 |
Strength of poly-ether-ether-ketone: Effects of sterilisation and thermal ageing H Xin, DET Shepherd, KD Dearn Polymer testing 32 (6), 1001-1005, 2013 | 50 | 2013 |
A tribological assessment of a PEEK based self-mating total cervical disc replacement H Xin, DET Shepherd, KD Dearn Wear 303 (1), 473-479, 2013 | 50 | 2013 |
Synergistic effects of electroless piston ring coatings and nano-additives in oil on the friction and wear of a piston ring/cylinder liner pair Y Xu, Q Zheng, J Geng, Y Dong, M Tian, L Yao, KD Dearn Wear 422, 201-211, 2019 | 48 | 2019 |
Tribological assessment of coated piston ring-cylinder liner contacts under bio-oil lubricated conditions Y Peng, Y Xu, J Geng, KD Dearn, X Hu Tribology International 107, 283-293, 2017 | 44 | 2017 |