Additive manufacturing of ceramics: issues, potentialities, and opportunities A Zocca, P Colombo, CM Gomes, J Günster Journal of the American Ceramic Society 98 (7), 1983-2001, 2015 | 1092 | 2015 |
SiOC ceramics with ordered porosity by 3D-printing of a preceramic polymer A Zocca, CM Gomes, A Staude, E Bernardo, J Günster, P Colombo Journal of Materials Research 28 (17), 2243-2252, 2013 | 122 | 2013 |
Direct Ink Writing of a Preceramic Polymer and Fillers to Produce Hardystonite (Ca2ZnSi2O7) Bioceramic Scaffolds A Zocca, G Franchin, H Elsayed, E Gioffredi, E Bernardo, P Colombo Journal of the American Ceramic Society 99 (6), 1960-1967, 2016 | 108 | 2016 |
3D-printed silicate porous bioceramics using a non-sacrificial preceramic polymer binder A Zocca, H Elsayed, E Bernardo, CM Gomes, MA Lopez-Heredia, ... Biofabrication 7 (2), 025008, 2015 | 101 | 2015 |
LSD-based 3D printing of alumina ceramics A Zocca, P Lima, J Günster Journal of ceramic science and technology 8 (1), 141-148, 2017 | 95 | 2017 |
LAS glass–ceramic scaffolds by three-dimensional printing A Zocca, CM Gomes, E Bernardo, R Müller, J Günster, P Colombo Journal of the European Ceramic Society 33 (9), 1525-1533, 2013 | 87 | 2013 |
Additive manufacturing techniques for fabricating complex ceramic components from preceramic polymers P Colombo, J Schmidt, G Franchin, A Zocca, J Günster Am. Ceram. Soc. Bull 96 (3), 16-23, 2017 | 85 | 2017 |
Design, analysis and additive manufacturing of porous structures for biocompatible micro-scale scaffolds L Podshivalov, CM Gomes, A Zocca, J Guenster, P Bar-Yoseph, A Fischer Procedia Cirp 5, 247-252, 2013 | 85 | 2013 |
Additive manufacturing of SiSiC by layerwise slurry deposition and binder jetting (LSD-print) A Zocca, P Lima, S Diener, N Katsikis, J Günster Journal of the European Ceramic Society 39 (13), 3527-3533, 2019 | 77 | 2019 |
3D printing of porcelain by layerwise slurry deposition P Lima, A Zocca, W Acchar, J Günster Journal of the European Ceramic Society 38 (9), 3395-3400, 2018 | 66 | 2018 |
Method for stabilizing a powder bed by means of vacuum for additive manufacturing J Guenster, A Zocca, CM Gomes, T Muehler US Patent 9,533,452, 2017 | 64 | 2017 |
Enabling the 3D printing of metal components in µ‐gravity A Zocca, J Lüchtenborg, T Mühler, J Wilbig, G Mohr, T Villatte, F Léonard, ... Advanced Materials Technologies 4 (10), 1900506, 2019 | 61 | 2019 |
Challenges in the technology development for additive manufacturing in space A Zocca, J Wilbig, A Waske, J Günster, MP Widjaja, C Neumann, M Clozel, ... Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers …, 2022 | 59 | 2022 |
Powder-bed stabilization for powder-based additive manufacturing A Zocca, CM Gomes, T Mühler, J Günster Advances in mechanical engineering 6, 491581, 2014 | 50 | 2014 |
Development of bioactive silicate-based glass-ceramics from preceramic polymer and fillers H Elsayed, A Zocca, E Bernardo, CM Gomes, J Günster, P Colombo Journal of the European Ceramic Society 35 (2), 731-739, 2015 | 46 | 2015 |
Clay in situ resource utilization with Mars global simulant slurries for additive manufacturing and traditional shaping of unfired green bodies D Karl, T Duminy, P Lima, F Kamutzki, A Gili, A Zocca, J Günster, A Gurlo Acta Astronautica 174, 241-253, 2020 | 40 | 2020 |
Literature review: methods for achieving high powder bed densities in ceramic powder bed based additive manufacturing S Diener, A Zocca, J Günster Open Ceramics 8, 100191, 2021 | 39 | 2021 |
Investigation of the sintering and melting of JSC-2A lunar regolith simulant A Zocca, M Fateri, D Al-Sabbagh, J Günster Ceramics International 46 (9), 14097-14104, 2020 | 38 | 2020 |
Bioactive glass-ceramic scaffolds by additive manufacturing and sinter-crystallization of fine glass powders H Elsayed, A Zocca, J Schmidt, J Günster, P Colombo, E Bernardo Journal of Materials Research 33 (14), 1960-1971, 2018 | 35 | 2018 |
Hardystonite bioceramics from preceramic polymers H Elsayed, A Zocca, G Franchin, E Bernardo, P Colombo Journal of the European Ceramic Society 36 (3), 829-835, 2016 | 35 | 2016 |