| Design Aspects of Harmonic Drive Gear and Performance Improvement of its by Problems Identification: A Review B Routh Advances in Mechanical Design, Materials and Manufacture: AIP Conference …, 2018 | 30 | 2018 |
| An investigation on secondary force contacts of tooth pairs in conventional harmonic drives with involute toothed gear set B Routh, R Maiti, AK Ray, A Sobczyk Proceedings of the Institution of Mechanical Engineers, Part C: Journal of …, 2016 | 25 | 2016 |
| Design and development of strain wave generating cam for a new concept ‘harmonic drive’ R Maiti, I Biswas, V Nema, S Basu, BS Mahanto, B Routh Proceedings of the Institution of Mechanical Engineers, Part C: Journal of …, 2013 | 24 | 2013 |
| Analysis of coning and lubrication at flexspline cup and cam interface in conventional harmonic drives B Routh, R Maiti, AK Ray Industrial Lubrication and Tribology 69 (6), 817-827, 2017 | 18 | 2017 |
| On a gearing problem in conventional harmonic drives with involute toothed gear set B Routh, R Maiti International Design Engineering Technical Conferences and Computers and …, 2011 | 8 | 2011 |
| An analytical method of axial load distribution of deep groove variable clearance radial ball bearings R Sinha, V Sahoo, M Paswan, B Routh Mechanics Based Design of Structures and Machines, 2022 | 6 | 2022 |
| Performance Analysis of Asymmetric Toothed Strain Wave Gear VSAS Bikash Routh Proceedings of the Institution of Mechanical Engineers, Part C: Journal of …, 2021 | 4 | 2021 |
| Aspects of lubrication at the wave generator -flexspline interface in strain wave gearing units B Routh, R Maiti, AK Ray International Gear Conference 2014 181, 709-720, 2014 | 4 | 2014 |
| Spiral spring and planetary gear based regenerative braking system design for bicycles A Khokhri, S Agarwal, SS Yashwardhan, B Routh AIP conference proceedings 2341 (1), 2021 | 2 | 2021 |
| Analysis of infinitely short and infinitely long hydrodynamic journal bearings under micro-polar fluid by direct integration method B Routh ASME conference, Proceedings of the 2017 Gas Turbine India Conference …, 2017 | 2 | 2017 |
| Flow and Fracture Behavior of Copper with Different Strain Rate at Room Temperature P Kumar, NG Rasu, B Routh. International Journal of Mechanical Engineering & Technology 8 (10), 140–146, 2017 | 1 | 2017 |
| Lubrication Mechanism and Lubrication Characteristics Analysis at the Critical Interface of Strain Wave Gear under Different Types of Surface Roughness Assumptions B Routh, DG Solomon, A P M, E Gundbattini NCMMM 2020 2341 (1), 10.1063/5.0049954, 2021 | | 2021 |
| EFFECTS OF SURFACE ROUGHNESS ON LUBRICATION MECHANISM IN THE FLEXSPLINE CUP-CAM INTERFACE OF HARMONIC DRIVE B Routh IndiaTrib – 2019, 2019 | | 2019 |
| Self-Reservoir and Self-Pumping Porous Strain Wave Generating Cam B Routh IN Patent 42/2,019, 2019 | | 2019 |
| Double Inclined Teethed Harmonic Drive with Split Circular Spline and Needle Roller Bearing B Routh IN Patent 42/2,019, 2019 | | 2019 |
| Asymmetric Strain Wave Gearing System B Routh IN Patent 48/2,018, 2018 | | 2018 |
| Effects of pressure angle on initial tooth contacts pattern in conventional harmonic drive B Routh, R Maiti Gears Conference 2018, Lyon, France: Conference Proceedings: Volumes 1 and 2 …, 2018 | | 2018 |
Rathindranath MaitiProfessor of Mechanical Engineering, IIT Kharagpur在 mech.iitkgp.ernet.in 的电子邮件经过验证
