Evaluating the influence of tooth surface wear on TVMS of planetary gear set Z Shen, B Qiao, L Yang, W Luo, X Chen Mechanism and Machine Theory 136, 206-223, 2019 | 100 | 2019 |
Fault mechanism and dynamic modeling of planetary gear with gear wear Z Shen, B Qiao, L Yang, W Luo, Z Yang, X Chen Mechanism and Machine Theory 155, 104098, 2021 | 98 | 2021 |
Physical constraints fused equiangular tight frame method for blade tip timing sensor arrangement S Wu, Z Zhao, Z Yang, S Tian, L Yang, X Chen Measurement 145, 841-851, 2019 | 71 | 2019 |
Convergence rate oriented iterative feedback tuning with application to an ultraprecision wafer stage M Li, Y Zhu, K Yang, L Yang, C Hu, H Mu IEEE Transactions on Industrial Electronics 66 (3), 1993-2003, 2018 | 37 | 2018 |
Mechanism of fast time-varying vibration for rotor–stator contact system: with application to fault diagnosis L Yang, X Chen, S Wang Journal of Vibration and Acoustics 140 (1), 014501, 2018 | 36 | 2018 |
Dynamic coupling vibration of rotating shaft–disc–blade system—Modeling, mechanism analysis and numerical study L Yang, Z Mao, X Chen, R Yan, J Xie, H Hu Mechanism and Machine Theory 167, 104542, 2022 | 30 | 2022 |
Nonlinear dynamic behavior of rotating blade with breathing crack L Yang, Z Mao, S Wu, X Chen, R Yan Frontiers of Mechanical Engineering 16, 196-220, 2021 | 30 | 2021 |
Unsupervised machine anomaly detection using autoencoder and temporal convolutional network Z Li, Y Sun, L Yang, Z Zhao, X Chen IEEE Transactions on Instrumentation and Measurement 71, 1-13, 2022 | 29 | 2022 |
Nonlinear squeezing time-frequency transform and application in rotor rub-impact fault diagnosis S Wang, L Yang, X Chen, C Tong, B Ding, J Xiang Journal of Manufacturing Science and Engineering 139 (10), 101005, 2017 | 29 | 2017 |
Steady-state coupling vibration analysis of shaft–disk–blade system with blade crack LH Yang, Z Mao, SM Wu, XF Chen, RQ Yan Nonlinear Dynamics 105 (1), 61-98, 2021 | 27 | 2021 |
Fatigue life analysis of rolling bearings based on quasistatic modeling W Guo, H Cao, Z He, L Yang Shock and Vibration 2015 (1), 982350, 2015 | 27 | 2015 |
Single-probe blade tip timing: A novel method for anomaly identification based on frequency shift J Cao, Z Yang, H Li, Z Wang, S Tian, L Yang, X Chen IEEE Transactions on Instrumentation and Measurement 70, 1-16, 2021 | 25 | 2021 |
Dynamic characteristic analysis of rotating blade with transverse crack—Part I: Modeling, modification, and validation LH Yang, ZS Yang, Z Mao, SM Wu, XF Chen, RQ Yan Journal of Vibration and Acoustics 143 (5), 051010, 2021 | 24 | 2021 |
Dynamic modeling of planetary gear set with tooth surface wear Z Shen, B Qiao, L Yang, W Luo, R Yan, X Chen Procedia Manufacturing 49, 49-54, 2020 | 21 | 2020 |
Dynamic characteristic analysis of rotating blade with transverse crack—Part II: A comparison study of different crack models LH Yang, ZS Yang, Z Mao, SM Wu, XF Chen, RQ Yan Journal of Vibration and Acoustics 143 (5), 051011, 2021 | 18 | 2021 |
Data-based switching feedforward control for repeating and varying tasks: With application to an ultraprecision wafer stage M Li, Y Zhu, K Yang, L Yang, C Hu IEEE Transactions on Industrial Electronics 66 (11), 8670-8680, 2018 | 17 | 2018 |
Rub-impact detection of rotor systems using time-frequency techniques L Yang, X Chen, S Wang, H Zuo ASME International Mechanical Engineering Congress and Exposition 50558 …, 2016 | 17 | 2016 |
A novel amplitude-independent crack identification method for rotating shaft L Yang, X Chen, S Wang Proceedings of the Institution of Mechanical Engineers, Part C: Journal of …, 2018 | 16 | 2018 |
An improved analytical dynamic model for rotating blade crack: With application to crack detection indicator analysis L Yang, M Ma, S Wu, X Chen, R Yan, Z Mao Journal of Low Frequency Noise, Vibration and Active Control 40 (4), 1935-1961, 2021 | 15 | 2021 |
Multiple-harmonic amplitude and phase control method for active noise and vibration reshaping J Liu, L Yang, L Yang, X Zhang, X Chen Journal of Vibration and Control 24 (14), 3173-3193, 2018 | 15 | 2018 |