| Evaluation of mechanical properties of Al2O3–Cr2O3 ceramic system prepared in different Cr2O3 ratios for ceramic armour components BK Yıldız, H Yılmaz, YK Tür Ceramics International 45 (16), 20575-20582, 2019 | 36 | 2019 |
| Pressureless sintering of Al2O3/Ni nanocomposites produced by heterogeneous precipitation method with varying nickel contents B Kafkaslıoğlu, YK Tür International Journal of Refractory Metals and Hard Materials 57, 139-144, 2016 | 23 | 2016 |
| An investigation of equibiaxial flexural strength and hardness properties of Al2O3–Ni nanocomposites based microstructures with ZrO2 and Cr2O3 additives BK Yıldız, YK Tür Materials Science and Engineering: A 758, 103-111, 2019 | 16 | 2019 |
| Effect of ZrO2 content on the microstructure and flexural strength of Al2O3–ZrO2 composites with the stored failure energy-fragmentation relations BK Yıldız, YK Tür Ceramics International 47 (24), 34199-34206, 2021 | 9 | 2021 |
| Influence of nickel addition on the microstructure and mechanical properties of Al2O3-5vol%ZrO2 ceramic composites prepared via precipitation method BK Yıldız, H Yılmaz, YK Tür International Journal of Minerals, Metallurgy, and Materials 26, 908-914, 2019 | 8 | 2019 |
| Mechanical properties of 3D-printed Al2O3 honeycomb sandwich structures prepared using the SLA method with different core geometries BK Yıldız, AS Yıldız, M Kul, YK Tür, E Işık, C Duran, H Yılmaz Ceramics International 50 (2), 2901-2908, 2024 | 5 | 2024 |
| Processing and mechanical characterization of Al2O3/Ni and Al2O3/C0 composites by pressureless sintering of nanocomposite powders YB Kafkaslioğlu, H Yilmaz, YK Tür Processing and Application of Ceramics 12 (2), 123-128, 2018 | 4 | 2018 |
| Prediction of fracture behavior of Al2O3-Cr2O3 ceramics in different Cr2O3 ratios under flexure load using machine learning methods R Katırcı, B Kafkaslıoğlu Yıldız Computational Materials Science 228, 112362, 2023 | 3 | 2023 |
| Analysis of reciprocating wear behaviour of Al2O3 ceramic composites prepared with nano-Ni, ZrO2, and Cr2O3 additives through heterogeneous precipitation B Kafkaslıoğlu Yıldız, YK Tür Jurnal Tribologi 37, 29-41, 2023 | 1 | 2023 |
| Assessment of mechanical performance of Al2O3 ceramic honeycomb sandwich structures produced with SLA 3D-printing regarding unpolymerized slurry … B Kafkaslıoğlu Yıldız Journal of the Australian Ceramic Society, 1-10, 2024 | | 2024 |
| The effect of sintering temperature and low content of TiO2 on the microstructure and mechanical properties of ZTA-TiO2 composites U Usta, B Kafkaslıoğlu Yıldız, BG Dara Journal of the Australian Ceramic Society, 35-45, 2024 | | 2024 |
| Mechanical Properties of ZTA-Cr2O3 Ceramic Composites Prepared with Nano and Micron Sized of Cr2O3 Powder on Different Ratios U Usta, B Kafkaslıoğlu yıldız Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi 6, 315 - 327, 2023 | | 2023 |
| Microstructure and Bending Strength of Al2O3 Ceramics Doped with Sm2O3 Rare-Earth Oxide in Different Volume Ratios and Sintering Temperatures S TAŞDEMİR, B KAFKASLIOĞLU YILDIZ, E IŞIK, YK TÜR Karadeniz Fen Bilimleri Dergisi 13 (4), 1581, 2023 | | 2023 |
| Investigation of mechanical properties and stored elastic energy fragmentation of Al2O3-Cr2O3 ceramic system with increasing Cr2O3 content B Kafkaslıoğlu Yıldız, YK Tür Processing and Applications of Ceramics 16 (4), 351-357, 2022 | | 2022 |
| Low velocity drop weight impact behaviour of Al2O3-Ni-ZrO2 and Al2O3-Ni-Cr2O3 ceramic composites BK Yıldız, M Büyük, YK Tür Processing and Application of Ceramics 15 (2), 154-163, 2021 | | 2021 |
Yahya K TurGebze Technical University在 gtu.edu.tr 的电子邮件经过验证
