| Influence of tool geometry and rotational speed on mechanical properties and defect formation in friction stir lap welded 5456 aluminum alloy sheets E Salari, M Jahazi, A Khodabandeh, H Ghasemi-Nanesa Materials & Design 58, 381-389, 2014 | 144 | 2014 |
| Evaluation of diffusion welding of 6061 aluminum and AZ31 magnesium alloys without using an interlayer M Jafarian, A Khodabandeh, S Manafi Materials & Design (1980-2015) 65, 160-164, 2015 | 94 | 2015 |
| Influence of filler wire and wire feed speed on metallurgical and mechanical properties of MIG welding–brazing of automotive galvanized steel/5754 aluminum alloy in a lap joint … AM Milani, M Paidar, A Khodabandeh, S Nategh The International Journal of Advanced Manufacturing Technology 82, 1495-1506, 2016 | 77 | 2016 |
| Microstructure and wear behavior of AA6061/SiC surface composite fabricated via friction stir processing with different pins and passes H Eftekharinia, AA Amadeh, A Khodabandeh, M Paidar Rare Metals 39 (4), 429-435, 2020 | 64 | 2020 |
| Tool wear characteristics and effect on microstructure in Ti-6Al-4V friction stir welded joints A Fall, MH Fesharaki, AR Khodabandeh, M Jahazi Metals 6 (11), 275, 2016 | 63 | 2016 |
| An investigation on microstructure evolution and mechanical properties during transient liquid phase bonding of stainless steel 316L to Ti–6Al–4V S Zakipour, A Halvaee, AA Amadeh, M Samavatian, A Khodabandeh Journal of Alloys and Compounds 626, 269-276, 2015 | 59 | 2015 |
| Effects of the tool rotational speed and shoulder penetration depth on mechanical properties and failure modes of friction stir spot welds of aluminum 2024-T3 sheets M Paidar, A Khodabandeh, H Najafi, AS Rouh-aghdam Journal of Mechanical Science and Technology 28, 4893-4898, 2014 | 52 | 2014 |
| The effect of mixing molar ratios and sand particles on microstructure and mechanical properties of metakaolin-based geopolymers S Riahi, A Nemati, AR Khodabandeh, S Baghshahi Materials Chemistry and Physics 240, 122223, 2020 | 51 | 2020 |
| The effect of interlayer thickness on liquid state diffusion bonding behavior of dissimilar stainless steel 316/Ti-6Al-4V system S Zakipour, M Samavatian, A Halvaee, A Amadeh, A Khodabandeh Materials Letters 142, 168-171, 2015 | 47 | 2015 |
| Predicting residual stresses and distortion during multisequence welding of large size structures using FEM R Keivani, M Jahazi, T Pham, AR Khodabandeh, MR Afshar The International Journal of Advanced Manufacturing Technology 73, 409-419, 2014 | 43 | 2014 |
| Austenite grain growth modelling in weld heat affected zone of Nb/Ti microalloyed linepipe steel G Khalaj, H Yoozbashizadeh, A Khodabandeh, M Tamizifar Materials Science and Technology 30 (4), 424-433, 2014 | 43 | 2014 |
| Local mechanical properties, microstructure, and microtexture in friction stir welded Ti-6Al-4V alloy A Fall, H Monajati, A Khodabandeh, MH Fesharaki, H Champliaud, ... Materials Science and Engineering: A 749, 166-175, 2019 | 41 | 2019 |
| Investigation of interfacial and mechanical properties of alumina-coated steel fiber reinforced geopolymer composites S Riahi, A Nemati, AR Khodabandeh, S Baghshahi Construction and Building Materials 288, 123118, 2021 | 40 | 2021 |
| Effect of welding parameters (plunge depths of shoulder, pin geometry, and tool rotational speed) on the failure mode and stir zone characteristics of friction stir spot welded … M Paidar, A Khodabandeh, ML Sarab, M Taheri Journal of Mechanical Science and Technology 29, 4639-4644, 2015 | 40 | 2015 |
| Tensile properties and microstructure of ZK60/SiCw composite after extrusion and aging M Tayebi, S Nategh, H Najafi, A Khodabandeh Journal of Alloys and Compounds 830, 154709, 2020 | 39 | 2020 |
| Microstructure and mechanical properties of joints welded by friction-stir welding in aluminum alloy 7075-T6 plates for aerospace application M Mohammadi-pour, A Khodabandeh, S Mohammadi-pour, M Paidar Rare Metals, 1-9, 2016 | 39 | 2016 |
| An investigation on microstructure evolution and mechanical properties during liquid state diffusion bonding of Al2024 to Ti–6Al–4V M Samavatian, A Halvaee, AA Amadeh, A Khodabandeh Materials Characterization 98, 113-118, 2014 | 36 | 2014 |
| Transient liquid phase bonding of Al 2024 to Ti–6Al–4V alloy using Cu–Zn interlayer M Samavatian, A KHODABANDEH, A HALVAEE, AA AMADEH Transactions of Nonferrous Metals Society of China 25 (3), 770-775, 2015 | 35 | 2015 |
| Impact toughness and tensile properties improvement through microstructure control in hot forged Nb-V microalloyed steel AR Khodabandeh, M Jahazi, S Yue, P Bocher ISIJ international 45 (2), 272-280, 2005 | 33 | 2005 |
| Creep Behavior of ZK60 Alloy and ZK60/SiCw Composite After Extrusion and Precipitation Hardening M Tayebi, H Najafi, S Nategh, A Khodabandeh Metals and Materials International 27, 3905-3917, 2021 | 29 | 2021 |
Mohammad JahaziDepartment of Mechanical Engineering, Ecole de Technologie Superieure (ETS), Montreal, Quebec在 etsmtl.ca 的电子邮件经过验证
