| Factors affecting the inclusion potency for acicular ferrite nucleation in high-strength steel welds Y Kang, S Jeong, JH Kang, C Lee Metallurgical and Materials Transactions A 47, 2842-2854, 2016 | 76 | 2016 |
| Deformation mechanisms and texture evolution in high entropy alloy during cold rolling L Kaushik, MS Kim, J Singh, JH Kang, YU Heo, JY Suh, SH Choi International Journal of Plasticity 141, 102989, 2021 | 58 | 2021 |
| Crystal plasticity finite element analysis of ferritic stainless steel for sheet formability prediction JH Kim, MG Lee, JH Kang, CS Oh, F Barlat International Journal of Plasticity 93, 26-45, 2017 | 52 | 2017 |
| Formation of a high-cycle fatigue fracture surface and a crack growth mechanism of ultrafine-grained copper with different stages of microstructural evolution M Goto, SZ Han, K Euh, JH Kang, SS Kim, N Kawagoishi Acta materialia 58 (19), 6294-6305, 2010 | 50 | 2010 |
| Influence of compressive strain on the microstructural evolution of an AlCoCrFeNi high entropy alloy KS Lee, JH Kang, KR Lim, YS Na Materials Characterization 132, 162-168, 2017 | 44 | 2017 |
| Multi-phase refining of an AlCoCrFeNi high entropy alloy by hot compression KS Lee, B Bae, JH Kang, KR Lim, YS Na Materials Letters 198, 81-84, 2017 | 43 | 2017 |
| Effect of wire brushing on warm roll bonding of 6XXX/5XXX/6XXX aluminum alloy clad sheets SH Kim, HW Kim, K Euh, JH Kang, JH Cho Materials & Design 35, 290-295, 2012 | 43 | 2012 |
| Dynamic recrystallization by large strain deformation with a high strain rate in an ultralow carbon steel JH Kang, S Torizuka Scripta Materialia 57 (11), 1048-1051, 2007 | 43 | 2007 |
| Phase-field simulations and microstructural analysis of epitaxial growth during rapid solidification of additively manufactured AlSi10Mg alloy J Park, JH Kang, CS Oh Materials & Design, 2020 | 40 | 2020 |
| Relationship between grain size and ductile-to-brittle transition at room temperature in Fe–18Mn–0.6 C–1.5 Si twinning-induced plasticity steel SY Jo, J Han, JH Kang, S Kang, S Lee, YK Lee Journal of Alloys and Compounds 627, 374-382, 2015 | 40 | 2015 |
| Evaluation of the deviation angle of ferrite from the Kudjumov–Sachs relationship in a low carbon steel by EBSD DW Suh, JH Kang, KH Oh, HC Lee Scripta materialia 46 (5), 375-378, 2002 | 40 | 2002 |
| Grain-structure evolution of brazing-treated A4343/A3003/A4343 aluminum brazing sheets rolled with different reductions SH Kim, JH Kang, K Euh, HW Kim Metals and Materials International 21, 276-285, 2015 | 36 | 2015 |
| Pancake-shaped growth of abnormally-growing Goss grains in Fe–3% Si steel approached by solid-state wetting HK Park, JH Kang, CS Park, CH Han, NM Hwang Materials Science and Engineering: A 528 (7-8), 3228-3231, 2011 | 30 | 2011 |
| Hydride embrittlement resistance of Zircaloy-4 and Zr-Nb alloy cladding tubes and its implications on spent fuel management S Kim, JH Kang, Y Lee Journal of Nuclear Materials, 2021 | 29 | 2021 |
| Twinning-detwinning behavior of E-form Mg alloy sheets during in-plane reverse loading J Singh, MS Kim, L Kaushik, JH Kang, D Kim, E Martin, SH Choi International Journal of Plasticity 127, 102637, 2020 | 28 | 2020 |
| Orientation distribution of proeutectoid ferrite nucleated at prior austenite grain boundaries in vanadium-added steel JY Cho, DW Suh, JH Kang, HC Lee ISIJ international 42 (11), 1321-1323, 2002 | 28 | 2002 |
| Growth of self-textured barium hexaferrite ceramics by normal sintering process and their anisotropic magnetic properties V Annapureddy, JH Kang, H Palneedi, JW Kim, CW Ahn, SY Choi, ... Journal of the European Ceramic Society 37 (15), 4701-4706, 2017 | 26 | 2017 |
| Heterogeneity in deformation and twinning behaviors through the thickness direction in E-form Mg alloy sheets during an Erichsen test J Singh, MS Kim, SE Lee, EY Kim, JH Kang, JH Park, JJ Kim, SH Choi Materials Science and Engineering: A 729, 370-384, 2018 | 23 | 2018 |
| A novel ultra-high-strength duplex Al–Co–Cr–Fe–Ni high-entropy alloy reinforced with body-centered-cubic ordered-phase particles KR Lim, HJ Kwon, JH Kang, JW Won, YS Na Materials Science and Engineering: A 771, 138638, 2020 | 22 | 2020 |
| Effect of external stress on the orientation distribution of ferrite JH Kang, DW Suh, JY Cho, KH Oh, HC Lee Scripta materialia 48 (1), 91-95, 2003 | 20 | 2003 |
Shi-Hoon ChoiDepartment of Advanced Components and Materials Engineering, Sunchon National University在 scnu.ac.kr 的电子邮件经过验证
