| Determination of acceptable quality limit for casting of A356 aluminium alloy: supplier’s quality index (SQI) E Erzi, Ö Gürsoy, Ç Yüksel, M Colak, D Dispinar Metals 9 (9), 957, 2019 | 35 | 2019 |
| Optimal material selection for total hip implant: A finite element case study AT Şensoy, M Çolak, I Kaymaz, F Findik Arabian Journal for Science and Engineering 44 (12), 10293-10301, 2019 | 30 | 2019 |
| Production of functionally graded SiC/Al-Cu-Mg composite by centrifugal casting Ö Savaş, R Kayıkcı, F Fiçici, M Çolak, G Deniz, F Varol Science and Engineering of Composite Materials 23 (2), 155-159, 2016 | 27 | 2016 |
| Influence of different cross sections on fluidity characteristics of A356 M Colak, R Kayikci, D Dispinar Transactions of the Indian Institute of Metals 68, 275-281, 2015 | 24 | 2015 |
| Alüminyum dökümlerinde tane inceltme M Çolak, R Kayıkçı Sakarya University Journal of Science 13 (1), 11-17, 2009 | 21 | 2009 |
| Modification of eutectic Al–Si alloys by Sr and CuSn5 M Çolak Materials Research Express 6 (10), 1065a2, 2019 | 17 | 2019 |
| Melt cleanliness comparison of chlorine fluxing and Ar degassing of secondary Al-4Cu M Çolak, R Kayikci, D Dispinar Metallurgical and Materials Transactions B 47, 2705-2709, 2016 | 15 | 2016 |
| Döküm simülasyon programları üzerine bir değerlendirme M Çolak, R Kayıkcı Metal Dünyası 189, 2-4, 2005 | 14 | 2005 |
| Reproducibility of reduced pressure test results in testing of liquid aluminum gas levels E Tan, AR Tarakcılar, D Dıspınar, M Colak, R Kayıkcı 6th International Advanced Technologies Symposium (IATS’11), 321-324, 2011 | 12 | 2011 |
| Investigating the optimum model parameters for casting process of A356 alloy: A cross-validation using response surface method and particle swarm optimization AT Şensoy, M Çolak, I Kaymaz, D Dispinar Arabian Journal for Science and Engineering 45, 9759-9768, 2020 | 11 | 2020 |
| Effect of copper addition to aluminium alloys on surface roughness in terms of turning operation F Özen, F Fiçici, M Dündar, M Çolak Acta Physica Polonica A 131 (3), 467-469, 2017 | 11 | 2017 |
| Determination of the critical fraction of solid during the solidification of a PM-cast aluminium alloy R Kayikci, M Colak, S Sirin, E Kocaman, N Akar | 11 | 2015 |
| AlTiB Mastır Alaşımı İlavesinin Etial160 Döküm Alaşımı Üzerinde Tane İnceltme Etkisinin İncelenmesi, 5 M Çolak, R Kayıkcı Uluslararası İleri Teknolojiler Sempozyumu (IATS’09), 13-15, 2009 | 11 | 2009 |
| Implementation of statistical process control (SPC) techniques as quality control in cast iron part production M Ucurum, M Çolak, M Çınar, D Dışpınar Journal of engineering precious research and application 1 (3), 14-24, 2016 | 10 | 2016 |
| A356 döküm alaşımında elektromanyetik karıştırmanın mikroyapı ve mekanik özelliklere etkisi M Çolak, R Kayikci Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi 15 (3), 345-351, 2009 | 10 | 2009 |
| GGG-60 Küresel Grafitli Dökme Demirin Aşılayıcı Türü ve Miktarının İçyapı ve Mekanik Özelliklere Etkisinin İncelenmesi E Karadeniz, M Çolak, F Barutçu Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi 6 (1), 275-282, 2017 | 9 | 2017 |
| Investigation of the effect of the addition of grain refiner and modifier addition on wear properties in sand and permanent mould casting of A357 and A380 aluminium alloys M Çolak, İ Arslan International Journal of Cast Metals Research 35 (1-3), 17-23, 2022 | 7 | 2022 |
| Kum Kalıba Dökülen Farklı Alüminyum Alaşımlarının Dökümünde Al5Ti1B ve Al10Sr İlavesinin Mikroyapı Özelliklere Etkisinin İncelenmesi İ ARSLAN, E GAVGALI, M ÇOLAK Academic Platform-Journal of Engineering and Science 7 (2), 237-244, 2019 | 7 | 2019 |
| Modeling of the impact of initial mold temperature, Al5Ti1B and Al10Sr additions on the critical fraction of solid in die casting of aluminum alloys using fuzzy expert system Ç Teke, M Çolak, M Taş, M İpek Polish Acad Sciences Inst Physics, 2019 | 7 | 2019 |
| Si ve Cu elementleri içeren alüminyum döküm alaşimlarinin korozyon özelliklerinin belirlenmesi ve karşilaştirilmasi E Uslu, R Çatar, M Çolak Engineering Sciences 12 (3), 133-140, 2017 | 7 | 2017 |
