Role of {10–12} twinning characteristics in the deformation behavior of a polycrystalline magnesium alloy SG Hong, SH Park, CS Lee Acta Materialia 58 (18), 5873-5885, 2010 | 788 | 2010 |
Stacking fault energy and plastic deformation of fully austenitic high manganese steels: Effect of Al addition KT Park, KG Jin, SH Han, SW Hwang, K Choi, CS Lee Materials Science and Engineering: A 527 (16-17), 3651-3661, 2010 | 371 | 2010 |
Ultrafine grained ferrite–martensite dual phase steels fabricated via equal channel angular pressing: microstructure and tensile properties YI Son, YK Lee, KT Park, CS Lee, DH Shin Acta materialia 53 (11), 3125-3134, 2005 | 358 | 2005 |
An analysis of the strain hardening behavior of ultra-fine grain pure titanium YG Ko, DH Shin, KT Park, CS Lee Scripta Materialia 54 (10), 1785-1789, 2006 | 238 | 2006 |
Work hardening associated with ɛ-martensitic transformation, deformation twinning and dynamic strain aging in Fe–17Mn–0.6 C and Fe–17Mn–0.8 C TWIP steels M Koyama, T Sawaguchi, T Lee, CS Lee, K Tsuzaki Materials Science and Engineering: A 528 (24), 7310-7316, 2011 | 221 | 2011 |
Activation mode dependent {1 0− 1 2} twinning characteristics in a polycrystalline magnesium alloy SH Park, SG Hong, CS Lee Scripta Materialia 62 (4), 202-205, 2010 | 206 | 2010 |
Hydrogen delayed fracture properties and internal hydrogen behavior of a Fe–18Mn–1.5 Al–0.6 C TWIP steel KH So, JS Kim, YS Chun, KT Park, YK Lee, CS Lee ISIJ international 49 (12), 1952-1959, 2009 | 201 | 2009 |
Microstructural influences on hydrogen delayed fracture of high strength steels JS Kim, YH Lee, DL Lee, KT Park, CS Lee Materials Science and Engineering: A 505 (1-2), 105-110, 2009 | 187 | 2009 |
Enhanced osteoblast response to an equal channel angular pressing-processed pure titanium substrate with microrough surface topography JW Park, YJ Kim, CH Park, DH Lee, YG Ko, JH Jang, CS Lee Acta biomaterialia 5 (8), 3272-3280, 2009 | 181 | 2009 |
Effect of deformation on hydrogen trapping and effusion in TRIP-assisted steel JH Ryu, YS Chun, CS Lee, H Bhadeshia, DW Suh Acta Materialia 60 (10), 4085-4092, 2012 | 164 | 2012 |
Effects of equal channel angular pressing temperature on deformation structures of pure Ti I Kim, J Kim, DH Shin, CS Lee, SK Hwang Materials Science and Engineering: A 342 (1-2), 302-310, 2003 | 163 | 2003 |
Microstructural analysis on boundary sliding and its accommodation mode during superplastic deformation of Ti–6Al–4V alloy JS Kim, JH Kim, YT Lee, CG Park, CS Lee Materials Science and Engineering: A 263 (2), 272-280, 1999 | 159 | 1999 |
Effect of anisotropy on the low-cycle fatigue behavior of rolled AZ31 magnesium alloy SH Park, SG Hong, W Bang, CS Lee Materials Science and Engineering: A 527 (3), 417-423, 2010 | 144 | 2010 |
Delayed static failure of twinning-induced plasticity steels YS Chun, KT Park, CS Lee Scripta materialia 66 (12), 960-965, 2012 | 143 | 2012 |
Ultrahigh high-strain-rate superplasticity in a nanostructured high-entropy alloy NTC Nguyen, P Asghari-Rad, P Sathiyamoorthi, A Zargaran, CS Lee, ... Nature communications 11 (1), 2736, 2020 | 141 | 2020 |
Low-temperature superplasticity of ultra-fine-grained Ti-6Al-4V processed by equal-channel angular pressing YG Ko, CS Lee, DH Shin, SL Semiatin Metallurgical and materials transactions A 37, 381-391, 2006 | 135 | 2006 |
Strain path dependence of {1 0− 1 2} twinning activity in a polycrystalline magnesium alloy SG Hong, SH Park, CS Lee Scripta Materialia 64 (2), 145-148, 2011 | 134 | 2011 |
Prediction of flow stress in Ti–6Al–4V alloy with an equiaxed α+ β microstructure by artificial neural networks NS Reddy, YH Lee, CH Park, CS Lee Materials Science and Engineering: A 492 (1-2), 276-282, 2008 | 133 | 2008 |
Low-cycle fatigue characteristics of rolled Mg–3Al–1Zn alloy SH Park, SG Hong, BH Lee, W Bang, CS Lee International Journal of Fatigue 32 (11), 1835-1842, 2010 | 132 | 2010 |
On the transitions of deformation modes of fully austenitic steels at room temperature KT Park, G Kim, SK Kim, SW Lee, SW Hwang, CS Lee Metals and Materials International 16, 1-6, 2010 | 128 | 2010 |