3-D finite element process simulation of micro-end milling Ti-6Al-4V titanium alloy: experimental validations on chip flow and tool wear T Thepsonthi, T Özel Journal of Materials Processing Technology 221, 128-145, 2015 | 240 | 2015 |
Experimental and finite element simulation based investigations on micro-milling Ti-6Al-4V titanium alloy: Effects of cBN coating on tool wear T Thepsonthi, T Özel Journal of Materials Processing Technology 213 (4), 532-542, 2013 | 228 | 2013 |
Multi-objective process optimization for micro-end milling of Ti-6Al-4V titanium alloy T Thepsonthi, T Özel The International Journal of Advanced Manufacturing Technology 63, 903-914, 2012 | 220 | 2012 |
Experiments and finite element simulations on micro-milling of Ti–6Al–4V alloy with uncoated and cBN coated micro-tools T Özel, T Thepsonthi, D Ulutan, B Kaftanoğlu CIRP annals 60 (1), 85-88, 2011 | 190 | 2011 |
Investigation into minimal-cutting-fluid application in high-speed milling of hardened steel using carbide mills T Thepsonthi, M Hamdi, K Mitsui International Journal of Machine Tools and Manufacture 49 (2), 156-162, 2009 | 146 | 2009 |
Swarm intelligent selection and optimization of machining system parameters for microchannel fabrication in medical devices E Vazquez, J Ciurana, CA Rodriguez, T Thepsonthi, T Özel Materials and Manufacturing Processes 26 (3), 403-414, 2011 | 61 | 2011 |
An integrated toolpath and process parameter optimization for high-performance micro-milling process of Ti–6Al–4V titanium alloy T Thepsonthi, T Özel The International Journal of Advanced Manufacturing Technology 75, 57-75, 2014 | 57 | 2014 |
Effect of process parameters in nanosecond pulsed laser micromachining of PMMA-based microchannels at near-infrared and ultraviolet wavelengths D Teixidor, F Orozco, T Thepsonthi, J Ciurana, CA Rodríguez, T Özel The International Journal of Advanced Manufacturing Technology 67, 1651-1664, 2013 | 53 | 2013 |
Nanosecond pulsed laser micromachining of PMMA-based microfluidic channels D Teixidor, T Thepsonthi, J Ciurana, T Özel Journal of manufacturing processes 14 (4), 435-442, 2012 | 51 | 2012 |
Micro milling of titanium alloy Ti-6Al-4V: 3-D finite element modeling for prediction of chip flow and burr formation T Özel, A Olleak, T Thepsonthi Production Engineering 11, 435-444, 2017 | 40 | 2017 |
Micromilling high aspect ratio features using tungsten carbide tools I Llanos, A Agirre, H Urreta, T Thepsonthi, T Özel Proceedings of the Institution of Mechanical Engineers, Part B: Journal of …, 2014 | 29 | 2014 |
Simulation of serrated chip formation in micro-milling of titanium alloy Ti-6Al-4V using 2D elasto-viscoplastic finite element modeling T Thepsonthi, T Özel Production Engineering 10, 575-586, 2016 | 21 | 2016 |
Modeling and optimization of micro-end milling process for micro-manufacturing T Thepsonthi Rutgers The State University of New Jersey, School of Graduate Studies, 2014 | 21 | 2014 |
Finite element simulation of micro-end milling titanium alloy: comparison of viscoplastic and elasto-viscoplastic models T Thepsonthi, T Ozel NAMRI/SME, Madison, Wisconsin 41, 2013 | 9 | 2013 |
Design and prototyping of micro-needle arrays for drug delivery using customized tool-based micro-milling process T Thepsonthi, N Milesi, T Özel Proceedings of the 1st International Conference on Design and Processes for …, 2012 | 8 | 2012 |
Mechanical Micro‐Machining T Özel, T Thepsonthi Micro‐Manufacturing: Design and Manufacturing of Micro‐Products, 235-274, 2011 | 8 | 2011 |
3-D Finite element simulation of micro-milling TI-6AL-4V titanium alloy T Thepsonthi, T Özel 7th International Conference and Exhibition on Design and Production of …, 2013 | 5 | 2013 |
Finite Element Modeling and Simulation of Micro-Milling T Thepsonthi, T Özel Proc. NAMRI/SME 40, 455-463, 2012 | 3 | 2012 |
Micro-milling of Ti-6Al-4V alloy with uncoated and cBN coated micro-tools T Özel, T Thepsonthi, D Ulutan, B Kaftanoğlu Proceedings of the 6th International Conference and Exhibition on Design and …, 2011 | 3 | 2011 |
Development of an Add-On Device Using 3D Printing for the Enhancement of Drug Administration Efficiency of Dry Powder Inhalers (Accuhaler) K Suwanpitak, LY Lim, I Singh, P Sriamornsak, T Thepsonthi, K Huanbutta, ... Pharmaceutics 14 (9), 1922, 2022 | 2 | 2022 |