High‐frequency fatigue behavior of woven‐fiber‐fabric‐reinforced polymer‐derived ceramic‐matrix composites N Chawla, YK Tur, JW Holmes, JR Barber, A Szweda Journal of the American Ceramic Society 81 (5), 1221-1230, 1998 | 91 | 1998 |
Mechanical behaviour of a low-clay translucent whiteware CB Ustundag, YK Tur, A Capoglu Journal of the European Ceramic Society 26 (1-2), 169-177, 2006 | 45 | 2006 |
Periodic tensile overloads in 2024-T3 Al-alloy YK Tür, Ö Vardar Engineering Fracture Mechanics 53 (1), 69-77, 1996 | 40 | 1996 |
Evaluation of mechanical properties of Al2O3–Cr2O3 ceramic system prepared in different Cr2O3 ratios for ceramic armour components BK Yıldız, H Yılmaz, YK Tür Ceramics International 45 (16), 20575-20582, 2019 | 36 | 2019 |
Processing and mechanical properties of textured mullite/zirconia composites C Öztürk, YK Tür Journal of the European Ceramic Society 27 (2-3), 1463-1467, 2007 | 33 | 2007 |
Pressureless sintering of Al2O3/Ni nanocomposites produced by heterogeneous precipitation method with varying nickel contents B Kafkaslıoğlu, YK Tür International Journal of Refractory Metals and Hard Materials 57, 139-144, 2016 | 23 | 2016 |
Templated grain growth of textured mullite/zirconia composites C Duran, YK Tür Materials Letters 59 (2-3), 245-249, 2005 | 22 | 2005 |
An investigation of equibiaxial flexural strength and hardness properties of Al2O3–Ni nanocomposites based microstructures with ZrO2 and Cr2O3 additives BK Yıldız, YK Tür Materials Science and Engineering: A 758, 103-111, 2019 | 16 | 2019 |
Cold sintering-assisted densification of GDC electrolytes for SOFC applications M Murutoglu, T Ucun, O Ulasan, A Buyukaksoy, YK Tur, H Yilmaz International Journal of Hydrogen Energy 47 (45), 19772-19779, 2022 | 15 | 2022 |
Phase formation and texture development in mullite/zirconia composites fabricated by templated grain growth C Duran, YK Tür Journal of materials science 41, 3303-3313, 2006 | 14 | 2006 |
Influence of nickel addition on the microstructure and mechanical properties of Al2O3-5vol%ZrO2 ceramic composites prepared via precipitation method BK Yıldız, H Yılmaz, YK Tür International Journal of Minerals, Metallurgy, and Materials 26, 908-914, 2019 | 10 | 2019 |
Mechanical property characterization of Na1/2Bi1/2TiO3-BaTiO3 ceramics C Efe, H Yilmaz, YK Tur, C Duran International Journal of Chemical Engineering and Applications 5 (5), 429, 2014 | 10 | 2014 |
The effect of 3 mol% Y2O3 stabilized ZrO2 produced by a steric entrapment method on the mechanical and sintering properties of Cr3C2 based cermets A Özer, WM Kriven, YK Tür Materials Science and Engineering: A 556, 878-884, 2012 | 10 | 2012 |
Effect of ZrO2 content on the microstructure and flexural strength of Al2O3–ZrO2 composites with the stored failure energy-fragmentation relations BK Yıldız, YK Tür Ceramics International 47 (24), 34199-34206, 2021 | 9 | 2021 |
Sintering behaviour and mechanical properties of Cr3C2–NiCr cermets A Özer, YK Tür Bulletin of Materials Science 36, 907-911, 2013 | 9 | 2013 |
Cold sintering of anode-supported 8YSZ/NiO-8YSZ bilayers for solid oxide fuel cells T Ucun, M Murutoglu, O Ulasan, E Demirkal, A Buyukaksoy, YK Tur, ... ACS Applied Energy Materials 4 (12), 13748-13758, 2021 | 7 | 2021 |
The effect of 3 mol% Y2O3 stabilized ZrO2 produced by a steric entrapment method on the mechanical and sintering properties of Cr3C2 based cermets A Ozer, WM Kriven, YK Tur Materials Science & Engineering A 556, 878-884, 2012 | 6 | 2012 |
Mechanical properties of 3D-printed Al2O3 honeycomb sandwich structures prepared using the SLA method with different core geometries BK Yıldız, AS Yıldız, M Kul, YK Tür, E Işık, C Duran, H Yılmaz Ceramics International 50 (2), 2901-2908, 2024 | 5 | 2024 |
Processing and mechanical characterization of Al2O3/Ni and Al2O3/Co composites by pressureless sintering of nanocomposite powders. BK Yildiz, H Yilmaz, YK Tür Processing and Application of Ceramics 12 (2), 123-128, 2018 | 4 | 2018 |
Mechanical and Electromechanical Properties of Piezoelectric Ceramic Fibers Drawn by the Alginate Gelation Method E Mensur‐Alkoy, MY Kaya, HA Sarı, O Pekel, R Olukkent, YK Tur, ... International Journal of Applied Ceramic Technology, 2019 | 3 | 2019 |