| Solution combustion synthesis and characterization of strontium substituted hydroxyapatite nanocrystals M Kavitha, R Subramanian, R Narayanan, V Udhayabanu Powder technology 253, 129-137, 2014 | 171 | 2014 |
| Synthesis and characterization of zircon sand/Al-4.5 wt% Cu composite produced by stir casting route S Das, V Udhayabanu, S Das, K Das Journal of materials science 41, 4668-4677, 2006 | 74 | 2006 |
| Synthesis of in-situ NiAl–Al2O3 nanocomposite by reactive milling and subsequent heat treatment V Udhayabanu, KR Ravi, V Vinod, BS Murty Intermetallics 18 (3), 353-358, 2010 | 57 | 2010 |
| Role of partially amorphous structure and alloying elements on the corrosion behavior of Mg–Zn–Ca bulk metallic glass for biomedical applications M Ramya, SG Sarwat, V Udhayabanu, S Subramanian, B Raj, KR Ravi Materials & Design 86, 829-835, 2015 | 55 | 2015 |
| Mechanical activation of aluminothermic reduction of NiO by high energy ball milling V Udhayabanu, N Singh, BS Murty Journal of Alloys and Compounds 497 (1-2), 142-146, 2010 | 51 | 2010 |
| Development of in situ NiAl–Al2O3 nanocomposite by reactive milling and spark plasma sintering V Udhayabanu, KR Ravi, BS Murty Journal of Alloys and Compounds 509, S223-S228, 2011 | 35 | 2011 |
| Influence of heat of formation of B2/L12 intermetallic compounds on the milling energy for their formation during mechanical alloying NC Abhik, R Vivek, V Udhayabanu, BS Murty Journal of Alloys and Compounds 465 (1-2), 106-112, 2008 | 31 | 2008 |
| Microstructural evolution in ultrafine grained Al-graphite composite synthesized via combined use of ultrasonic treatment and friction stir processing R Rajeshkumar, V Udhayabanu, A Srinivasan, KR Ravi Journal of Alloys and Compounds 726, 358-366, 2017 | 25 | 2017 |
| Exploring Mg-Zn-Ca-Based bulk metallic glasses for biomedical applications based on thermodynamic approach M Ramya, SG Sarwat, V Udhayabanu, B Raj, KR Ravi Metallurgical and Materials Transactions A 46, 5962-5971, 2015 | 16 | 2015 |
| Ultrafine-grained, high-strength NiAl with Al2O3 and Al4C3 nanosized particles dispersed via mechanical alloying in toluene with spark plasma sintering V Udhayabanu, KR Ravi, BS Murty Materials Science and Engineering: A 585, 379-386, 2013 | 16 | 2013 |
| Microstructure and Mechanical Property of Fe-Al2O3 Nanocomposites Synthesized by Reactive Milling Followed by Spark Plasma Sintering KR Ravi, A Murugesan, V Udhayabanu, R Subramanian, BS Murty Materials Science Forum 710, 291-296, 2012 | 16 | 2012 |
| Development of Ni-Al2O3 In-Situ Nanocomposite by Reactive Milling and Spark Plasma Sintering V Udhayabanu, KR Ravi, K Murugan, D Sivaprahasam, BS Murty Metallurgical and Materials Transactions A 42, 2085-2093, 2011 | 16 | 2011 |
| Ultrasonic assisted synthesis of Al–Cu/2 vol% Grp composite and its characterization RK Gupta, J Nampoothiri, S Dhamodharan, KR Ravi, V Udhayabanu, ... Journal of Alloys and Compounds 845, 156087, 2020 | 13 | 2020 |
| Solid-state synthesis and electrical conductivity properties of Ba3SrTa2O9 complex perovskite K Kavitha, T Vijayaraghavan, N Gouthami, V Udhayabanu, AM Ashok Materials Characterization 133, 17-24, 2017 | 9 | 2017 |
| Effect of ultrasonic treatment on microstructural and mechanical properties of Al 7075/Grp composite RK Gupta, KR Ravi, V Udhayabanu, DR Peshwe Materials Chemistry and Physics 281, 125905, 2022 | 8 | 2022 |
| Synthesis of Nanocrystalline α-Al2O3 from Nanocrystalline Boehmite Derived from High Energy Ball Milling of Gibbiste V Udhayabanu, BS Murty Transactions of the Indian Institute of Metals 64, 535-540, 2011 | 4 | 2011 |
| Ultrasonic assisted reactive synthesis and characterization of Al–MgAl2O4 in-situ composite A Thakur, RK Gupta, V Udhayabanu, DR Peshwe, YY Mahajan Materials Chemistry and Physics 297, 127311, 2023 | 3 | 2023 |
| Influence of ultrasonic agitation on the abrasive wear characteristics of Al-Cu/2 vol% Grp composite RK Gupta, N Vashishtha, SG Sapate, V Udhayabanu, DR Peshwe Surface Topography: Metrology and Properties 10 (1), 015001, 2022 | 3 | 2022 |
| Structure–Property Correlation in Fe-Al2O3 In Situ Nanocomposite Synthesized by High-Energy Ball Milling and Spark Plasma Sintering V Udhayabanu, KR Ravi, BS Murty Metallurgical and Materials Transactions A 47, 5223-5233, 2016 | 3 | 2016 |
| Materials and Design M Ramya, SG Sarwat, V Udhayabanu, S Subramanian, B Raj, KR Ravi Under revision, 0 | 3 | |
