On the measurement of relative powder-bed compaction density in powder-bed additive manufacturing processes U Ali, Y Mahmoodkhani, SI Shahabad, R Esmaeilizadeh, F Liravi, ... Materials & Design 155, 495-501, 2018 | 113 | 2018 |
Melting modes in laser powder bed fusion S Patel, M Vlasea Materialia 9, 100591, 2020 | 107 | 2020 |
Design, developments, and results from the NIST additive manufacturing metrology testbed (AMMT) B Lane, S Mekhontsev, S Grantham, ML Vlasea, J Whiting, H Yeung, ... University of Texas at Austin, 2016 | 98 | 2016 |
Tailoring green and sintered density of pure iron parts using binder jetting additive manufacturing I Rishmawi, M Salarian, M Vlasea Additive Manufacturing 24, 508-520, 2018 | 89 | 2018 |
Sinter structure analysis of titanium structures fabricated via binder jetting additive manufacturing E Wheat, M Vlasea, J Hinebaugh, C Metcalfe Materials & Design 156, 167-183, 2018 | 85 | 2018 |
On thermal expansion behavior of invar alloy fabricated by modulated laser powder bed fusion H Asgari, M Salarian, H Ma, A Olubamiji, M Vlasea Materials & Design 160, 895-905, 2018 | 73 | 2018 |
Architectural bone parameters and the relationship to titanium lattice design for powder bed fusion additive manufacturing M McGregor, S Patel, S McLachlin, M Vlasea Additive Manufacturing 47, 102273, 2021 | 72 | 2021 |
Pore space characteristics and corresponding effect on tensile properties of Inconel 625 fabricated via laser powder bed fusion M Salarian, H Asgari, M Vlasea Materials Science and Engineering: A 769, 138525, 2020 | 69 | 2020 |
Development of powder bed fusion additive manufacturing test bed for enhanced process control M Vlasea, B Lane, F Lopez, S Mekhontsev, A Donmez Proceedings of the Solid Freeform Fabrication Symposium, 527-539, 2015 | 64* | 2015 |
Powder bed binder jetting additive manufacturing of silicone structures F Liravi, M Vlasea Additive Manufacturing 21, 112-124, 2018 | 63 | 2018 |
On the effect of throughout layer thickness variation on properties of additively manufactured cellular titanium structures E Sheydaeian, Z Fishman, M Vlasea, E Toyserkani Additive Manufacturing 18, 40-47, 2017 | 60 | 2017 |
Control of structural and mechanical properties in bioceramic bone substitutes via additive manufacturing layer stacking orientation M Vlasea, R Pilliar, E Toyserkani Additive Manufacturing 6, 30-38, 2015 | 60 | 2015 |
Systems and methods for additive manufacturing of heterogeneous porous structures and structures made therefrom E Toyserkani, M Vlasea, Y Shanjani US Patent 9,630,249, 2017 | 58 | 2017 |
Chapter 11-Additive Manufacturing for Bone Load Bearing Applications. 3D Bioprinting and Nanotechnology in Tissue Engineering and Regenerative Medicine M Vlasea, A Basalah, A Azhari, R Kandel, E Toyserkani Academic Press, 2015 | 39 | 2015 |
Enhanced tensile ductility of an additively manufactured AlSi10Mg alloy by reducing the density of melt pool boundaries H Chen, S Patel, M Vlasea, Y Zou Scripta Materialia 221, 114954, 2022 | 37 | 2022 |
The effect of reuse cycles on Ti-6Al-4V powder properties processed by electron beam powder bed fusion G Shanbhag, M Vlasea Manufacturing Letters 25, 60-63, 2020 | 35 | 2020 |
Effect of gray scale binder levels on additive manufacturing of porous scaffolds with heterogeneous properties M Vlasea, E Toyserkani, R Pilliar International Journal of Applied Ceramic Technology 12 (1), 62-70, 2015 | 33 | 2015 |
Towards understanding side-skin surface characteristics in laser powder bed fusion S Patel, A Rogalsky, M Vlasea Journal of Materials Research 35 (15), 2055-2064, 2020 | 30 | 2020 |
Experimental characterization and numerical modeling of a micro-syringe deposition system for dispensing sacrificial photopolymers on particulate ceramic substrates M Vlasea, E Toyserkani Journal of Materials Processing Technology 213 (11), 1970-1977, 2013 | 29 | 2013 |
A combined additive manufacturing and micro-syringe deposition technique for realization of bio-ceramic structures with micro-scale channels M Vlasea, Y Shanjani, A Bothe, R Kandel, E Toyserkani The International Journal of Advanced Manufacturing Technology 68, 2261-2269, 2013 | 28 | 2013 |