Characterizing friction in sliding isolation bearings M Kumar, AS Whittaker, MC Constantinou Earthquake Engineering & Structural Dynamics 44 (9), 1409-1425, 2015 | 194 | 2015 |
A proposed rapid visual screening procedure for seismic evaluation of RC-frame buildings in India SK Jain, K Mitra, M Kumar, M Shah Earthquake Spectra 26 (3), 709-729, 2010 | 119 | 2010 |
Seismic isolation of nuclear power plants AS Whittaker, M Kumar, M Kumar Nuclear Engineering and Technology 46 (5), 569-580, 2014 | 54 | 2014 |
Seismic isolation of nuclear power plants using sliding bearings M Kumar, AS Whittaker, MC Constantinou United States Nuclear Regulatory Commission, 2019 | 47 | 2019 |
Extreme earthquake response of nuclear power plants isolated using sliding bearings M Kumar, AS Whittaker, MC Constantinou Nuclear Engineering and Design 316, 9-25, 2017 | 47 | 2017 |
Seismic probabilistic risk assessment for seismically isolated safety-related nuclear facilities M Kumar, AS Whittaker, RP Kennedy, JJ Johnson, A Kammerer Nuclear Engineering and Design 313, 386-400, 2017 | 39 | 2017 |
Ductility reduction factors for masonry-infilled reinforced concrete frames M Kumar, DC Rai, SK Jain Earthquake Spectra 31 (1), 339-365, 2015 | 22 | 2015 |
Effect of seismic hazard definition on isolation-system displacements in nuclear power plants M Kumar, AS Whittaker Engineering Structures 148, 424-435, 2017 | 16 | 2017 |
A rapid visual seismic assessment procedure for RC frame buildings in India SK Jain, K Mitra, M Kumar, M Shah 9th US National and 10th Canadian Conference on Earthquake Engineering, 2010 | 11 | 2010 |
Peak floor accelerations in multistoried buildings VK Gupta, M Kumar, D Kumar International Conference on Earthquake Engineering, Banja Luka, Bosnia and …, 2009 | 8 | 2009 |
Fragility curves for power transmission towers in Odisha, India, based on observed damage during 2019 Cyclone Fani S Raj, M Kumar, U Bhatia https://arxiv.org/abs/2107.06072, 2021 | 5 | 2021 |
Vibration analysis of a system of partially-filled interconnected cylindrical shells representing a fast reactor A Saboo, M Kumar Journal of Fluids and Structures 112, 2022 | 4 | 2022 |
Influence of perimeter supports on the seismic response of plasterboard suspended ceiling systems M Kumar, S Matale, D Rai 17th World Conference on Earthquake Engineering, 2020 | 3 | 2020 |
Seismic isolation of nuclear power plants using sliding isolation bearings M Kumar University at Buffalo, State University of New York, 2015 | 3 | 2015 |
Response prediction for Friction Pendulum bearings considering the dependence of friction on axial pressure, temperature and velocity M Kumar, A Whittaker, M Constantinou 22nd International Conference on Structural Mechanics in Reactor Technology …, 2013 | 3 | 2013 |
Dynamic analysis of a partially-filled cylindrical–conical–cylindrical shell representing a pressure vessel A Saboo, M Kumar Thin-Walled Structures 183, 1-32, 2023 | 2 | 2023 |
Cyclone preparedness strategies for regional power transmission systems in data-scarce coastal regions of India S Raj, U Bhatia, M Kumar International Journal of Disaster Risk Reduction 75, 1-18, 2022 | 2 | 2022 |
Aerodynamic forces on a high-voltage delta-configuration lattice transmission tower segment P Oza, M Kumar, P Mohapatra Journal of Wind Engineering and Industrial Aerodynamics 216, 1-17, 2021 | 2 | 2021 |
An analytical formulation to describe the vibration of a fluid-shell system representing a fast reactor A Saboo, M Kumar 17th World Conference on Earthquake Engineering, 2020 | 2 | 2020 |
Additive manufacturing of self-compacting concrete through controlled heating S Shekhar, M Kumar, R Mathur https://engrxiv.org/sk6nt/, 2020 | 2 | 2020 |