| Preparation and corrosion resistance of pulse electrodeposited Zn and Zn–SiC nanocomposite coatings M Sajjadnejad, A Mozafari, H Omidvar, M Javanbakht Applied Surface Science 300, 1-7, 2014 | 123 | 2014 |
| The effect of changing chemical composition on dissimilar Mg/Al friction stir welded butt joints using zinc interlayer A Abdollahzadeh, A Shokuhfar, JM Cabrera, AP Zhilyaev, H Omidvar Journal of Manufacturing Processes 34, 18-30, 2018 | 93 | 2018 |
| In-situ nanocomposite in friction stir welding of 6061-T6 aluminum alloy to AZ31 magnesium alloy A Abdollahzadeh, A Shokuhfar, JM Cabrera, AP Zhilyaev, H Omidvar Journal of Materials Processing Technology 263, 296-307, 2019 | 88 | 2019 |
| The effect of FSP on mechanical, tribological, and corrosion behavior of composite layer developed on magnesium AZ91 alloy surface M Abbasi, B Bagheri, M Dadaei, HR Omidvar, M Rezaei The International Journal of Advanced Manufacturing Technology 77, 2051-2058, 2015 | 86 | 2015 |
| Influence of bonding variables on transient liquid phase bonding behavior of nickel based superalloy IN-738LC V Jalilvand, H Omidvar, MR Rahimipour, HR Shakeri Materials & Design (1980-2015) 52, 36-46, 2013 | 83 | 2013 |
| Improved electrochemical properties of LiFePO4/graphene cathode nanocomposite prepared by one-step hydrothermal method F Fathollahi, M Javanbakht, H Omidvar, M Ghaemi Journal of Alloys and Compounds 627, 146-152, 2015 | 80 | 2015 |
| Microstructural evolution during transient liquid phase bonding of Inconel 738LC using AMS 4777 filler alloy V Jalilvand, H Omidvar, HR Shakeri, MR Rahimipour Materials Characterization 75, 20-28, 2013 | 77 | 2013 |
| Influence of anodization parameters on the morphology of TiO2 nanotube arrays H Omidvar, S Goodarzi, A Seif, AR Azadmehr Superlattices and Microstructures 50 (1), 26-39, 2011 | 70 | 2011 |
| Evaluation of nanostructured S-doped TiO2 thin films and their photoelectrochemical application as photoanode for corrosion protection of 304 stainless steel SY Arman, H Omidvar, SH Tabaian, M Sajjadnejad, S Fouladvand, ... Surface and Coatings Technology 251, 162-169, 2014 | 67 | 2014 |
| Prediction of hot compression flow curves of Ti–6Al–4V alloy in α+ β phase region MA Shafaat, H Omidvar, B Fallah Materials & Design 32 (10), 4689-4695, 2011 | 66 | 2011 |
| Effects of an overlapping multi-pass friction stir process and rapid cooling on the mechanical properties and microstructure of AZ31 magnesium alloy AA Nia, H Omidvar, SH Nourbakhsh Materials & Design 58, 298-304, 2014 | 65 | 2014 |
| The effect of SiC particle addition during FSW on microstructure and mechanical properties of AZ31 magnesium alloy M Abbasi, A Abdollahzadeh, B Bagheri, H Omidvar Journal of materials engineering and performance 24, 5037-5045, 2015 | 61 | 2015 |
| The effect of substrate's heat treatment on microstructural and mechanical evolution of transient liquid phase bonded IN-738 LC S Shakerin, H Omidvar, SE Mirsalehi Materials & Design 89, 611-619, 2016 | 60 | 2016 |
| Gold recovery from copper anode slime by means of magnetite nanoparticles (MNPs) R Ranjbar, M Naderi, H Omidvar, G Amoabediny Hydrometallurgy 143, 54-59, 2014 | 60 | 2014 |
| Advanced approach to modify friction stir spot welding process B Bagheri, M Abbasi, A Abdollahzadeh, H Omidvar Metals and Materials International 26, 1562-1573, 2020 | 58 | 2020 |
| Investigation of the high-temperature oxidation behavior of the Al0. 5CoCrFeNi high entropy alloy S Abbaszadeh, A Pakseresht, H Omidvar, A Shafiei Surfaces and Interfaces 21, 100724, 2020 | 56 | 2020 |
| The effect of SiC/Al2O3 particles used during FSP on mechanical properties of AZ91 magnesium alloy M Dadaei, H Omidvar, B Bagheri, M Jahazi, M Abbasi International Journal of Materials Research 105 (4), 369-374, 2014 | 49 | 2014 |
| Textural and structural evolution of pulse electrodeposited Ni/diamond nanocomposite coatings M Sajjadnejad, H Omidvar, M Javanbakht, A Mozafari Journal of Alloys and Compounds 704, 809-817, 2017 | 46 | 2017 |
| Studying microstructure and mechanical properties of SiC-incorporated AZ31 joints fabricated through FSW: the effects of rotational and traveling speeds A Abdolahzadeh, H Omidvar, MA Safarkhanian, M Bahrami The International Journal of Advanced Manufacturing Technology 75, 1189-1196, 2014 | 46 | 2014 |
| Incorporation of SiC particles in FS welded zone of AZ31 Mg alloy to improve the mechanical properties and corrosion resistance M Abbasi, A Abdollahzadeh, H Omidvar, B Bagheri, M Rezaei International Journal of Materials Research 107 (6), 566-572, 2016 | 42 | 2016 |
