Effect of selected factors of the production process of stretch film for its resistance to puncture A Pacana, L Bednarova, J Pacana, I Liberko, A Wozny, D Malindzak Przemysl chemiczny 93 (12), 2263-2264, 2014 | 42 | 2014 |
FEM analysis of stress distribution in the hermetic harmonic drive flexspline J Pacana, W Witkowski, J Mucha Strength of Materials 49, 388-398, 2017 | 35 | 2017 |
The study of stickiness of packaging film by Shainin method A Pacana, A Radon-Cholewa, J Pacana, A Wozny Przemysl Chemiczny 94 (8), 1334-1336, 2015 | 33 | 2015 |
Modelling and prototyping of aeronautical planetary gear demonstrator G Budzik, B Kozik, J Pacana, B Żmuda Journal of KONES 17 (3), 49-54, 2010 | 25 | 2010 |
Defining influence of load conditions on distribution and value of stresses in dual-power-path gear wheels applying FEM G Budzik, B Kozik, J Pacana Aircraft Engineering and Aerospace Technology 85 (6), 453-459, 2013 | 21 | 2013 |
Strength analysis of gears in dual-path gearing by means of FEM J Pacana, B Kozik, G Budzik Diagnostyka 16 (1), 41-46, 2015 | 12 | 2015 |
Analysis of Possibilities of Using Polymeric Materials for Testing Prototypes of Harmonic Drive J Pacana, A Pacana Materials Research Proceedings 5, 61-66, 2018 | 11 | 2018 |
Comparative analysis of numerical methods for the determination of contact pattern of spiral bevel gears A Marciniec, J Pacana, JM Pisula, P Fudali Aircraft Engineering and Aerospace Technology 90 (2), 359-367, 2018 | 11 | 2018 |
Strength calculations of dual-power path gearing with FEM J Pacana, A Pacana, L Bednárová Acta Mechanica Slovakia 18 (2), 2014 | 10 | 2014 |
Development of Bevel Gear Motion Transmission Graphs with FEM J Pacana Key Engineering Materials 490, 83-89, 2012 | 10 | 2012 |
Determining of model similarity for flexspline of harmonic drive with the use of FEM and extensometer method G Budzik, B Kozik, J Pacana Journal of KONES 16 (2), 55-60, 2009 | 10 | 2009 |
Wyznaczanie naprężeń zginających w kołach zębatych z zastosowaniem metody elementów skończonych J Pacana, G Budzik, T Kudasik Acta Mechanica Slovaca 3, 0 | 10 | |
The impact of the structural form on the stress distribution in a flexspline of a hermetic harmonic driver J Pacana Journal of Theoretical and Applied Mechanics 58, 2020 | 7 | 2020 |
Analiza poprawności rozwiązania MES w zależności od rodzaju oraz liczby zastosowanych elementów skończonych G Budzik, J Pacana Acta Mechanica Slovaca 3, 2008 | 7 | 2008 |
The impact of geometry errors on the motion transmission of dual path gearing J Pacana, A Pacana Advances in Science and Technology. Research Journal 10 (32), 94-100, 2016 | 6 | 2016 |
The analysis of the kinematic accuracy of the actual harmonic drive on a test bench J Pacana, O Markowska Advances in Manufacturing Science and Technology 40 (1), 2016 | 6 | 2016 |
Application development for analysis of bevel gears engagement using FEM P Fudali, J Pacana Diagnostyka 16, 2015 | 6 | 2015 |
Kryteria doboru modelu numerycznego do obliczeń wytrzymałościowych walcowej przekładni zębatej metodą MES T Markowski, J Pacana, G Budzik Modelowanie Inżynierskie 8 (39), 135-142, 2010 | 6 | 2010 |
Defining instantaneous contact track of aeronautical bevel gear applying finite elements method and rapid prototyping method J Pacana, B Kozik, G Budzik Journal of KONES 17, 379-386, 2010 | 6 | 2010 |
New Construction Solutions of Gear Using in Space Vehicle Control Systems J Pacana, D Siwiec, A Pacana Applied Sciences 12 (23), 12285, 2022 | 5 | 2022 |