Experimental studies of thin-walled steel roof battens subject to pull-through failures M Sivapathasundaram, M Mahendran Engineering Structures 113, 388-406, 2016 | 54 | 2016 |
New pull-out capacity equations for the design of screw fastener connections in steel cladding systems M Sivapathasundaram, M Mahendran Thin-Walled Structures 122, 439-451, 2018 | 31 | 2018 |
Numerical studies and design of thin steel roof battens subject to pull-through failures M Sivapathasundaram, M Mahendran Engineering Structures 146, 54-74, 2017 | 27 | 2017 |
Development of fragility curves for localised pull-through failures of thin steel roof battens M Sivapathasundaram, M Mahendran Engineering Structures 124, 64-84, 2016 | 22 | 2016 |
Development of suitable test methods for the screw connections in cold-formed steel roof battens M Sivapathasundaram, M Mahendran Journal of Structural Engineering 142 (6), 04016025, 2016 | 20 | 2016 |
Pull-out capacity of multiple screw fastener connections in cold-formed steel roof battens M Sivapathasundaram, M Mahendran Journal of Constructional Steel Research 144, 40-52, 2018 | 16 | 2018 |
Numerical modeling of thin-walled steel roof battens subject to pull-through failures M Sivapathasundaram, M Mahendran Journal of Structural Engineering 143 (6), 04017014, 2017 | 14 | 2017 |
Development of suitable strengthening methods for thin steel roof battens subject to pull-through failures M Sivapathasundaram, M Mahendran Journal of Architectural Engineering 24 (2), 04018004, 2018 | 11 | 2018 |
Pull-through failure tests of thin steel roof battens under wind uplift loads M Sivapathasundaram, M Mahendran Proceedings of the 22nd International Specialty Conference on Cold-Formed …, 2014 | 9 | 2014 |
Localised pull-through failures of thin steel roof battens subject to wind uplift loads M Sivapathasundaram Queensland University of Technology, 2016 | 7 | 2016 |
An aquifer characteristic analysis for identifying ground water resource development alternatives in the wet zone of Sri Lanka S Mayooran, SP Manarathna, N Gogulan, R Rajapakse Department of Civil Engineering, University of Moratuwa, 2011 | 5 | 2011 |
Design of thin steel battens subject to pull-through failures M Sivapathasundaram, M Mahendran, K Myuran Structures 41, 1397-1410, 2022 | 4 | 2022 |
Pull-through capacities of cold-formed steel roof battens considering loading rate sensitivity K Myuran, M Mahendran, M Sivapathasundaram Engineering Structures 177, 459-472, 2018 | 4 | 2018 |
Localised screw connection failures in cold-formed steel roofing systems M Sivapathasundaram, M Mahendran Missouri University of Science and Technology, 2018 | 1 | 2018 |
07.23: Effect of loading rate on the pull‐through capacities of cold‐formed steel roof battens M Kathekeyan, M Mahendran, M Sivapathasundaram ce/papers 1 (2-3), 1697-1706, 2017 | 1 | 2017 |
Pull-through capacity design rules for steel roof battens under wind uplift load M Sivapathasundaram, M Mahendran Proceedings of the 17th Australasian Wind Engineering Society Workshop, 112-115, 2015 | 1 | 2015 |
Numerical modeling of thin steel roof battens under wind uplift loads M Sivapathasundaram, M Mahendran Proceedings of the 5th International Congress on Computational Mechanics and …, 2014 | 1 | 2014 |
Design of Thin Steel Roof Battens Subject to Pull-through Failures S Mayooran, M Mahen University of Jaffna, 2022 | | 2022 |
Experimental and numerical studies of thin steel roof battens under wind uplift loads M Sivapathasundaram, M Mahendran Proceedings of the 8th International Conference on Advances in Steel …, 2015 | | 2015 |
Design of light gauge steel roofing systems subject to high wind forces M Sivapathasundaram, M Mahendran Proceedings of the 4th International Conference on Structural Engineering …, 2013 | | 2013 |