| Prediction and experimental verification of the cutting forces in gear form milling: Including eccentricity and run-out tool errors M Svahn, C Andersson, L Vedmar The International Journal of Advanced Manufacturing Technology 82, 111-121, 2016 | 12 | 2016 |
| The undercut criterion of pinion shaper cutters: and an improvement by modifying the basic rack profile M Svahn Journal of Manufacturing Science and Engineering 138 (1), 011011, 2016 | 8 | 2016 |
| Tooth deviations of an involute helical gear manufactured in a simulated hobbing process with introduced errors M Svahn, L Vedmar, C Andersson 1st International Conference on Virtual Machining Process Technology, 2012 | 5 | 2012 |
| The influence of tool tolerances on the gear quality of a gear manufactured by an indexable insert hob M Svahn, L Vedmar, C Andersson VDI-Berichte 2199, 353-365, 2013 | 4 | 2013 |
| A parametric analysis of the surface roughness of teeth shaped by a pinion shaper cutter and guidelines for choosing process parameters M Svahn Proceedings of the Institution of Mechanical Engineers, Part C: Journal of …, 2019 | 3 | 2019 |
| Gear tooth surface roughness of helical gears manufactured by a form milling cutter M Svahn, L Vedmar, C Andersson International gear conference 1, 96-106, 2014 | 3 | 2014 |
| On the Machining of Involute Helical Gears-Prediction models on tool geometry, cut gear tooth surface topography, chip geometry, and tool cutting forces M Svahn | 2 | 2016 |
| Prediction of the cutting forces in gear hobbing and the wear behavior of the individual hob cutting teeth M Svahn, L Vedmar, C Andersson Int. J. Manufacturing Research, 2018 | 1 | 2018 |
| Prediction of alignment deviations on a lead crowned helical gear manufactured by a hob M Svahn, L Vedmar International Journal of Manufacturing Research 5 9 (1), 58-73, 2014 | 1 | 2014 |
| Material testing at intermediate strain rates and parameter identification using inverse analysis M Svahn Division of Solid Mechanics, Lund University, 2010 | 1 | 2010 |
| Parallel-kinematic machine with versatile tool orientation CS Torgny Brogardh, Klas Nilsson, Adam Nilsson, Mattias Svahn, Edvin Malm US Patent US20230339099A1, 2023 | | 2023 |
| Optimum dog-leg angle for mass and bearing force optimization of multistage gear reduction M Svahn, R Hjelm Proceedings of the Institution of Mechanical Engineers, Part D: Journal of …, 2022 | | 2022 |
| Minimizing refining steps for gears M Svahn, L Vedmar, C Andersson | | 2015 |
| Undervisning av studenter med varierande förkunskaper A Andersson, P Borgqvist, M Rasmussen, M Svahn Project Reports-Genombrottet, LTH, 2013 | | 2013 |
| Alignment Deviations on a Lead Crowned Helical Gear Manufactured by a Hob M Svahn, L Vedmar Swedish Production Symposium, 2012, 287-294, 2012 | | 2012 |
