| The fabrication of SiBCN ceramic components from preceramic polymers by digital light processing (DLP) 3D printing technology S Li, W Duan, T Zhao, W Han, L Wang, R Dou, G Wang Journal of the European Ceramic Society 38 (14), 4597-4603, 2018 | 146 | 2018 |
| A mechanistic understanding on rumpling of a NiCoCrAlY bond coat for thermal barrier coating applications Y Chen, X Zhao, M Bai, L Yang, C Li, L Wang, JA Carr, P Xiao Acta Materialia 128, 31-42, 2017 | 109 | 2017 |
| Digital light processing of lunar regolith structures with high mechanical properties M Liu, W Tang, W Duan, S Li, R Dou, G Wang, B Liu, L Wang Ceramics International 45 (5), 5829-5836, 2019 | 72 | 2019 |
| Partially stabilized zirconia moulds fabricated by stereolithographic additive manufacturing via digital light processing L Wang, X Liu, G Wang, W Tang, S Li, W Duan, R Dou Materials Science and Engineering: A 770, 138537, 2020 | 44 | 2020 |
| Additive manufacturing of SiBCN/Si 3 N 4 w composites from preceramic polymers by digital light processing S Li, Y Zhang, T Zhao, W Han, W Duan, L Wang, R Dou, G Wang RSC advances 10 (10), 5681-5689, 2020 | 44 | 2020 |
| Thermal conductivities and mechanical properties of AlN ceramics fabricated by three dimensional printing W Duan, S Li, G Wang, R Dou, L Wang, Y Zhang, H Li, H Tan Journal of the European Ceramic Society 40 (10), 3535-3540, 2020 | 42 | 2020 |
| Sintering of lunar regolith structures fabricated via digital light processing R Dou, WZ Tang, L Wang, S Li, WY Duan, M Liu, YB Zhang, G Wang Ceramics International 45 (14), 17210-17215, 2019 | 41 | 2019 |
| Ceramic paste for space stereolithography 3D printing technology in microgravity environment R Dou, W Tang, K Hu, L Wang Journal of the European Ceramic Society 42 (9), 3968-3975, 2022 | 28 | 2022 |
| Additive manufacturing of low-shrinkage alumina cores for single-crystal nickel-based superalloy turbine blade casting W Tang, T Zhao, R Dou, L Wang Ceramics International 48 (11), 15218-15226, 2022 | 24 | 2022 |
| Characterisation of microstructure and hardness of perovskite-structured Ba0. 5Sr0. 5Co0. 8Fe0. 2O3− δ under different sintering conditions L Wang, R Dou, M Bai, Y Li, D Hall, Y Chen Journal of the European Ceramic Society 36 (7), 1659-1667, 2016 | 21 | 2016 |
| Influence of surface finishing and printing layer orientation on surface roughness and flexural strength of stereolithography-manufactured dental zirconia Y Lu, L Wang, AMO Dal Piva, JPM Tribst, I Nedeljkovic, CJ Kleverlaan, ... Journal of the Mechanical Behavior of Biomedical Materials 143, 105944, 2023 | 19 | 2023 |
| Fabrication of highly translucent yttria-stabilized zirconia ceramics using stereolithography-based additive manufacturing L Wang, H Yu, Z Hao, W Tang, R Dou Ceramics International 49 (11), 17174-17184, 2023 | 16 | 2023 |
| Fabrication of high-strength Si/SiC composites with low shrinkage rates via vat photopolymerization technology and liquid silicon infiltration W Tang, T Zhao, R Dou, L Wang Additive Manufacturing 59, 103168, 2022 | 16 | 2022 |
| Effect of Fe2O3 doping on color and mechanical properties of dental 3Y-TZP ceramics fabricated by stereolithography-based additive manufacturing L Wang, L Yao, W Tang, R Dou Ceramics International 49 (8), 12105-12115, 2023 | 15 | 2023 |
| Fracture strength and Weibull analysis of Ba0. 5Sr0. 5Co0. 8Fe0. 2O3− δ oxygen transport membranes evaluated by biaxial and uniaxial bending tests LI Wang, R Dou, G Wang, Y Li, M Bai, D Hall, Y Chen Materials Science and Engineering: A 670, 292-299, 2016 | 11 | 2016 |
| Microstructure and mechanical properties of Ba0. 5Sr0. 5Co0. 8Fe0. 2O3− δ perovskite-structured oxides doped with different contents of Ni L Wang, R Dou, Y Li, H Lu, M Bai, D Hall, Y Chen Materials Science and Engineering: A 658, 280-288, 2016 | 11 | 2016 |
| A case study of mechanical properties of perovskite-structured Ba0. 5Sr0. 5Co0. 8Fe0. 2O3− δ oxygen transport membrane L Wang, R Dou, G Wang, Y Li, M Bai, D Hall, Y Chen Journal of the European Ceramic Society 38 (2), 647-653, 2018 | 10 | 2018 |
| Effect of printing layer orientation and polishing on the fatigue strength of 3D-printed dental zirconia Y Lu, L Wang, AMO Dal Piva, JPM Tribst, SM Čokić, F Zhang, A Werner, ... Dental Materials 40 (2), 190-197, 2024 | 9 | 2024 |
| Investigating the effect of solid loading on microstructure, mechanical properties, and translucency of highly translucent zirconia ceramics prepared via stereolithography … L Wang, H Yu, Z Hao, W Tang, R Dou Journal of the Mechanical Behavior of Biomedical Materials 144, 105952, 2023 | 7 | 2023 |
| Subcritical crack growth behavior of a perovskite‐structured Ba0.5Sr0.5Co0.8Fe0.2O3−δ oxygen transport membrane L Wang, R Dou, G Wang, Y Li, M Bai, D Hall, Y Chen International Journal of Applied Ceramic Technology 15 (1), 63-73, 2018 | 4 | 2018 |
