| A simulation and experimental study on the deep drawing process of SPCC sheet using the graphical method TT Luyen, VC Tong, DT Nguyen Alexandria Engineering Journal 61 (3), 2472-2483, 2022 | 24 | 2022 |
| A study on a deep-drawing process with two shaping states for a fuel-filter cup using combined simulation and experiment L The-Thanh, B Tien-Long, T The-Van, N Duc-Toan Advances in Mechanical Engineering 11 (8), 1687814019872674, 2019 | 15 | 2019 |
| Assessment of the Effect of Thermal-Assisted Machining on the Machinability of SKD11 Alloy Steel TB Mac, TT Luyen, DT Nguyen Metals 13 (4), 699, 2023 | 13 | 2023 |
| A Study for improved prediction of the cutting force and chip shrinkage coefficient during the SKD11 alloy steel milling TB Mac, TT Luyen, DT Nguyen Machines 10 (4), 229, 2022 | 12 | 2022 |
| APPLICATION OF A GRAPHICAL METHOD ON ESTIMATING FORMING LIMIT CURVE OF AUTOMOTIVE SHEET METALS QT Pham, J Kim, TT Luyen, DT Nguyen, YS Kim International Journal of Automotive Technology 20, 3-8, 2019 | 11 | 2019 |
| Application/Comparison Study of a Graphical Method of Forming Limit Curve Estimation for DP590 Steel Sheets TT Luyen, QT Pham, YS Kim, DT Nguyen 한국정밀공학회지 36 (9), 883-890, 2019 | 11* | 2019 |
| The Impact of High-Speed and Thermal-Assisted Machining on Tool Wear and Surface Roughness during Milling of SKD11 Steel TB Mac, TT Luyen, DT Nguyen Metals 13 (5), 971, 2023 | 9 | 2023 |
| Investigating the impact of yield criteria and process parameters on fracture height of cylindrical cups in the deep drawing process of SPCC sheet steel TT Luyen, TB Mac, TL Banh, DT Nguyen The International Journal of Advanced Manufacturing Technology 128 (5-6 …, 2023 | 8 | 2023 |
| Improved uniformity in cylindrical cup wall thickness at elevated temperatures using deep drawing process for SPCC sheet steel TT Luyen, DT Nguyen Journal of the Brazilian Society of Mechanical Sciences and Engineering 45 …, 2023 | 8 | 2023 |
| Simulation and experimental comparison study based on predicting forming limit curve of SUS304 sheet material TT Luyen, TB Mac, DT Nguyen Modern Physics Letters B 37 (16), 2340001, 2023 | 5 | 2023 |
| A Study Utilizing Numerical Simulation and Experimental Analysis to Predict and Optimize Flange-Forming Force in Open-Die Forging of C45 Billet Tubes THL Phan, TT Luyen, DT Nguyen Applied Sciences 13 (16), 9063, 2023 | 4 | 2023 |
| Graphical method based on modified maximum force criterion to indicate forming limit curves of 22MnB5 boron steel sheets at elevated temperatures TT Luyen, QT Pham, TB Mac, TL Banh, DT Nguyen Journal of Iron and Steel Research International, 1-10, 2021 | 4 | 2021 |
| A Study on Yield Criteria Influence on Anisotropic Behavior and Fracture Prediction in Deep Drawing SECC Steel Cylindrical Cups QH Trieu, TT Luyen, DT Nguyen, NT Bui Materials 17 (12), 2872, 2024 | 1 | 2024 |
| Investigating the correlation between surface roughness and degree of chip segmentation in A7075 aluminum alloy milling across varied cutting speeds THIHOA PHAM, THET LUYEN, DUCT NGUYEN Sādhanā 49 (2), 193, 2024 | 1 | 2024 |
| Enhancing/Improving Forming Limit Curve and Fracture Height Predictions in the Single-Point Incremental Forming of Al1050 Sheet Material TK Hoang, TT Luyen, DT Nguyen Materials 16 (23), 7266, 2023 | 1 | 2023 |
| Influence of Blank Holder Force and Limiting Drawing Ratio on Fracture Height During Cup—Drawing Process of SECC Sheet Metal TB Mac, NQ Ly, TT Luyen International Conference on Material, Machines and Methods for Sustainable …, 2022 | 1 | 2022 |
| A Study for Improved Prediction of the Cutting Force and Chip Shrinkage Coefficient during the SKD11 Alloy Steel Milling. Machines 2022, 10, 229 TB Mac, TT Luyen, DT Nguyen s Note: MDPI stays neutral with regard to jurisdictional claims in published …, 2022 | 1 | 2022 |
| Improving parameters for achieving uniform cylindrical cup wall thickness in two-step deep drawing processes with SPCC sheet material TT Luyen, DT Nguyen Proceedings of the Institution of Mechanical Engineers, Part E: Journal of …, 2024 | | 2024 |
| A Combined simulation and experimental investigation on tool radius influence on enhancing the formability SPIF process for Al1050 sheet material TT Luyen, TK Hoang, DT Nguyen International Journal of Modern Physics B, 2540024, 2024 | | 2024 |
| Analyzing cutting force and vibration amplitude in high-speed milling of SKD11 steel with thermal assistance TT Luyen, TB Mac, DT Nguyen International Journal of Modern Physics B, 2540018, 2024 | | 2024 |
Duc Toan NguyenProfessor at Hanoi University of Science and Technology在 hust.vn 的电子邮件经过验证
