| Mechanical properties and microstructure of AlSi10Mg alloy obtained by casting and SLM technique K Zygula, B Nosek, K Pasiowiec, N Szysiak World Scientific News 104, 2018 | 77 | 2018 |
| Evaluation of hot workability of nickel-based superalloy using activation energy map and processing maps O Lypchanskyi, T Śleboda, K Zyguła, A Łukaszek-Sołek, M Wojtaszek Materials 13 (16), 3629, 2020 | 19 | 2020 |
| Application of the strain compensation model and processing maps for description of hot deformation behavior of metastable β titanium alloy O Lypchanskyi, T Śleboda, A Łukaszek-Sołek, K Zyguła, M Wojtaszek Materials 14 (8), 2021, 2021 | 14 | 2021 |
| The investigation on flow behavior of powder metallurgy Ti-10V-2Fe-3Al alloy using the prasad stability criterion K Zyguła, M Wojtaszek, O Lypchanskyi, T Śleboda, G Korpała, U Prahl Metallurgical and Materials transactions a 50, 5314-5323, 2019 | 14 | 2019 |
| The influence of induction sintering on microstructure and deformation behavior of Ti-5Al-5Mo-5V-3Cr alloy K Zyguła, M Wojtaszek, T Śleboda, S Lech, O Lypchanskyi, G Korpała, ... Metallurgical and Materials Transactions A 52, 1699-1713, 2021 | 11 | 2021 |
| The analysis of hot deformation behavior of powder metallurgy Ti-10V-2Fe-3Al alloy using activation energy and Zener-Hollomon parameter K Zyguła, M Wojtaszek, T Śleboda, O Lypchanskyi, M Rumiński, ... Procedia Manufacturing 50, 546-551, 2020 | 8 | 2020 |
| Hot processing of powder metallurgy and wrought Ti-6Al-4V alloy with large total deformation: Physical modeling and verification by rolling M Wojtaszek, G Korpała, T Śleboda, K Zyguła, U Prahl Metallurgical and Materials transactions a 51, 5790-5805, 2020 | 7 | 2020 |
| The Design of Ti-5Al-5Mo-5V-3Cr Elemental Powders Mixture Processing K Zyguła, M Wojtaszek Archives of Metallurgy and Materials 65 (1), 283-289, 2020 | 7 | 2020 |
| Application of processing maps and numerical modelling for identification of parameters and limitations of hot forging process of 80MnSi8-6 steel M Wojtaszek, Ł Lisiecki, A Łukaszek-Sołek, G Korpała, K Zyguła, ... Archives of Civil and Mechanical Engineering 23 (4), 240, 2023 | 6 | 2023 |
| Hot deformation behavior of Ti-Al-Sn-Zr-Mo alloy O Lypchanskyi, T Śleboda, K Zyguła, M Wojtaszek, M Rumiński Procedia Manufacturing 50, 63-68, 2020 | 4 | 2020 |
| Forging of PM Ti–6Al–4V alloy at the temperature above β-transus and high strain rate: Modeling and trials in industrial conditions M Wojtaszek, K Zyguła, A Łukaszek-Sołek, M Jabłońska, R Stanik, ... Archives of Civil and Mechanical Engineering 23 (2), 102, 2023 | 3 | 2023 |
| Processing and Characterization of β Titanium Alloy Composite Using Power Metallurgy Approach K Zyguła, M Wojtaszek Materials 15 (17), 5800, 2022 | 3 | 2022 |
| Extrusion of Al-Si alloy compacts under conventional conditions and in the semi-solid state K Zyguła, O Lypchanskyi, M Wojtaszek, T Śleboda IOP Conf Ser: Mater Sci Eng 461 (1), 012096, 2018 | 3 | 2018 |
| Characterization of Ti-6Al-2Sn-4Zr-6Mo alloy flow behaviour using Malas’s stability criterion O Lypchanskyi, K Zyguła, T Śleboda, M Wojtaszek, A Łukaszek-Sołek IOP Conference Series: Materials Science and Engineering 461 (1), 012048, 2018 | 2 | 2018 |
| Physical Modeling of Hot Forging of Cast and P/M Ti-6Al-4V Alloy K Zyguła, T Śleboda, M Wojtaszek, G Korpała METAL 2017 – 26th International Conference on Metallurgy and Materials, 1977 …, 2017 | 2* | 2017 |
| Manufacturing and properties of al-al alloy bimetallic composites obtained from powders by hot extrusion M Wojtaszek, K Zyguła Composites Theory and Practice 22, 2022 | 1 | 2022 |
| Microstructure Prediction of 80MnSi8-6 Steel After Hot Deformation Based on Dynamic Recrystallization Kinetics and FEM Simulation K Zyguła, K Cichocki, K Kowalczyk, M Puławski, G Korpała, M Wojtaszek, ... JOM, 1-17, 2024 | | 2024 |
| A Comprehensive Study on Hot Deformation Behavior of the Metastable β Titanium Alloy Prepared by Blended Elemental Powder Metallurgy Approach K Zyguła, O Lypchanskyi, A Łukaszek-Sołek, G Korpała, R Stanik, ... Metallurgical and Materials Transactions A 55 (3), 933–954, 2024 | | 2024 |
| Evaluation of cracking risk of 80MnSi8-6 nanobainitic steel during hot forging in the range of lower temperature limits P Lisiecka-Graca, Ł Lisiecki, K Zyguła, M Wojtaszek Materials Science-Poland 42 (1), 171-185, 2024 | | 2024 |
| Microstructure and Mechanical Properties of In Situ Synthesized Metastable β Titanium Alloy Composite from Low-Cost Elemental Powders K Zyguła, T Mrotzek, O Lypchanskyi, D Zientara, M Gude, U Prahl, ... Materials 16 (23), 7438, 2023 | | 2023 |
Marek WojtaszekAGH University of Science and Technology在 metal.agh.edu.pl 的电子邮件经过验证
