| Effect of cooling rate on the high strain rate properties of boron steel A Bardelcik, CP Salisbury, S Winkler, MA Wells, MJ Worswick International Journal of Impact Engineering 37 (6), 694-702, 2010 | 264 | 2010 |
| The use of water cooling during the continuous casting of steel and aluminum alloys J Sengupta, BG Thomas, MA Wells Metallurgical and Materials Transactions A 36, 187-204, 2005 | 199 | 2005 |
| A new grain orientation spread approach to analyze the dynamic recrystallization behavior of a cast-homogenized Mg-Zn-Zr alloy using electron backscattered diffraction A Hadadzadeh, F Mokdad, MA Wells, DL Chen Materials Science and Engineering: A 709, 285-289, 2018 | 192 | 2018 |
| A strain rate sensitive constitutive model for quenched boron steel with tailored properties A Bardelcik, MJ Worswick, S Winkler, MA Wells International Journal of Impact Engineering 50, 49-62, 2012 | 154 | 2012 |
| The influence of martensite, bainite and ferrite on the as-quenched constitutive response of simultaneously quenched and deformed boron steel–Experiments and model A Bardelcik, MJ Worswick, MA Wells Materials & Design 55, 509-525, 2014 | 106 | 2014 |
| Modeling the microstructural changes during hot tandem rolling of AA5XXX aluminum alloys: Part I. Microstructural evolution MA Wells, IV Samarasekera, JK Brimacombe, EB Hawbolt, DJ Lloyd Metallurgical and Materials Transactions B 29 (3), 611-620, 1998 | 104* | 1998 |
| A mathematical model coupled to CALPHAD to predict precipitation kinetics for multicomponent aluminum alloys Q Du, WJ Poole, MA Wells Acta Materialia 60 (9), 3830-3839, 2012 | 101 | 2012 |
| Experimental heat transfer coefficient measurements during hot forming die quenching of boron steel at high temperatures EJFR Caron, KJ Daun, MA Wells International Journal of Heat and Mass Transfer 71, 396-404, 2014 | 97 | 2014 |
| Effect of subsurface thermocouple installation on the discrepancy of the measured thermal history and predicted surface heat flux during a quench operation DI Li, MA Wells Metallurgical and Materials Transactions B 36, 343-354, 2005 | 92 | 2005 |
| Process parameters for hot stamping of AA7075 and D-7xxx to achieve high performance aged products K Omer, A Abolhasani, S Kim, T Nikdejad, C Butcher, M Wells, S Esmaeili, ... Journal of Materials Processing Technology 257, 170-179, 2018 | 83 | 2018 |
| Microstructure evolution during homogenization of Al–Mn–Fe–Si alloys: Modeling and experimental results Q Du, WJ Poole, MA Wells, NC Parson Acta Materialia 61 (13), 4961-4973, 2013 | 83 | 2013 |
| Modelling of microstructure evolution during hot rolling of AA5083 using an internal state variable approach integrated into an FE model H Ahmed, MA Wells, DM Maijer, BJ Howes, MR Van Der Winden Materials Science and Engineering: A 390 (1-2), 278-290, 2005 | 81 | 2005 |
| Role of compression direction on recrystallization behavior and texture evolution during hot deformation of extruded ZK60 magnesium alloy A Hadadzadeh, MA Wells, SK Shaha, H Jahed, BW Williams Journal of Alloys and Compounds 702, 274-289, 2017 | 77 | 2017 |
| Tensile properties of as-cast aluminum alloy AA5182 close to the solidus temperature LJ Colley, MA Wells, DM Maijer Materials Science and Engineering: A 386 (1-2), 140-148, 2004 | 72 | 2004 |
| Low-cycle fatigue characterization and texture induced ratcheting behaviour of forged AZ80 Mg alloys A Gryguc, SB Behravesh, SK Shaha, H Jahed, M Wells, B Williams, X Su International Journal of Fatigue 116, 429-438, 2018 | 68 | 2018 |
| Development and validation of a thermal model of the direct chill casting of AZ31 magnesium billets H Hao, DM Maijer, MA Wells, SL Cockcroft, D Sediako, S Hibbins Metallurgical and Materials Transactions A 35, 3843-3854, 2004 | 65 | 2004 |
| Advanced light metals casting development: solidification of aluminium alloy A356 S Thompson, SL Cockcroft, MA Wells Materials science and technology 20 (2), 194-200, 2004 | 65 | 2004 |
| Numerical modelling of the material flow during extrusion of aluminium alloys and transverse weld formation Y Mahmoodkhani, MA Wells, N Parson, WJ Poole Journal of Materials Processing Technology 214 (3), 688-700, 2014 | 63 | 2014 |
| Constitutive modeling of Mg–9Li–3Al–2Sr–2Y at elevated temperatures G Wei, X Peng, A Hadadzadeh, Y Mahmoodkhani, W Xie, Y Yang, ... Mechanics of materials 89, 241-253, 2015 | 61 | 2015 |
| Experimental characterization of heat transfer coefficients during hot forming die quenching of boron steel E Caron, KJ Daun, MA Wells Metallurgical and Materials Transactions B 44, 332-343, 2013 | 61 | 2013 |
