| Designable dual-material auxetic metamaterials using three-dimensional printing K Wang, YH Chang, YW Chen, C Zhang, B Wang Materials & Design 67, 159-164, 2015 | 262 | 2015 |
| Quantitative prediction of paravalvular leak in transcatheter aortic valve replacement based on tissue-mimicking 3D printing Z Qian, K Wang, S Liu, X Zhou, V Rajagopal, C Meduri, JR Kauten, ... JACC: Cardiovascular Imaging 10 (7), 719-731, 2017 | 136 | 2017 |
| Low-loss 3-D multilayer transmission lines and interconnects fabricated by additive manufacturing technologies F Cai, YH Chang, K Wang, C Zhang, B Wang, J Papapolymerou IEEE Transactions on Microwave Theory and Techniques 64 (10), 3208-3216, 2016 | 103 | 2016 |
| Controlling the mechanical behavior of dual-material 3D printed meta-materials for patient-specific tissue-mimicking phantoms K Wang, Y Zhao, YH Chang, Z Qian, C Zhang, B Wang, MA Vannan, ... Materials & Design 90, 704-712, 2016 | 87 | 2016 |
| Aerosol jet printing for 3-D multilayer passive microwave circuitry F Cai, S Pavlidis, J Papapolymerou, YH Chang, K Wang, C Zhang, ... 2014 44th European Microwave Conference, 512-515, 2014 | 86 | 2014 |
| High resolution aerosol jet printing of D-band printed transmission lines on flexible LCP substrate F Cai, Y Chang, K Wang, WT Khan, S Pavlidis, J Papapolymerou 2014 IEEE MTT-S International Microwave Symposium (IMS2014), 1-3, 2014 | 68 | 2014 |
| Conductive-on-demand: Tailorable polyimide/carbon nanotube nanocomposite thin film by dual-material aerosol jet printing K Wang, YH Chang, C Zhang, B Wang Carbon 98, 397-403, 2016 | 61 | 2016 |
| A facile method for integrating direct-write devices into three-dimensional printed parts YH Chang, K Wang, C Wu, Y Chen, C Zhang, B Wang Smart Materials and Structures 24 (6), 065008, 2015 | 50 | 2015 |
| Evaluation of quality of printed strain sensors for composite structural health monitoring applications K Wang, YH Chang, C Zhang, B Wang SAMPE Fall Technical Conference, Wichita, KS, Oct, 21-24, 2013 | 16 | 2013 |
| Process monitoring, modeling, and quality assessment for printed electronics with aerosol jet printing technology YH Chang Georgia Institute of Technology, 2017 | 7 | 2017 |
| 2.4 GHz low cost low noise amplifier on flexible organic substrate F Cai, AÇ Ulusoy, J Papapolymerou 2013 Asia-Pacific Microwave Conference Proceedings (APMC), 270-272, 2013 | 6 | 2013 |
| 3-D printing of biological tissue-mimicking aortic root using a novel meta-material technique: Potential clinical applications Z Qian, K Wang, YH Chang, C Zhang, B Wang, V Rajagopal, C Meduri, ... Journal of the American College of Cardiology 67 (13S), 7-7, 2016 | 4 | 2016 |
| Rapid Prototyping of the Aortic Root in Severe Aortic Stenosis for Pre-TAVR Planning Z Qian, C Wu, Y Chang, C Zhang, B Wang, V Rajagopal, S Liu, X Zhou, ... Circulation 130 (suppl_2), A20259-A20259, 2014 | | 2014 |
