| A simplified technique for shakedown limit load determination HF Abdalla, MM Megahed, MYA Younan Nuclear Engineering and Design 237 (12-13), 1231-1240, 2007 | 91 | 2007 |
| Evaluation of spur gear mesh compliance using the finite element method MH Arafa, MM Megahed Proceedings of the Institution of Mechanical Engineers, Part C: Journal of …, 1999 | 90 | 1999 |
| Fracture toughness characterization of austempered ductile iron produced using both conventional and two-step austempering processes AH Elsayed, MM Megahed, AA Sadek, KM Abouelela Materials & Design 30 (6), 1866-1877, 2009 | 82 | 2009 |
| The shot-peening effect on the HCF behavior of high-strength martensitic steels AM Eleiche, MM Megahed, NM Abd-Allah Journal of Materials Processing Technology 113 (1-3), 502-508, 2001 | 70 | 2001 |
| Fatigue crack growth in double cantilever beam specimen with an adhesive layer MM Abou-Hamda, MM Megahed, MMI Hammouda Engineering Fracture Mechanics 60 (5-6), 605-614, 1998 | 69 | 1998 |
| Influence of reverse yielding on residual stresses induced by autofrettage MM Megahed, AT Abbas International journal of mechanical sciences 33 (2), 139-150, 1991 | 61 | 1991 |
| Influence of hardening rule on the elasto-plastic behaviour of a simple structure under cyclic loading MM Megahed International Journal of Mechanical Sciences 23 (3), 169-182, 1981 | 50 | 1981 |
| Shakedown Limits of a Pipe Bend Using Small and Large Displacement Formulations HF Abdalla, MM Megahed, MYA Younan | 39 | 2007 |
| Determination of shakedown limit load for a 90-degree pipe bend using a simplified technique HF Abdalla, MM Megahed, MYA Younan | 38 | 2006 |
| 3D finite element modeling of in-service sleeve repair welding of gas pipelines AR Alian, M Shazly, MM Megahed International Journal of Pressure Vessels and Piping 146, 216-229, 2016 | 34 | 2016 |
| Applications of iterative elastic techniques for elastic-plastic analysis of pressure vessels AI Mohamed, MM Megahed, LS Bayoumi, MYA Younan | 33 | 1999 |
| Shakedown limit loads for 90 degree scheduled pipe bends subjected to steady internal pressure and cyclic bending moments HF Abdalla, MM Megahed, MYA Younan | 30 | 2011 |
| A simplified technique for shakedown limit load determination of a large square plate with a small central hole under cyclic biaxial loading HF Abdalla, MM Megahed, MYA Younan Nuclear Engineering and Design 241 (3), 657-665, 2011 | 26 | 2011 |
| Comparison of pipe bend ratchetting/shakedown test results with the shakedown boundary determined via a simplified technique HF Abdalla, MM Megahed, MYA Younan ASME Pressure Vessels and Piping Conference 43666, 659-666, 2009 | 25 | 2009 |
| Elastoplastic analysis of rotating shrink-fitted discs with nonlinear hardening characteristics MM Megahed, MS Abdel-Kader International journal of solids and structures 30 (6), 751-765, 1993 | 23 | 1993 |
| Elastic-plastic behaviour of a thick-walled tube with general nonlinear hardening properties MM Megahed International journal of mechanical sciences 32 (7), 551-563, 1990 | 23 | 1990 |
| Shakedown analysis of 90-degree mitred pipe bends AG Korba, MM Megahed, HF Abdalla, MM Nassar European Journal of Mechanics-A/Solids 40, 158-165, 2013 | 22 | 2013 |
| Low-cycle fatigue in rotating cantilever under bending II: experimental investigations on smooth specimens AM Eleiche, MM Megahed, NM Abd-Allah International journal of Fatigue 18 (8), 577-592, 1996 | 22 | 1996 |
| Shakedown limit load determination for a kinematically hardening 90 deg pipe bend subjected to steady internal pressures and cyclic bending moments HF Abdalla, MYA Younan, MM Megahed | 21 | 2011 |
| Prediction of bending fatigue behaviour by the reference stress approach MM Megahed Fatigue & Fracture of Engineering Materials & Structures 13 (4), 361-374, 1990 | 20 | 1990 |
Hany Fayek AbdallaFull Professor of Solid Mechanics and Design在 aucegypt.edu 的电子邮件经过验证
