| Analysis of the evolution of the Built-Up Edge and Built-Up Layer formation mechanisms in the dry turning of aeronautical aluminium alloys A Gómez-Parra, M Álvarez-Alcón, J Salguero, M Batista, M Marcos Wear 302 (1-2), 1209-1218, 2013 | 205 | 2013 |
| Characterization and Defect Analysis of Machined Regions in Al-SiC metal matrix composites using an abrasive water jet machining process PF Mayuet Ares, L Rodriguez-Parada, A Gomez-Parra, M Batista Ponce Applied Sciences 10 (4), 1512, 2020 | 29 | 2020 |
| Processing and quality evaluation of additive manufacturing monolayer specimens C Wendt, SR Fernández-Vidal, Á Gómez-Parra, M Batista, M Marcos Advances in Materials Science and Engineering 2016 (1), 5780693, 2016 | 23 | 2016 |
| Study of the tool wear process in the dry turning of Al–Cu alloy M Batista, I Del Sol, A Gomez-Parra, M Ramirez-Peña, J Salguero Metals 9 (10), 1094, 2019 | 16 | 2019 |
| Study of the influence of cutting parameters on the Ultimate Tensile Strength (UTS) of UNS A92024 alloy dry turned bars A Gómez-Parra, FJ Puerta, EI Rosales, JM González-Madrigal, M Marcos Procedia Engineering 63, 796-803, 2013 | 15 | 2013 |
| SOM-SEM-EDS identification of tool wear mechanisms in the dry-machining of aerospace titanium alloys M Álvarez, Á Gómez-Parra, J Salguero, M Batista, MM Huerta, ... Advanced Materials Research 107, 77-82, 2010 | 15 | 2010 |
| Identification, analysis and evolution of the mechanisms of wear for secondary adhesion for dry turning processes of Al-Cu alloys M Batista, J Salguero, Á Gómez-Parra, MS Carrilero, M Álvarez, ... Advanced Materials Research 107, 141-146, 2010 | 15 | 2010 |
| SOM based methodology for evaluating shrinkage parameter of the chip developed in titanium dry turning process M Batista, J Salguero, A Gomez-Parra, S Fernández-Vidal, M Marcos Procedia CIRP 8, 534-539, 2013 | 14 | 2013 |
| Preliminary study of the influence of manufacturing parameters in fused deposition modeling AP Valerga, M Batista, SR Fernandez, A Gomez-Parra, M Barcena Proceedings of the 26th DAAAM International Symposium, 1004-1008, 2016 | 13 | 2016 |
| Cutting speed-feed based parametric model for macro-geometrical deviations in the dry turning of UNS A92024 Al-Cu alloys JM Sánchez-Sola, M Batista, J Salguero Gómez, Á Gómez-Parra, ... Key Engineering Materials 504, 1311-1316, 2012 | 12 | 2012 |
| Evaluation of the functional performance in turned workpieces: Methodology and application to UNS A92024-T3 Á Gómez-Parra, A Sanz, AJ Gámez Materials 11 (8), 1264, 2018 | 8 | 2018 |
| Experimental methodology for evaluating workpieces surface integrity in dry turning of aerospace alloys JM Clares, JM Vazquez-Martinez, A Gomez-Parra, FJ Puerta, M Marcos Proceedings of the 26th DAAAM International Symposium, 0849-0855, 2016 | 8 | 2016 |
| 3D-FEM based methodology for analysing contour milling processes of Ti Alloys M Batista, A Morales, A Gómez-Parra, J Salguero, FJ Puerta, M Marcos Procedia Engineering 132, 1136-1143, 2015 | 8 | 2015 |
| Influence of the dry turning parameters on the Ultimate Tensile Strength (UTS) of UNS A92024 samples Á Gómez-Parra, FJ Puerta-Morales, EI Rosales, D García-Jurado, ... Materials Science Forum 797, 65-70, 2014 | 8 | 2014 |
| Tribological wear analysis of laser surface treated Ti6Al4V based on volume lost evaluation JM Vazquez Martinez, J Salguero Gómez, FJ Botana, Á Gómez-Parra, ... Key Engineering Materials 615, 82-87, 2014 | 7 | 2014 |
| Estudio de la influencia del mecanizado en el rendimiento funcional de aleaciones de aluminio de uso estratégico en la industria aeronáutica ÁG Parra Estudio de la influencia del mecanizado en el rendimiento funcional de …, 2016 | 5 | 2016 |
| An analysis of the influence of cutting parameters on the turning process on the fatigue life of aluminum alloy UNS A92024-T351 Á Gómez-Parra, A Sanz, M Marcos Bárcena Advanced Materials Research 498, 19-24, 2012 | 5 | 2012 |
| An analysis of geometrical models for evaluating the influence of feed rate on the roughness of dry turned UNS A92050 (Al-Cu-Li) alloy J Salguero, FJ Puerta, A Gomez-Parra, FJ Trujillo, L Sevilla, M Marcos Advances in Materials and Processing Technologies 2 (4), 578-589, 2016 | 4 | 2016 |
| Taylor’s model based analysis of turning inserts tool-life in the dry turning of UNS R56400 alloy M Batista, P Davim, J Salguero, A Gomez-Parra, M Marcos ASME International Mechanical Engineering Congress and Exposition 46421 …, 2014 | 4 | 2014 |
| Digital modeling of end-mill cutting tools for FEM applications from the active cutting contour J Salguero, M Marcos, M Batista, A Gómez, P Mayuet, R Bienvenido AIP Conference Proceedings 1431 (1), 37-42, 2012 | 4 | 2012 |
