| Progressive fatigue failure behavior of glass/epoxy (±75) 2 filament-wound pipes under pure internal pressure L Gemi, N Tarakçioğlu, A Akdemir, ÖS Şahin Materials & Design 30 (10), 4293-4298, 2009 | 112 | 2009 |
| Fracture behavior of glass fiber reinforced polymer composite A Avci, H Arikan, A Akdemir Cement and Concrete Research 34 (3), 429-434, 2004 | 111 | 2004 |
| Fracture toughness (Mode I) characterization of SiO2 nanoparticle filled basalt/epoxy filament wound composite ring with split-disk test method MT Demirci, N Tarakçıoğlu, A Avcı, A Akdemir, I Demirci Composites Part B: Engineering 119, 114-124, 2017 | 85 | 2017 |
| Characterization of styrene butadiene rubber and microwave devulcanized ground tire rubber composites F Karabork, E Pehlivan, A Akdemir Journal of Polymer Engineering 34 (6), 543-554, 2014 | 77 | 2014 |
| Experimental investigation of fatigue damage formation of hybrid pipes subjected to impact loading under internal pre-stress L Gemi, ÖS Şahin, A Akdemir Composites Part B: Engineering 119, 196-205, 2017 | 75 | 2017 |
| The fatigue behavior of (±55) 3 filament wound GRP pipes with a surface crack under internal pressure N Tarakcioglu, A Samanci, H Arikan, A Akdemir Composite structures 80 (2), 207-211, 2007 | 67 | 2007 |
| Effect of non-penetrating impact damages of pre-stressed GRP tubes at low velocities on the burst strength M Kara, M Uyaner, A Avci, A Akdemir Composites Part B: Engineering 60, 507-514, 2014 | 66 | 2014 |
| Strength of filament wound GRP pipes with surface crack N Tarakcioglu, A Akdemir, A Avci Composites Part B: Engineering 32 (2), 131-138, 2001 | 61 | 2001 |
| Mixed-mode fracture behavior of glass fiber reinforced polymer concrete A Avci, A Akdemir, H Arikan Cement and Concrete Research 35 (2), 243-247, 2005 | 59 | 2005 |
| Mechanical and microstructural properties of low-carbon steel-plate-reinforced gray cast iron A Avcı, N Ilkaya, M Şimşir, A Akdemir Journal of materials processing technology 209 (3), 1410-1416, 2009 | 53 | 2009 |
| Stress corrosion crack growth in glass/polyester composites with surface crack A Akdemir, N Tarakcioglu, A Avci Composites Part B: Engineering 32 (2), 123-129, 2001 | 46 | 2001 |
| Fatigue crack growth behavior of filament wound composite pipes in corrosive environment ÖS Sahin, A Akdemir, A Avci, L Gemi Journal of Reinforced Plastics and Composites 28 (24), 2957-2970, 2009 | 44 | 2009 |
| The effects of cutting speed and depth of cut on machinability characteristics of austempered ductile iron A Akdemir, Ş Yazman, H Saglam, M Uyaner | 39 | 2012 |
| Effect of silica/graphene nanohybrid particles on the mechanical properties of epoxy coatings UE Ozcan, F Karabork, S Yazman, A Akdemir Arabian Journal for Science and Engineering 44, 5723-5731, 2019 | 37 | 2019 |
| Mechanical properties and microstructure of composites produced by recycling metal chips A Aslan, A Güneş, E Salur, ÖS Şahin, HB Karadağ, A Akdemir International Journal of Minerals, Metallurgy, and Materials 25, 1070-1079, 2018 | 37 | 2018 |
| Friction and wear properties of friction materials containing nano/micro-sized SiO2 particles KB Sugozu, B Daghan, A Akdemir, N Ataberk Industrial Lubrication and Tribology 68 (2), 259-266, 2016 | 35 | 2016 |
| The mechanical properties of composite materials recycled from waste metallic chips under different pressures A Aslan, E Salur, A Gunes, OS Sahin, HB Karadag, A Akdemir International Journal of Environmental Science and Technology 16 (9), 5259-5266, 2019 | 29 | 2019 |
| Fabrication and characterization of bismuth oxide–holmia nanofibers and nanoceramics A Aytimur, S Koçyiğit, İ Uslu, Ş Durmuşoğlu, A Akdemir Current Applied Physics 13 (3), 581-586, 2013 | 28 | 2013 |
| Investigation of the tensile properties of continuous steel wire-reinforced gray cast iron composite A Akdemir, R Kuş, M Şimşir Materials Science and Engineering: A 528 (10-11), 3897-3904, 2011 | 28 | 2011 |
| Impact toughness and microstructure of continuous steel wire-reinforced cast iron composite A Akdemir, R Kuş, M Şimşir Materials Science and Engineering: A 516 (1-2), 119-125, 2009 | 28 | 2009 |
Ahmet AVCIProfessor of Mechanical Engineering, Necmettin Erbakan University在 erbakan.edu.tr 的电子邮件经过验证
